AK Sponsor
*****New AK Picture Thread***** (Page 23 of 26)
|
One of the problems with a re-finished gun is that all the accessories need to match. Here is my ultimak mount on my AK done up in 2-tone KG gunkote to match the rest of the gun. See the before pics on the refinishing forum  
|
|
i dont have as many as some of you guys and some of these have been seen around the forum before but here they are, my AK's for your comparison/inspection/scrutiny.. Polytech AKS double UF  Bulgarian SLR95 (1)  Bulgarian SLR95 (2)  Bulgarian SLR95 (3)  Bulgarian SSR85C2  Bulgarian AK74 side folder (built by In-Range)  Israeli Galil, SER II (built by In-Range)  Yugoslavian M70AB2 (1) (built by In-Range)  Yugoslavian M72 RPK (built by In-Range)  Polish AKM (built by Shootshack) Yugoslavian M70AB2 (2)  |
'You get further with a gun and a kind word, than with a kind word alone'
|
Lancaster Polish UF on matched 1983 Radom Kit...
http://i477.photobucket.com/albums/rr133/rainierhooker/AKMS.jpg |
1977 Izzy Matching # AKMS
1973 Tula with Zrecto furniture 
1970 Izzy with Zrecto furniture 
1997 Yugo M90A 
1983 Yugo M70AB2 
Yugo M70 Milled 
Bulgy AK74 
Bulgy AK74s 
1970 Romy MD63 
Hungarian AMMS 
Polytech AK47S Triple Underfolder 
Norinco 86S 
Norinco 84S2 clone 
Type 56 Clone 
Updated SA93 with replacement gas block, FSB, and cleaning rod. Still need to thread the muzzle and install the lower tang. 
Yugo M70B1 
1963 Romy 
1981 Romy Pistol 
1980 Romy Non-G 
1983 Polish PMKM 
1973 Polish PMKMS 
Maadi MISR, I didn't build it, but it's nice. Steyr Maadi 30 round mag. 
Bulgy AK74S 
Polish Tantal 
1981 Romy G 
1971 Romy RPK 
Yugo M72 RPK 
Maadi RPM Curly maple furniture. Yes, I had a bling phase. 100 rounder 
 ]
Norinco NHM91 with PKM style stock 
Bulgy RPK74 
Romy SAR2 
Romy SAR3 
Romy SAR3 #2 
1978 Romy G First build 
Hungarian AMD63 #1 
Hungarian AMD63 #5 
Hungarian AMD65 
1979 E.German 
Saiga 12 conversion 
Saiga 20 
Yugo M92 
Just finished my Bulgy Krinkov 
SA85M with AMD65 short gas tube. I couldn't find my kit and broke down and bought the rifle. I still need to find the correct stock and grip...it bugs me. 
SA85 build. Thanks to notime for alerting me as to the kit's availability. 
I just purchased a VZ58 and I love it! 
Still waiting to be finished 
|
|
Great stuff!
Here's one I had finished not too long ago with some bring-back furniture (I figure I'll let the wear on the metal come naturally over time to match the furniture): (the original one from Iraq) 
(the finished clone I wanted based off the original one) 
|
Henderson "Afghan Edition" G Model Romy, now sporting a K-var shiney plum grip, some Soviet brown/orange laminated handguards, sling and bakelite mags.
|
Originally Posted By SevenMaryThree:
You get a formal written warning put in your jacket for making fun of 'tards. Trust me.
You get a formal written warning put in your jacket for making fun of 'tards. Trust me.
You can't fight in here, this is the War Room!
Joined:
Oct 2008
Posts:
421
EE: 100% (4)
WA, USA
|
My Romanian SAR-1 in its current configuration and the original wood furniture that I refinished.
http://img5.imageshack.us/img5/6446/1000364aby.jpg http://img44.imageshack.us/img44/2530/1000365c.jpg |
|
Just a WASR, but a good shooter. Only took six rounds to zero it; 3 initial, 1.5 turns of elevation, and three more rounds to confirm. I see a paint job in its future. http://i149.photobucket.com/albums/s78/jenedla/Guns/DSC03020.jpg |
|
href=http://i72.photobucket.com/albums/i164/itypetoo/parts/th_MVI_1814.jpg" />
http://i72.photobucket.com/albums/i164/itypetoo/parts/AK47AdjGasBlock.jpg http://i72.photobucket.com/albums/i164/itypetoo/parts/AK47AdjGasBlock2-2.jpg DEZ Arms, Inc. has an AK-Type Adjustable Gas Block for AK47 and variants, Romak 3 – PSL, SSG-97 & SSG2000 sniper rifles, suppressed or non-suppressed, commonly used for military, law enforcement and civilian applications shot in semi-auto and full-auto modes. Adjustments can be dialed in –– off position for single shots to a full gas position for any load available. The system reduces recoil, damage to receiver rails and rivets in the rear trunion and rails, reduces bolt carier racking and carbon buildup on the piston head and shaft. Bullelt velocity is enhanced by using less gas to cycle the system. The block can easily be reamed out to fit any available AK barrel by mounting the adjustable gas block to the barrel with four set screws, adjust the gas flow by turning the regulator –– in to decrease, out to increase the gas. A screw driver, coin, or backside of a bullet can be used to precisely adjust the regulator. Simple installation: Remove the front sites from the barrel by removing pins. Next remove pins from the old gas block. Then remove the existing block from the barrel. Lastly, install the adjustable gas block on barrel and align the gas port hole with the gas block port. Apply Lock-Tite to the set screw tips and tighten securely allowing time to dry. Material: 4140 chrome moly steel Overall Dimensions: 2.145” x 2” x .945” Fits: AK47 & Variant Semi-Auto or Select Fire Rifles .592 diameter barrels Romak 3 – PSL Semi-Auto or Select Fire Rifles .610 diameter barrels SSG-97 & SSG2000 Sniper Rifles .610 diameter barrel www.dezarms.com –– Products |
|
Originally Posted By Villafuego:
Polytech AKS http://img.photobucket.com/albums/v239/villafuego/aks1.jpg http://img.photobucket.com/albums/v239/villafuego/aks2.jpg http://img.photobucket.com/albums/v239/villafuego/aks3.jpg and a PSL I just picked up from another board member.....does 1.5" with Czech silvertip light ball.... http://img.photobucket.com/albums/v239/villafuego/psl1.jpg Nice AKs! Is that a transit box that you made or bought? If so, got any pics of the insides? I'd like to make one or pick one up... Thanks! |
|
My new Hungarian FAG SA-85M
http://i765.photobucket.com/albums/xx295/Bull543/rsz_001.jpg |
|
Originally Posted By Bull543:
My new Hungarian FAG SA-85M http://i765.photobucket.com/albums/xx295/Bull543/rsz_001.jpg Hungarian FEG 
|
|
Originally Posted By Rayman1:
Originally Posted By Bull543:
My new Hungarian FAG SA-85M http://i765.photobucket.com/albums/xx295/Bull543/rsz_001.jpg Hungarian FEG 
|
Originally Posted By SevenMaryThree:
You get a formal written warning put in your jacket for making fun of 'tards. Trust me.
You get a formal written warning put in your jacket for making fun of 'tards. Trust me.
|
My new AK 103 , looks exactly like a 74 but chambered 7.62*39. Any one ever came across this model ?
http://img.photobucket.com/albums/v188/gasmlt/ak103.jpg |
|
Originally Posted By Gasmlt: My new AK 103 , looks exactly like a 74 but chambered 7.62*39. Any one ever came across this model ? http://img.photobucket.com/albums/v188/gasmlt/ak103.jpg yuppers!  fixed stock version before I added the folder.  Saiga model SGL-10 for the one above. SGL-21 for one converted from the factory. I like your wood grips! |
AMERICA RISING!
|
Originally Posted By 413x4nd3r:
http://i53.photobucket.com/albums/g69/alexeinspruch/7c9ddf47.jpg http://i53.photobucket.com/albums/g69/alexeinspruch/70843104.jpg What are you doing for front sights on that? And are you refinishing the barrel? |
|
A new build GP WASR 10/63...
Started like this: blond wood handguards, no cleaing rod, and Tapco side folder... http://i29.photobucket.com/albums/c291/TK4063/Weapons/Personal%20Firearms/100_2024.jpg http://i29.photobucket.com/albums/c291/TK4063/Weapons/Personal%20Firearms/100_2025.jpg Transitioned to this: refinished handguard, added cleaning rod, installed (modified) Ace side folder... http://i29.photobucket.com/albums/c291/TK4063/Weapons/Personal%20Firearms/100_2214.jpg http://i29.photobucket.com/albums/c291/TK4063/Weapons/Personal%20Firearms/100_2209.jpg Evolved to this: black poly handguards from K-Var.... the thing has shot/functioned SWEETLY from day one!! http://i29.photobucket.com/albums/c291/TK4063/Weapons/Personal%20Firearms/100_2253.jpg http://i29.photobucket.com/albums/c291/TK4063/Weapons/Personal%20Firearms/100_2255.jpg |
*****New AK Picture Thread***** (Page 23 of 26)
AK Sponsor