AK Sponsor
Magpul AK Furniture (Page 5 of 9)
|
Originally Posted By blackghost:
THANKS dude! I realllly want one of these for my MAK90 also. How much material did you need to relieve for it to fit? Do you still feel confident that it's sturdy enough after you fit the stock to the action? There are some very slight raised ridges to keep the stock aligned along the sides. I took a slivers worth off of them due to the extra thickness of my reciever. Then when bottoming the stock into the reciever the right side and bottom hit first,stopping the holes from lining up. It took a 1/16"or so with the sawzall blade by hand to get it properly seated. It is 100% sturdy. Possibly more than most because it just barely fits. Its tight and not wiggiling anywhere. |
|
Originally Posted By Fedele:
Nice, not really sure on this but, I have a milled century sporter with two tangs; one slightly angled. will either of magpul's buttstock offerings fit said milled receiver? I'm pretty sure it won't. Give them time though, their sales of the "stamped" ones will give them incentive. 
|
Aimless: "No one is losing their free dental for your 2A rights"
|
Originally Posted By willi3d:
The handguards should fit on any AK with a standard front end. The receiver type doesn't matter. However the the receiver type does make a difference for the stock. The Magpul stocks are designed for stamped receivers. Originally Posted By willi3d:
Originally Posted By DOG556:
So this would not fit on the DDI Milled AKs? The handguards should fit on any AK with a standard front end. The receiver type doesn't matter. However the the receiver type does make a difference for the stock. The Magpul stocks are designed for stamped receivers. The DDI AKs have the thicker Hungarian trunions so you'll have to shave the handguard some to get it to fit. |
| I just order the Zhukov's from AIM, but having to dremel off the retainer is going to be the hardest thing to do emotionally. I'll have to love the look, because it's pretty much permanent. I tried pulling the front sight off so I could simply remove the retainer, and although I got the pins out, that son-of-a-bitch wouldn't budge. Oh well, I like the way the Zhukov parts look, but I'm glad I have another AK, and that one will remain in its virgin state. |
As much as my response will bother you, I don't care about grammar, punctuation, or spelling. I'm a budding, failing comedian, not an English major. Deal with it!
|
Originally Posted By tire_iron:
I did an install video for the Zhukov handguard. Zhukov install video cheers tire iron I really appreciate the install video, you really did a great job with the explanation. I wish you would have shown cutting off the retainer, but I can imagine how to do it. Maybe you have a few pearls of wisdom you could share about that. |
As much as my response will bother you, I don't care about grammar, punctuation, or spelling. I'm a budding, failing comedian, not an English major. Deal with it!
|
Originally Posted By Dragynn:
And de-value your rifles by about 100 bucks, as no other standard furniture will ever work again unless the rifle is repaired. What will be really hilarious is the look on owner's faces when they go to sell the rifle and get offered a lot less than the rifles currently go for, and start stuttering about how it's not worth less it's worth more because magpul is so awesome and all and JUST EVERYBODY loves the magpul handguards and what's wrong with you it's MAGPUL ZOMG! Used WASR missing it's handguard retainer = $400 bucks maybe, personally I wouldn't be a buyer unless it were closer to 300.  Anyone selling an AK in the upcoming climate would be a fool, that is unless they are AK rich. Me, I only have two, so I'd sell a kidney first. 
In fact maybe I need to buy another one just in case the political shit hits the rapidly spinning blades. |
As much as my response will bother you, I don't care about grammar, punctuation, or spelling. I'm a budding, failing comedian, not an English major. Deal with it!
|
Originally Posted By OnlytheTip:
I really appreciate the install video, you really did a great job with the explanation. I wish you would have shown cutting off the retainer, but I can imagine how to do it. Maybe you have a few pearls of wisdom you could share about that. Originally Posted By OnlytheTip:
Originally Posted By tire_iron:
I did an install video for the Zhukov handguard. Zhukov install video cheers tire iron I really appreciate the install video, you really did a great job with the explanation. I wish you would have shown cutting off the retainer, but I can imagine how to do it. Maybe you have a few pearls of wisdom you could share about that. I took the dremel to my milled Arsenal SLR-95, retainer was gone in 10 min, no regrets. I wrapped the barrel before and after the retainer in electric tape so it was decently thick just for some extra slip of the cut off wheel protection. I used a 1 1/4" metal cutoff wheel on full RPMs and just cut a little at a time, stopping and inspecting how much further I would have to go every 5-7 seconds. Did one nice cut on each side and it knocked right off with a hammer |
|
Originally Posted By OnlytheTip:
I really appreciate the install video, you really did a great job with the explanation. I wish you would have shown cutting off the retainer, but I can imagine how to do it. Maybe you have a few pearls of wisdom you could share about that. Originally Posted By OnlytheTip:
Originally Posted By tire_iron:
I did an install video for the Zhukov handguard. Zhukov install video cheers tire iron I really appreciate the install video, you really did a great job with the explanation. I wish you would have shown cutting off the retainer, but I can imagine how to do it. Maybe you have a few pearls of wisdom you could share about that. Sublimeon24s did a great job of explaining exactly how I did this too. The reason I didn't video that portion is I didn't want to get any metal dust on my camera. Thank you for the kind words, I am glad you enjoyed the video. cheers tire iron |
|
Originally Posted By Dragynn:
And de-value your rifles by about 100 bucks, as no other standard furniture will ever work again unless the rifle is repaired. What will be really hilarious is the look on owner's faces when they go to sell the rifle and get offered a lot less than the rifles currently go for, and start stuttering about how it's not worth less it's worth more because magpul is so awesome and all and JUST EVERYBODY loves the magpul handguards and what's wrong with you it's MAGPUL ZOMG! Used WASR missing it's handguard retainer = $400 bucks maybe, personally I wouldn't be a buyer unless it were closer to 300. Its not "permanent", you can always press off the FSB,GB,and put a new retainer on. Or do that to remove it in the first place. It just so happens that more basement gunsmithts have a dremel than a press. |
|
Originally Posted By hihobrian:
Its not "permanent", you can always press off the FSB,GB,and put a new retainer on. Or do that to remove it in the first place. It just so happens that more basement gunsmithts have a dremel than a press. Yeah and it will cost another 100 bucks to do that if someone doesn't have the tools themselves. Like I said, it devalues the gun, no ifs ands or buts. I don't have the tools to do that myself, so unless I wanted to keep the Zhukov handguard, any rifle is worth 100 less if i'm looking to buy. If not more for my time and trouble toting it to-and-fro. Some of you guys seem to think EVERYBODY will just love this handguard, and it does look cool and i'm sure it will continue to sell like gangbusters....UNTIL the next gen comes out and Magpul figures out a workaround (and so far they ALWAYS do), or someone else comes out with a better one that doesn't require the handguard retainer to be cut off. At that point your handguard will be worth zilch for re-sale, and the rifle itself will be worth 100 less if you can even find guys willing to fool with it or deal with gunsmith charges. If you plan on keeping it forever, good on ya, but that's not what this discussion is about so all the guys itching to post yet again about how they never sell guns, please consider it already said (as it has been over and over again ad nauseum). |
Proud member of AKM (Arfkom Krylon Maniacs).
|
Glad where I live everyone loves "tactical" looking rifles.........The Zhukov handguard would be a bonus if I go to sell mine.......for every purist out there who would not want to buy it, there will be 6 or 7 mid 20-40yr olds who will love it
Last time I listed my SLR-95 on my local gun trader website, with its "AR-15" appearance, as a feeler for $1400 I had quite a few looking to purchase the day it was listed.............all in which i refused because I decided to keep the rifle |
|
Originally Posted By Dragynn:
Yeah and it will cost another 100 bucks to do that if someone doesn't have the tools themselves. Like I said, it devalues the gun, no ifs ands or buts. I don't have the tools to do that myself, so unless I wanted to keep the Zhukov handguard, any rifle is worth 100 less if i'm looking to buy. If not more for my time and trouble toting it to-and-fro. Some of you guys seem to think EVERYBODY will just love this handguard, and it does look cool and i'm sure it will continue to sell like gangbusters....UNTIL the next gen comes out and Magpul figures out a workaround (and so far they ALWAYS do), or someone else comes out with a better one that doesn't require the handguard retainer to be cut off. At that point your handguard will be worth zilch for re-sale, and the rifle itself will be worth 100 less if you can even find guys willing to fool with it or deal with gunsmith charges. If you plan on keeping it forever, good on ya, but that's not what this discussion is about so all the guys itching to post yet again about how they never sell guns, please consider it already said (as it has been over and over again ad nauseum). Originally Posted By Dragynn:
Originally Posted By hihobrian:
Its not "permanent", you can always press off the FSB,GB,and put a new retainer on. Or do that to remove it in the first place. It just so happens that more basement gunsmithts have a dremel than a press. Yeah and it will cost another 100 bucks to do that if someone doesn't have the tools themselves. Like I said, it devalues the gun, no ifs ands or buts. I don't have the tools to do that myself, so unless I wanted to keep the Zhukov handguard, any rifle is worth 100 less if i'm looking to buy. If not more for my time and trouble toting it to-and-fro. Some of you guys seem to think EVERYBODY will just love this handguard, and it does look cool and i'm sure it will continue to sell like gangbusters....UNTIL the next gen comes out and Magpul figures out a workaround (and so far they ALWAYS do), or someone else comes out with a better one that doesn't require the handguard retainer to be cut off. At that point your handguard will be worth zilch for re-sale, and the rifle itself will be worth 100 less if you can even find guys willing to fool with it or deal with gunsmith charges. If you plan on keeping it forever, good on ya, but that's not what this discussion is about so all the guys itching to post yet again about how they never sell guns, please consider it already said (as it has been over and over again ad nauseum). Move along if you don't like it. You're sounding like a troll in here. |
|
Originally Posted By Dragynn:
Yeah and it will cost another 100 bucks to do that if someone doesn't have the tools themselves. Like I said, it devalues the gun, no ifs ands or buts. I don't have the tools to do that myself, so unless I wanted to keep the Zhukov handguard, any rifle is worth 100 less if i'm looking to buy. If not more for my time and trouble toting it to-and-fro. Some of you guys seem to think EVERYBODY will just love this handguard, and it does look cool and i'm sure it will continue to sell like gangbusters....UNTIL the next gen comes out and Magpul figures out a workaround (and so far they ALWAYS do), or someone else comes out with a better one that doesn't require the handguard retainer to be cut off. At that point your handguard will be worth zilch for re-sale, and the rifle itself will be worth 100 less if you can even find guys willing to fool with it or deal with gunsmith charges. If you plan on keeping it forever, good on ya, but that's not what this discussion is about so all the guys itching to post yet again about how they never sell guns, please consider it already said (as it has been over and over again ad nauseum). Originally Posted By Dragynn:
Originally Posted By hihobrian:
Its not "permanent", you can always press off the FSB,GB,and put a new retainer on. Or do that to remove it in the first place. It just so happens that more basement gunsmithts have a dremel than a press. Yeah and it will cost another 100 bucks to do that if someone doesn't have the tools themselves. Like I said, it devalues the gun, no ifs ands or buts. I don't have the tools to do that myself, so unless I wanted to keep the Zhukov handguard, any rifle is worth 100 less if i'm looking to buy. If not more for my time and trouble toting it to-and-fro. Some of you guys seem to think EVERYBODY will just love this handguard, and it does look cool and i'm sure it will continue to sell like gangbusters....UNTIL the next gen comes out and Magpul figures out a workaround (and so far they ALWAYS do), or someone else comes out with a better one that doesn't require the handguard retainer to be cut off. At that point your handguard will be worth zilch for re-sale, and the rifle itself will be worth 100 less if you can even find guys willing to fool with it or deal with gunsmith charges. If you plan on keeping it forever, good on ya, but that's not what this discussion is about so all the guys itching to post yet again about how they never sell guns, please consider it already said (as it has been over and over again ad nauseum). For every guy this is worth $100 less to, there will be another guy that can't wait to have this. No different than almost every other accessory out there. I will have this on a few AK's, not all though. Different strokes and all that. |
|
Originally Posted By seej333:
Move along if you don't like it. You're sounding like a troll in here. Originally Posted By seej333:
Originally Posted By Dragynn:
Originally Posted By hihobrian:
Its not "permanent", you can always press off the FSB,GB,and put a new retainer on. Or do that to remove it in the first place. It just so happens that more basement gunsmithts have a dremel than a press. Yeah and it will cost another 100 bucks to do that if someone doesn't have the tools themselves. Like I said, it devalues the gun, no ifs ands or buts. I don't have the tools to do that myself, so unless I wanted to keep the Zhukov handguard, any rifle is worth 100 less if i'm looking to buy. If not more for my time and trouble toting it to-and-fro. Some of you guys seem to think EVERYBODY will just love this handguard, and it does look cool and i'm sure it will continue to sell like gangbusters....UNTIL the next gen comes out and Magpul figures out a workaround (and so far they ALWAYS do), or someone else comes out with a better one that doesn't require the handguard retainer to be cut off. At that point your handguard will be worth zilch for re-sale, and the rifle itself will be worth 100 less if you can even find guys willing to fool with it or deal with gunsmith charges. If you plan on keeping it forever, good on ya, but that's not what this discussion is about so all the guys itching to post yet again about how they never sell guns, please consider it already said (as it has been over and over again ad nauseum). Move along if you don't like it. You're sounding like a troll in here. Actually, I strongly believe it's healthy if we allow everyone to express their opinions. Arfcom would be devoid of informations if everyone drinks kool-aids. Can we not please resort to accusing each other of trolling if we don't agree with their opinions? |
|
Actually, I strongly believe it's healthy if we allow everyone to express their opinions. Arfcom would be devoid of informations if everyone drinks kool-aids. Can we not please resort to accusing each other of trolling if we don't agree with their opinions? I'm all for that, it just doesn't need four posts repeating it 
Okay back on topic...yes they are making the grips in plum. Doesn't look like in the MOE plus at the moment though. |
|
Hey Magpul, any ETA on the OD green furniture? Need an AKM handguard and MOE stock for the SA-85.
FYI for all: top handguard on the AKM set needed minor fitting on both rifles I tried it on, hits the bottom piece and wouldn't let the gas tube all the way down to lock, not at all a biggie as I prefer oversize parts and hand fitting them, just took 30 seconds or so on flat surface with some 220 grit. Handguard retainer sling loop is a different matter, little too close there Magpul, makes it almost unuseable, just another couple millimeters would do, a standard AK sling works barely, but no go with an HK-type hook. Filing it for more clearance wouldn't look too bad I guess. |
Proud member of AKM (Arfkom Krylon Maniacs).
|
Originally Posted By Dragynn:[/span]
And de-value your rifles by about 100 bucks, as no other standard furniture will ever work again unless the rifle is repaired. What will be really hilarious is the look on owner's faces when they go to sell the rifle and get offered a lot less than the rifles currently go for, and start stuttering about how it's not worth less it's worth more because magpul is so awesome and all and JUST EVERYBODY loves the magpul handguards and what's wrong with you it's MAGPUL ZOMG! Used WASR missing it's handguard retainer = $400 bucks [span style='font-style: italic;']maybe[/span], personally I wouldn't be a buyer unless it were closer to 300. Meh, when I get around to buying some Magpul AK goodies, they'll be going on my two Saigas. Anything is an improvement over the craptastic stock Saiga forend. |
|
Originally Posted By Gone_Shootin:
Anything is an improvement over the craptastic stock Saiga forend. Ya know, I like it and the Vepr longer handguard too, and everybody complained about both, then Magpul comes out with an even longer one, and everybody goes gaga and starts hacking off the handguard retainers. Go figure.
I guess guys are as bad about being fashion freaks as women are. I have mixed feelings about the AKM handguard so far, admittedly it looks badass on the wife's WASR, but it's awfully big and bulky, folks with small hands might not like it, much heavier than a standard handguard too. Fit is nice and tight though and that's a plus, just need a little more clearance for the sling loop. I like the top portion, and it looks damn good with a standard lower in fact, the top is worth buying by itself, much sturdier than most, and slightly overlaps a standard bottom. |
Proud member of AKM (Arfkom Krylon Maniacs).
|
Originally Posted By Gone_Shootin:
Meh, when I get around to buying some Magpul AK goodies, they'll be going on my two Saigas. Anything is an improvement over the craptastic stock Saiga forend. Originally Posted By Gone_Shootin:
Originally Posted By Dragynn:[/span]
And de-value your rifles by about 100 bucks, as no other standard furniture will ever work again unless the rifle is repaired. What will be really hilarious is the look on owner's faces when they go to sell the rifle and get offered a lot less than the rifles currently go for, and start stuttering about how it's not worth less it's worth more because magpul is so awesome and all and JUST EVERYBODY loves the magpul handguards and what's wrong with you it's MAGPUL ZOMG! Used WASR missing it's handguard retainer = $400 bucks [span style='font-style: italic;']maybe[/span], personally I wouldn't be a buyer unless it were closer to 300. Meh, when I get around to buying some Magpul AK goodies, they'll be going on my two Saigas. Anything is an improvement over the craptastic stock Saiga forend. No handguard retainer to worry about on your Saiga anyways. |
|
Originally Posted By Dragynn:
Ya know, I like it and the Vepr longer handguard too, and everybody complained about both, then Magpul comes out with an even longer one, and everybody goes gaga and starts hacking off the handguard retainers. Go figure.
I guess guys are as bad about being fashion freaks as women are. I have mixed feelings about the AKM handguard so far, admittedly it looks badass on the wife's WASR, but it's awfully big and bulky, folks with small hands might not like it, much heavier than a standard handguard too. Fit is nice and tight though and that's a plus, just need a little more clearance for the sling loop. I like the top portion, and it looks damn good with a standard lower in fact, the top is worth buying by itself, much sturdier than most, and slightly overlaps a standard bottom. Originally Posted By Dragynn:
Originally Posted By Gone_Shootin:
Anything is an improvement over the craptastic stock Saiga forend. Ya know, I like it and the Vepr longer handguard too, and everybody complained about both, then Magpul comes out with an even longer one, and everybody goes gaga and starts hacking off the handguard retainers. Go figure.
I guess guys are as bad about being fashion freaks as women are. I have mixed feelings about the AKM handguard so far, admittedly it looks badass on the wife's WASR, but it's awfully big and bulky, folks with small hands might not like it, much heavier than a standard handguard too. Fit is nice and tight though and that's a plus, just need a little more clearance for the sling loop. I like the top portion, and it looks damn good with a standard lower in fact, the top is worth buying by itself, much sturdier than most, and slightly overlaps a standard bottom. Enough dude! You aren't contributing to this topic anymore. You voiced your opinion several times, now it's time to just stop. |
As much as my response will bother you, I don't care about grammar, punctuation, or spelling. I'm a budding, failing comedian, not an English major. Deal with it!
|
Originally Posted By seej333:
No handguard retainer to worry about on your Saiga anyways. Originally Posted By seej333:
Originally Posted By Gone_Shootin:
Originally Posted By Dragynn:[/span]
And de-value your rifles by about 100 bucks, as no other standard furniture will ever work again unless the rifle is repaired. What will be really hilarious is the look on owner's faces when they go to sell the rifle and get offered a lot less than the rifles currently go for, and start stuttering about how it's not worth less it's worth more because magpul is so awesome and all and JUST EVERYBODY loves the magpul handguards and what's wrong with you it's MAGPUL ZOMG! Used WASR missing it's handguard retainer = $400 bucks [span style='font-style: italic;']maybe[/span], personally I wouldn't be a buyer unless it were closer to 300. Meh, when I get around to buying some Magpul AK goodies, they'll be going on my two Saigas. Anything is an improvement over the craptastic stock Saiga forend. No handguard retainer to worry about on your Saiga anyways. Exactly. |
|
Originally Posted By Dragynn:
Ya know, I like it and the Vepr longer handguard too, and everybody complained about both, then Magpul comes out with an even longer one, and everybody goes gaga and starts hacking off the handguard retainers. Go figure.
I guess guys are as bad about being fashion freaks as women are. I have mixed feelings about the AKM handguard so far, admittedly it looks badass on the wife's WASR, but it's awfully big and bulky, folks with small hands might not like it, much heavier than a standard handguard too. Fit is nice and tight though and that's a plus, just need a little more clearance for the sling loop. I like the top portion, and it looks damn good with a standard lower in fact, the top is worth buying by itself, much sturdier than most, and slightly overlaps a standard bottom. Originally Posted By Dragynn:
Originally Posted By Gone_Shootin:
Anything is an improvement over the craptastic stock Saiga forend. Ya know, I like it and the Vepr longer handguard too, and everybody complained about both, then Magpul comes out with an even longer one, and everybody goes gaga and starts hacking off the handguard retainers. Go figure.
I guess guys are as bad about being fashion freaks as women are. I have mixed feelings about the AKM handguard so far, admittedly it looks badass on the wife's WASR, but it's awfully big and bulky, folks with small hands might not like it, much heavier than a standard handguard too. Fit is nice and tight though and that's a plus, just need a little more clearance for the sling loop. I like the top portion, and it looks damn good with a standard lower in fact, the top is worth buying by itself, much sturdier than most, and slightly overlaps a standard bottom. Hmm.....my Saigas don't have handguard retainers. Imagine that. Plus the Zhukov forend will make it easier to mount a light and foregrip or handstop, and it has a friggin aluminum chassis that doubles as a heat sink. And I never liked the stock Saiga forend. It looks nice, feels good in the hand, but has been known to have heat issues. |
|
Originally Posted By phasesouth:
<a href="http://s259.photobucket.com/user/phasesouth/media/20150520_113259_zpsrwfhshi7.jpg.html" target="_blank">http://i259.photobucket.com/albums/hh311/phasesouth/20150520_113259_zpsrwfhshi7.jpg</a> <a href="http://s259.photobucket.com/user/phasesouth/media/20150520_113238_zpsmsmegvt1.jpg.html" target="_blank">http://i259.photobucket.com/albums/hh311/phasesouth/20150520_113238_zpsmsmegvt1.jpg</a> ROMARM SAR1 That looks very good. I am waiting on the MOE AK stock in OD green. |
|
Originally Posted By OnlytheTip:
Enough dude! You aren't contributing to this topic anymore. You voiced your opinion several times, now it's time to just stop. Originally Posted By OnlytheTip:
Originally Posted By Dragynn:
Originally Posted By Gone_Shootin:
Anything is an improvement over the craptastic stock Saiga forend. Ya know, I like it and the Vepr longer handguard too, and everybody complained about both, then Magpul comes out with an even longer one, and everybody goes gaga and starts hacking off the handguard retainers. Go figure.
I guess guys are as bad about being fashion freaks as women are. I have mixed feelings about the AKM handguard so far, admittedly it looks badass on the wife's WASR, but it's awfully big and bulky, folks with small hands might not like it, much heavier than a standard handguard too. Fit is nice and tight though and that's a plus, just need a little more clearance for the sling loop. I like the top portion, and it looks damn good with a standard lower in fact, the top is worth buying by itself, much sturdier than most, and slightly overlaps a standard bottom. Enough dude! You aren't contributing to this topic anymore. You voiced your opinion several times, now it's time to just stop. I'm not aware of any limit on voicing your opinion on a public forum, nor of your authority to decide who gets to say what and how often. Feel free not to read my posts, this forum does come with an ignore feature which i'm about to use to good effect. 
|
Proud member of AKM (Arfkom Krylon Maniacs).
|
Originally Posted By bigcraig:
Pics. Bipod will not be normally on the gun, just for pics and sight in work. http://www.hunt101.com/data/500/medium/Zhukov_002.JPG http://www.hunt101.com/data/500/medium/Zhukov_003.JPG What railed top is that? |
|
Originally Posted By DOG556:
So I'm looking at The DDI Heavy barrel Milled receiver AK47 at Atlantic .... And are we sure that the magpul Furniture will NOT fit this gun??? Twin tang on the rear, so the magpul stock won't work. If DDI is using twin tangs then presumably the front of the receiver is also standard milled fare, i.e., it won't take AKM-patterned handguards. Unless and until magpul releases milled-compatible furniture you're out of luck. |
|
Originally Posted By Notyouratty:
Twin tang on the rear, so the magpul stock won't work. If DDI is using twin tangs then presumably the front of the receiver is also standard milled fare, i.e., it won't take AKM-patterned handguards. Unless and until magpul releases milled-compatible furniture you're out of luck. Originally Posted By Notyouratty:
Originally Posted By DOG556:
So I'm looking at The DDI Heavy barrel Milled receiver AK47 at Atlantic .... And are we sure that the magpul Furniture will NOT fit this gun??? Twin tang on the rear, so the magpul stock won't work. If DDI is using twin tangs then presumably the front of the receiver is also standard milled fare, i.e., it won't take AKM-patterned handguards. Unless and until magpul releases milled-compatible furniture you're out of luck. They did.......the zhukov handguard............it does not go into the receiver, it utilizes barrel clamps and requires cutting off the handguard retainer |
|
Just got my magpul stock, handguard and pistol grip on my Saiga installed now to mount my reddot on the MI 30 ak mount.
I like that Saiga in green but em wondering how you got the top part of the magpul hand guard to fit, mine is really tight and is still not seated right. I need to fine out how to post pics |
|
Originally Posted By AR-Builder-Upper:
What railed top is that? Originally Posted By AR-Builder-Upper:
Originally Posted By bigcraig:
Pics. Bipod will not be normally on the gun, just for pics and sight in work. http://www.hunt101.com/data/500/medium/Zhukov_002.JPG http://www.hunt101.com/data/500/medium/Zhukov_003.JPG What railed top is that? Texas Weapons Systems. |
Originally Posted By swingset:
Just head on down to your local "Shit Normal People Shouldn't Fuck Around With Supermart". Isle 3, next to the menstruating porcupine.
| For some reason my Zhukov-S stock is in the way of the bolt handle. I'm at an impasse on whether it can be corrected, or if I'll just have to live with it. Kind of sucks IMO. Can the wedge block be loosened enough to allow the stock to drop a little or does it have to be on tight? |
As much as my response will bother you, I don't care about grammar, punctuation, or spelling. I'm a budding, failing comedian, not an English major. Deal with it!
|
Originally Posted By phasesouth:
Did the Draco <a href="http://s259.photobucket.com/user/phasesouth/media/008_zpsurwyjicz.jpg.html" target="_blank">http://i259.photobucket.com/albums/hh311/phasesouth/008_zpsurwyjicz.jpg</a> Is this with an extended flash hider? Anymore shots? |
|
Originally Posted By phasesouth:
Yes....3.5" <a href="http://s259.photobucket.com/user/phasesouth/media/006_zps1dy7exgq.jpg.html" target="_blank">http://i259.photobucket.com/albums/hh311/phasesouth/006_zps1dy7exgq.jpg</a> Damn! That Zhukov looks like it was custom made for the Draco. Nice! |
As much as my response will bother you, I don't care about grammar, punctuation, or spelling. I'm a budding, failing comedian, not an English major. Deal with it!
|
Not into the Draco but that looks cool.
Ran into a small problem today while installing it on an RPK. As the barrel is heavier, I will been to dremel or mill out the metal retainer clips . Right now it looks like I am trying to put a 30mm scope in 1 inch rings. Minor work with the right tools and I believe there will be plenty of metal left for this to work. |
|
Here is my live fire review of the Zhukov, hope you enjoy it.
[youtube]https://www.youtube.com/watch?v=8FLwInJ81L0[/youtube] I don't know how to hot-link - I used the "youtube" icon on the reply page and this is what it gave me. cheers tire iron |
Magpul AK Furniture (Page 5 of 9)
AK Sponsor