BLEM PSA GEN3 PA10 18" MID-LENGTH .308 WIN 1:10 STAINLESS STEEL 15" LIGHTWEIGHT M-LOK UPPER - WITH BCG & CH

PRODUCT DETAILS
DETAILS
Barrel Length: 18"

Gas System: Mid-Length

Barrel Profile: A2 Style

Barrel Steel: 416R Stainless Steel

Barrel Finish: Stainless Steel

Chrome Lining: None

Muzzle Thread: 5/8-24

Chamber: 308 WIN

Twist Rate: 1:10

Barrel Extension: M4-style

Diameter at Gas Block: .750

Gas Block Type: Low-profile 3 position click switch adjustable gas block

Gas Tube: Black Nitride Gas Tube

Muzzle Device: A2 Style Flash Hider

Receiver Material: Forged 7075 T6

Receiver Type: PA10

Handguard Type: PSA 15" M-Lok Free Float Rail with Anti-slip and anti-rotation features

Bolt Carrier Group Included: Yes, Toolcraft PA10 BCG with extra power extractor spring

Charging Handle Included: Yes, 7075 T6 CH Included

** These uppers will have cosmetic blemishes that do not affect function. This may include, but is not limited to, forging marks under the finish, scratches, slight variation in the finish color coat.

FEATURES
You asked, and we listened! Palmetto State Armory is proud to release our Gen3 PA10 Barreled Upper Receiver! The Gen3 model has been enhanced to improve the reliability and longevity of our PA10 platform. This new platform includes several features that have never before been included on our PA-10 platform. We hope you enjoy these new features and look forward to your feedback!

With enhanced durability and improved function, the new and improved PSA PA10 Gen3 is here. The Gen3 model offers a black nitride stainless gas tube to better resist high heat and corrosion while maintaining a glossy black finish. All Gen3 PA10 models come with a dimpled barrel for ease of gas block replacement if you choose to do so. We have also included a newly designed click switch 5 position adjustable gas block so you can specifically tune it to your load.

Gen 3 Benefits at a Glance:

Dimpled 416R Stainless Steel Barrel
3 Position Adjustable Click Switch Gas Block
Extra Power Extractor Springs
7075 T6 Charging Handle Included in all uppers
Black Nitride Gas Tube
Barrel Nuts properly torqued to military specifications
Anti-slip and anti-rotation handguards

Barrel: The 18" dimpled, 416R Stainless Steel, 308 WIN 1/10 twist, Mid-length gas system upper is paired with a Palmetto State Armory 15" M-Lok free-float rail, low profile adjustable click detent 3 position gas block, and an A2-style muzzle device. The gas system is enhanced with a nitrided gas tube in order to resist high heat and corrosion better.

Upper: Precision machined from forged 7075-T6 aluminum, then Black anodize hard coated to MIL-8625 Type 3 class 2, with enhanced dual retention anti-slip and anti-rotating handguards.

Bolt Carrier Group: Tool craft 9310 steel bolt assembly with extra strength extractor springs that is nitride for increased durability. 8620 carrier, nitride treated, with a nitride-treated gas key properly staked with grade 8 fasteners. A 7075 T6 aluminum charging handle is also included.

The Gen3 PA10 receivers are functionally compatible with the Gen1 and Gen2 upper receivers, however, we recommend matching Gen3 lowers to Gen3 uppers for the best appearance and performance. External cosmetic differences exist when mixing Gen1 with Gen2 and Gen3 upper and lower receivers that some may not find appealing.

The AR10 platform does not enjoy a common design between manufacturers, like the AR15. As a result, there can and will be subtle differences in the parts kits of various manufacturers. Some parts, like the fire control group, are shared with the AR15 platform to preserve the options for upgrading. For best results, we recommend only using PSA PA10 parts with our uppers and lower receivers. We do not recommend using other manufacturers' parts in our products.

** These uppers will have cosmetic blemishes that do not affect function. This may include but is not limited to, forging marks under the finish, scratches, and slight variations in the finish color coat.