Originally Posted By fivepointoh:
The Mrs. And I took some new boom sticks out for their maiden voyage. The PSA AK102 and 11.5" AR were both fed a healthy dose of Igman 55 GR. While the full size AP5 ran flawlessly, think I need to mod the brace on the K variant and throw some HK parts at it.

Back to the AK102. Irons were a tad low at 25 but nothing too drastic. Threw a Romeo 5 on it and got it dialed. Didn't take many pics as we were on a time crunch. Tan 240 rounds or so through it with zero malfunctions. However, the screw on the top rail/top cover loosened as been reported by others, and my lower handguard is now loose where it butts up to the receiver/trunion. I removed all screws and loctighted them when I got home but still have a little twisting wiggle in the rear of the lower handguard. Top rail/gas tube stayed secure the entire time. All 240 rounds were done in about 20 minutes. All mags used were AC Unity windowed 30 rounders.

seems accurate enough for what I plan on using it for and now that I know it functions fine, I'm going to go ahead and SBR it as I hate the triangle brace. Can't imagine how bad it is on a x39 pistol.

again sorry for lack of pics, but I'm just glad she is running good.

https://www.ar15.com/media/mediaFiles/90543/837A30A3-338A-4558-901D-87158BC6F6AB_jpe-2667905.JPGhttps://www.ar15.com/media/mediaFiles/90543/639BE8D0-06C2-49EE-95D1-F60E31DA4C7D_jpe-2667906.JPGhttps://www.ar15.com/media/mediaFiles/90543/C8BAAB81-CD90-4B74-B156-9C65BA0CAC58_jpe-2667907.JPGhttps://www.ar15.com/media/mediaFiles/90543/5EF03473-74CE-4D2D-9689-03B14714EA1D_jpe-2667908.JPG

Originally Posted By fivepointoh:
Didn't look like any unusual wear to me. When I take it back apart to fix that piece with the set screw and I'll snap some pics of the bolt, carrier, and trunion plus inside receiver.

Originally Posted By AZ5326X2:
Picked up my base model 102 on Tuesday and had it out on the range Wednesday.  I put over 200 rounds through it with one failure to fully go into battery.  The recoil spring seemed really weak (action was cycling fairly slowly) and was at least two inches shorter than the WBP recoil spring that I replaced it with.  Already looking forward to shooting this thing a lot more.

Originally Posted By fivepointoh:
The Mrs. And I took some new boom sticks out for their maiden voyage. The PSA AK102 and 11.5" AR were both fed a healthy dose of Igman 55 GR. While the full size AP5 ran flawlessly, think I need to mod the brace on the K variant and throw some HK parts at it.

Back to the AK102. Irons were a tad low at 25 but nothing too drastic. Threw a Romeo 5 on it and got it dialed. Didn't take many pics as we were on a time crunch. Tan 240 rounds or so through it with zero malfunctions. However, the screw on the top rail/top cover loosened as been reported by others, and my lower handguard is now loose where it butts up to the receiver/trunion. I removed all screws and loctighted them when I got home but still have a little twisting wiggle in the rear of the lower handguard. Top rail/gas tube stayed secure the entire time. All 240 rounds were done in about 20 minutes. All mags used were AC Unity windowed 30 rounders.

seems accurate enough for what I plan on using it for and now that I know it functions fine, I'm going to go ahead and SBR it as I hate the triangle brace. Can't imagine how bad it is on a x39 pistol.

again sorry for lack of pics, but I'm just glad she is running good.

https://www.ar15.com/media/mediaFiles/90543/837A30A3-338A-4558-901D-87158BC6F6AB_jpe-2667905.JPGhttps://www.ar15.com/media/mediaFiles/90543/639BE8D0-06C2-49EE-95D1-F60E31DA4C7D_jpe-2667906.JPGhttps://www.ar15.com/media/mediaFiles/90543/C8BAAB81-CD90-4B74-B156-9C65BA0CAC58_jpe-2667907.JPGhttps://www.ar15.com/media/mediaFiles/90543/5EF03473-74CE-4D2D-9689-03B14714EA1D_jpe-2667908.JPG

Originally Posted By Melvin_Johnson:





Do you have updates for us?  Inquiring minds want to know!