AK Sponsor
Posted: 7/20/2016 10:32:18 AM EDT
|
Hi guys,
After opinions on whether removing the gas piston is in anyway harmful to the rifle when firing it? Why would I do such a thing? I'm working up some handloads in the gun and want to be able to inspect the cases immediately to check for any problems e.g. excessive pressure etc. The range I shoot at has long grass in front of the firing points and you have to wait until everyone has finished firing to be able to move in front of the firing points (obviously), to go hunting for brass. If the gas piston is removed I can just manually open the bolt and have the brass to hand, rather than it being in the next county 
I can only think I'm going to have a dirtier than normal barrel/heat shield, but would appreciate input from others. Thanks Mark |
|
yeah, I wouldn't go to that extreme of taking off the gas piston
if you just want to check the casing without hunting for it in tall grass, a simpler and much easier solution is to fabricate a brass catcher and attach it to the side of the gun where the ejecting port is. it doesn't have to look pretty or well made, some zip ties and plastic bag or cloth bag is all you need to catch one spent casing. firing one round won't heat the rifle where it would cause the plastic to melt then when you determine if the case is good, it's just a matter of cutting the ties off and now you can shoot the rifle normally anyway, that is what I would do |
| Thats for the opinions guys. Hadn't really thought about a hard extraction. British gun ranges don't take to kindly to you waving the gun in the air/pointing it above horizontal so that would be a problem. Looks like i'll need to jerry rig something to catch the brass/stop it going into orbit! |
AK Sponsor