AK Sponsor
Midwest Industries Keymod AK handguard -- Now Shipping! (Page 2 of 3)
|
A few quick pictures of the receiver filler plate.
Note, this may require fitting to your AK, all AK receivers are different. 
Cavity in the front of the AK receiver, not all AK's are open here and some are different shapes. 
With the plate installed. 
With MI-AK hand guard installed. 
Thank You Andy MI |
Midwest Industries Inc.
Quality Manufacturers of Tactical Rifle Accessories
www.midwestindustriesinc.com
Quality Manufacturers of Tactical Rifle Accessories
www.midwestindustriesinc.com
I'm in for at least one. It looks like something I might be able to use to modify my Arsenal flashlight handguard to fit my AKS-74U as well as filling the Gap of Doom on other handguards. I understand the fitting issue as well...the same AKS-74U has been a PITA to fit any type furniture to it. 
EDIT: Andy, when you put it in place do you recommend anything to secure it, or do you just shave, if necessary, material off to get a snug fit in the gap? |
As I stated we will be adding these to our web site for anyone who would like to purchase one.These have been on the shelf for two years so it is not something new or revolutionary . Lets please keep this thread about the key mod hand guards. 
THANK YOU Troy |
Midwest Industries Inc.
Quality Manufacturers of Tactical Rifle Accessories
www.midwestindustriesinc.com
Quality Manufacturers of Tactical Rifle Accessories
www.midwestindustriesinc.com
Wow. Keymod looks nice. Got an idea for the VEPR version, or full length version. Could also apply to others like Saiga. either keymod or SS. Instead of a top cover run two fillet panels along the gas tube. one on each side using the existing top cover mount holes. Folk who like the clean gas tube look and don't need a rail up there would be satisfied.
PS think of it as filling the gap of gas 
|
|
Originally Posted By CPT1-285TH:
EDIT: Andy, when you put it in place do you recommend anything to secure it, or do you just shave, if necessary, material off to get a snug fit in the gap? The plate is usually faily snug and cannot move around in the receiver, but if you wanted you could lightly loctite it in place. It cannot fall out the front as the hand guard blocks it, and it cannot fall out the rear as the receiver is in the way. If you have any questions about how it works or installs please send me an email at [email protected] . Thank You Andy MI |
Midwest Industries Inc.
Quality Manufacturers of Tactical Rifle Accessories
www.midwestindustriesinc.com
Quality Manufacturers of Tactical Rifle Accessories
www.midwestindustriesinc.com
|
Troy and Andy, I like what you guys are doing and already own several of your very well made rails. You can not please all the people all the time. Keep on putting out great products and we will keep on buying them.
I like the plug, and keeping the weight down.....folks who put a lot of rounds through their guns usually do. Well done. R |
Sean Thomas Wissink EOW 2-11-07 Miss you brother
Controlled Chaos Arms Practical Training for the Real World
Controlled Chaos Arms Practical Training for the Real World
|
Originally Posted By Dferg10:
When will the receiver filler plate be available for purchase? They are available here: AK Receiver Block Thank You Andy MI |
Midwest Industries Inc.
Quality Manufacturers of Tactical Rifle Accessories
www.midwestindustriesinc.com
Quality Manufacturers of Tactical Rifle Accessories
www.midwestindustriesinc.com
| Just wanted to say thanks to Andy from MI. The customer service at Midwest was excellent in answering all my questions and I am very impressed with the AK keymod handguard & doom plate I received the other day. The shipping was super fast and the handguard appears to be in line with the other high quality products they offer. I will be mounting a T-1 and AFG2 to it asap for some field testing, hopefully keymod accessories keep coming to market with increasing frequency so impatient people like myself don't have to frankenstein their stuff to fit. |
|
Originally Posted By hkinfl:
Wait wait..........these are in stock?......
Give me a call tomorrow if you are interested in the KeyMod AK hand guard. I'll be at SHOT next week so call Friday the 10th if you want one. Thank You Andy MI |
Midwest Industries Inc.
Quality Manufacturers of Tactical Rifle Accessories
www.midwestindustriesinc.com
Quality Manufacturers of Tactical Rifle Accessories
www.midwestindustriesinc.com
|
Originally Posted By Midwest_Ind:
Give me a call tomorrow if you are interested in the KeyMod AK hand guard. I'll be at SHOT next week so call Friday the 10th if you want one. Thank You Andy MI Originally Posted By Midwest_Ind:
Originally Posted By hkinfl:
Wait wait..........these are in stock?......
Give me a call tomorrow if you are interested in the KeyMod AK hand guard. I'll be at SHOT next week so call Friday the 10th if you want one. Thank You Andy MI Are the KeyMod handguards available for Veprs x39? Thx! |
|
Originally Posted By f150guy:
Are the KeyMod handguards available for Veprs x39? Thx! Due to the lack of demand for VEPR products, probably not in the immediate future. Thank You Andy MI |
Midwest Industries Inc.
Quality Manufacturers of Tactical Rifle Accessories
www.midwestindustriesinc.com
Quality Manufacturers of Tactical Rifle Accessories
www.midwestindustriesinc.com
|
Originally Posted By Midwest_Ind:
Give me a call tomorrow if you are interested in the KeyMod AK hand guard. I'll be at SHOT next week so call Friday the 10th if you want one. Thank You Andy MI Originally Posted By Midwest_Ind:
Originally Posted By hkinfl:
Wait wait..........these are in stock?......
Give me a call tomorrow if you are interested in the KeyMod AK hand guard. I'll be at SHOT next week so call Friday the 10th if you want one. Thank You Andy MI Damn.....how did I miss this........................I'll try to call after SHOT
|
"I guess your not here about the Alcohol or Tobacco"..Nicolas Cage in "Lord of War"
| I know youre probably very busy with SHOT but i gotta ask...are there any plans to manufacture an extended yugo model in the near future? If so i will wait but i am told damage industries is releasing a yugo rail handguard soon. I am trying to get my support hand out in front of the gas block and would love to get your extended handguard. |
|
Originally Posted By JeepApex:
Any info as to whether or not there will be an extended length version? If so, any possible release date? This is a project that we will do when we have machine time available. Thank you, PETE MI |
Midwest Industries Inc.
Quality Manufacturers of Tactical Rifle Accessories
www.midwestindustriesinc.com
Quality Manufacturers of Tactical Rifle Accessories
www.midwestindustriesinc.com
|
**Update with pics**
Finally got some time to make it out to the range for pic's. Solid lockup with the rifle and zero change in poi after a few hundred rounds. Shooting at a pretty quick pace it started to get a little warm around 200 rounds. If I were shooting full auto I would probably put some gloves on after the 4th or 5th mag dump. Other than the increase in heat (which I was expecting) no issues at all. I will try to get some action shots next time I bring it to training.    
|
|
Originally Posted By 4719DAVE:
what a tease wont fit my yugo uder folder correct or did i miss something  I had one on my n-pap, top rail is a bit short, other than that it was good to go. Not sure if they would sell just the top section for the yugo rail... Anyways I refinished my wood grips and put them back on so my key mod is on the bench for now. |
|
Good afternoon, was looking at your site to order the AK Receiver plate today but when I place the order am not able to get a total cost as all shipping methods are listed as TBD. Would it be possible to know how much shipping would be for the item? I am going to order the rail through a distributor I have access to but it appears no one carries the receiver plate but your site.
Thank you |
|
If you need a shipping cost call the shop. We do not give a pre determined price. We weigh the package and charge you exactly what U.P.S charges us. We do not make a penny on shipping.
Thanks. Troy.
|
Midwest Industries Inc.
Quality Manufacturers of Tactical Rifle Accessories
www.midwestindustriesinc.com
Quality Manufacturers of Tactical Rifle Accessories
www.midwestindustriesinc.com
|
seriously MI I hate you guys so bad right now...I have a stupid amount of Aks that are sporting your rails and I already had to go from the shorts to the long rails on over half of them..now I can't stop thinking key mods for some of the flock.. Makes me sad happy... thanks for the great products for our beloved aks..
Can I also throw out a product request for your company? Can you guys maybe help out the Styer Aug community with a rail+side rail that replaces the folder grip? Styer has a version but a extended lower rail for bipods would be amazing...just a thought.. Thanks again
|
I recently got mine and installed it...I have to say I am much more pleased with it than the polymer one that came on my AK...To Put it simply....This handguard Rocks... I also did a vid on it...overview and install.... SASS   |
JOIN THE PRIDE
"Fight back! Whenever you are offered violence, fight back! The aggressor does not fear the law, so he must be taught to fear you. Whatever the risk, and at whatever the cost, fight back!"
- Col. Jeff Cooper
"Fight back! Whenever you are offered violence, fight back! The aggressor does not fear the law, so he must be taught to fear you. Whatever the risk, and at whatever the cost, fight back!"
- Col. Jeff Cooper
Midwest Industries Keymod AK handguard -- Now Shipping! (Page 2 of 3)
AK Sponsor