User Panel
User Panel
User Panel
|
Posted: 3/30/2015 3:30:23 PM EDT
[#1]
Primary arms advanced micro dot works well on the evo.
|
|
|
|
Posted: 3/30/2015 3:32:30 PM EDT
[#2]
Meopta makes some smaller red dots for under that.
They are also listed as a CZ accessory. |
|
|
|
Posted: 3/30/2015 3:39:57 PM EDT
[#3]
Find yourself a Leupold delta point. soon will have the pro out and it can be had for under 300. If u can find it. Perfect optic for the evo if you want a low mount. I have one on my glock I will mount on the evo and take a pic for you. I prefer a big sight so my mepro is what I'm running. Co witness doesn't matter to me
|
|
|
|
Posted: 3/30/2015 4:14:22 PM EDT
[#4]
I retract my last post. I mounted the aimpoint, deltapoint, and mepro. None of them will co witness. The aim point ML3 and the deltapoint are at the same height.
 " />
 " />
 " />
 " />
 " />
 " />
|
|
|
|
Posted: 3/30/2015 4:55:33 PM EDT
[#5]
Is there no lower mount for the deltapoint? That thing looks ridiculous since it looks like it triples the height of the sight.
|
|
|
|
Posted: 3/30/2015 5:21:19 PM EDT
[#6]
Quote HistoryQuoted:
I retract my last post. I mounted the aimpoint, deltapoint, and mepro. None of them will co witness. The aim point ML3 and the deltapoint are at the same height. http://<a href=http://i205.photobucket.com/albums/bb240/jmurray192/DSC_0610_zpsfipwx34k.jpg</a>" /> http://<a href=http://i205.photobucket.com/albums/bb240/jmurray192/DSC_0620_zpsu8qkgfiv.jpg</a>" /> http://<a href=http://i205.photobucket.com/albums/bb240/jmurray192/DSC_0615_zpskuynlezw.jpg</a>" /> http://<a href=http://i205.photobucket.com/albums/bb240/jmurray192/DSC_0618_zpscv1ynrjx.jpg</a>" /> http://<a href=http://i205.photobucket.com/albums/bb240/jmurray192/DSC_0619_zpsgcclul0j.jpg</a>" /> http://<a href=http://i205.photobucket.com/albums/bb240/jmurray192/DSC_0621_zpsbln7t7ym.jpg</a>" /> Thanks for posting those! It saved me some time and money. |
|
|
|
Posted: 3/30/2015 5:27:19 PM EDT
[#7]
Used Aimpoint H1
|
|
|
|
Posted: 3/30/2015 5:48:40 PM EDT
[#8]
I went with a Meprolight 21
|
|
|
|
Posted: 3/30/2015 6:26:00 PM EDT
[#9]
Im using a vortex 1x spitfire since red dots blow for my astigmatism. It sits up too high even with the "low" base on it.
|
|
|
|
Posted: 3/30/2015 10:56:45 PM EDT
[#10]
PA micro should work fine.
Seems like the best option for your price and cowitness |
|
|
|
Posted: 3/30/2015 11:51:15 PM EDT
[#11]
Bushnell TRS 25 is an absolute cowitness on my Evo pistol. Really like it and it's very affordable.
|
|
|
|
Posted: 4/1/2015 6:03:23 AM EDT
[#12]
Rmr or fastfire type
|
|
|
|
Posted: 4/1/2015 7:16:01 AM EDT
[#13]
Quote HistoryQuoted:
PA micro should work fine. Seems like the best option for your price and cowitness can anyone conform co? |
|
|
|
Posted: 4/1/2015 8:49:59 AM EDT
[#14]
Quote HistoryQuoted:
can anyone conform co? Quote HistoryQuoted:
Quoted:
PA micro should work fine. Seems like the best option for your price and cowitness can anyone conform co? I can confirm that yes the PA microdot will co-witness. |
|
|
|
Posted: 4/1/2015 10:03:41 AM EDT
[#15]
PA is good stuff...even though made in china
|
|
|
|
Posted: 4/1/2015 10:09:14 AM EDT
[#16]
Don't really care about co-witness. In the unlikely event the optic is damaged it has QD mounts.
|
|
|
|
Posted: 4/1/2015 3:09:38 PM EDT
[#17]
I'm running a Vortex SPARC 2 now but really liked my good old TA44-5
ETA: the SPAC comes with multiple mounts/risers so you can find the best setup for you  
|
|
|
|
Posted: 4/3/2015 1:44:56 AM EDT
[#18]
The Primary Arms micro that has been talked about, is it low enough for cowitness?
Still on the fence on the CZ Evo, I want to SBR it, just not seeing much from CZ yet. |
|
|
|
Posted: 4/3/2015 8:26:57 AM EDT
[#19]
Quote HistoryQuoted:
The Primary Arms micro that has been talked about, is it low enough for cowitness? Still on the fence on the CZ Evo, I want to SBR it, just not seeing much from CZ yet. Quote HistoryQuoted:
The Primary Arms micro that has been talked about, is it low enough for cowitness? Still on the fence on the CZ Evo, I want to SBR it, just not seeing much from CZ yet. Quoted:
I can confirm that yes the PA microdot will co-witness. 4 posts up buddy |
|
|
|
Posted: 4/3/2015 4:19:02 PM EDT
[#20]
Quote HistoryQuoted:
4 posts up buddy Quote HistoryQuoted:
Quoted:
The Primary Arms micro that has been talked about, is it low enough for cowitness? Still on the fence on the CZ Evo, I want to SBR it, just not seeing much from CZ yet. Quoted:
I can confirm that yes the PA microdot will co-witness. 4 posts up buddy lulz sorry thanks |
|
|
|
Posted: 4/3/2015 6:00:38 PM EDT
[#21]
PA microdot on sale here...
http://www.schuylerarmsco.com/product.primary-arms-micro-dot-with-removable-base-with-free-riser-993 |
|
|
|
Posted: 4/3/2015 10:02:40 PM EDT
[#22]
I'll probably be adding a Holosun HS403G in a low QD T1 mount.
|
|
|
|
Posted: 4/10/2015 12:25:46 AM EDT
[#23]
Burris Fastfire III will co-witness, will try to get pics up tomorrow...
|
|
|
|
Posted: 4/10/2015 11:48:21 AM EDT
[#24]
I have given up on the factory cz sights I put on some magpul flip ups. I bit the bullet and picked up the Aimpoint h1 with a larue 751 mount which looked good on the scorpion, but then I made the mistake of throwing the h1 on my Ar and now I don't want to take it off !! So I took the Aimpoint pro removed the riser and placed it on my scorpion. It's large but functional
|
|
|
|
Posted: 4/10/2015 12:04:13 PM EDT
[#25]
Quote HistoryQuoted:
I have given up on the factory cz sights I put on some magpul flip ups. I bit the bullet and picked up the Aimpoint h1 with a larue 751 mount which looked good on the scorpion, but then I made the mistake of throwing the h1 on my Ar and now I don't want to take it off !! So I took the Aimpoint pro removed the riser and placed it on my scorpion. It's large but functional Just FYI for anyone wanting to use a LaRue mount, they will not work properly on split rail picitinny. (ie: CZ Scorpian, IWI Tavor etc). The Larue requires a solid rail to clamp properly. |
|
|
|
Posted: 4/10/2015 12:07:12 PM EDT
[#26]
Quote HistoryQuoted:
Just FYI for anyone wanting to use a LaRue mount, they will not work properly on split rail picitinny. (ie: CZ Scorpian, IWI Tavor etc). The Larue requires a solid rail to clamp properly. Quote HistoryQuoted:
Quoted:
I have given up on the factory cz sights I put on some magpul flip ups. I bit the bullet and picked up the Aimpoint h1 with a larue 751 mount which looked good on the scorpion, but then I made the mistake of throwing the h1 on my Ar and now I don't want to take it off !! So I took the Aimpoint pro removed the riser and placed it on my scorpion. It's large but functional Just FYI for anyone wanting to use a LaRue mount, they will not work properly on split rail picitinny. (ie: CZ Scorpian, IWI Tavor etc). The Larue requires a solid rail to clamp properly. Hmm I wonder why that is? Is that just the QD or the VFZ mounts too? |
|
|
|
Posted: 4/10/2015 12:44:54 PM EDT
[#27]
Quote HistoryQuoted:
Hmm I wonder why that is? Is that just the QD or the VFZ mounts too? Quote HistoryQuoted:
Quoted:
Quoted:
I have given up on the factory cz sights I put on some magpul flip ups. I bit the bullet and picked up the Aimpoint h1 with a larue 751 mount which looked good on the scorpion, but then I made the mistake of throwing the h1 on my Ar and now I don't want to take it off !! So I took the Aimpoint pro removed the riser and placed it on my scorpion. It's large but functional Just FYI for anyone wanting to use a LaRue mount, they will not work properly on split rail picitinny. (ie: CZ Scorpian, IWI Tavor etc). The Larue requires a solid rail to clamp properly. Hmm I wonder why that is? Is that just the QD or the VFZ mounts too? Pretty sure it's all mounts. Has to do with the way the bottom of the mount is designed. I requires a solid "bar" all the way across the picitinny. I ran into this issue with my Tavor and contacted LaRue and they confirmed it won't work properly on split rail picitinny.. In the pic you can see there are a couple of tabs on the bottom that need support all the way across. 
|
|
|
|
Posted: 4/10/2015 2:00:56 PM EDT
[#28]
Ok I see the issue now. So I would need a mount that has a full cross bar going across to get the proper support and not risk damage to the mount and rail.
|
|
|
|
Posted: 4/10/2015 7:15:51 PM EDT
[#29]
Used to think Larue mounts were the best.
Now... not so much. I heard they screwed up rails on the Benelli forums for the Benelli M4 too. Anyone try an Aimpoint T2 on one of these yet? 
|
|
|
|
Posted: 4/10/2015 7:57:40 PM EDT
[#30]
Quote HistoryQuoted:
Used to think Larue mounts were the best. Now... not so much. I heard they screwed up rails on the Benelli forums for the Benelli M4 too. Anyone try an Aimpoint T2 on one of these yet? In their defense, the mounts fit everything up until a few people started using these (non-spec) split rails (IWI Tavor mainly). It won't damage anything, just won't secure properly if there is a gap in the middle of the rail. |
|
|
|
Posted: 4/11/2015 1:18:10 AM EDT
[#31]
PA AMD
|
|
|
|
Posted: 4/12/2015 11:24:22 AM EDT
[#32]
I have a T1 on mine, works perfectly with the irons.
|
|
|
|
Posted: 4/15/2015 10:40:46 AM EDT
[#33]
I'm trying to decide between the meopta or the rmr with the rm33 mount
|
|
|
|
Posted: 4/15/2015 11:08:43 AM EDT
[#34]
Quote HistoryQuoted:
I'm trying to decide between the meopta or the rmr with the rm33 mount I'm leaning towards the Meopta but can't seem to find one in stock any where right now? Was also thinking about the Vortex Razor but not real keen on the button locations for brightness. Kind of hard to reach. |
|
|
|
Posted: 4/15/2015 11:53:40 AM EDT
[#35]
Quote HistoryQuoted:
I'm leaning towards the Meopta but can't seem to find one in stock any where right now? Was also thinking about the Vortex Razor but not real keen on the button locations for brightness. Kind of hard to reach. Quote HistoryQuoted:
Quoted:
I'm trying to decide between the meopta or the rmr with the rm33 mount I'm leaning towards the Meopta but can't seem to find one in stock any where right now? Was also thinking about the Vortex Razor but not real keen on the button locations for brightness. Kind of hard to reach. My concern about the meopta is that it looks too tall |
|
|
|
Posted: 4/15/2015 12:04:07 PM EDT
[#36]
Quote HistoryQuoted:
My concern about the meopta is that it looks too tall Quote HistoryQuoted:
Quoted:
Quoted:
I'm trying to decide between the meopta or the rmr with the rm33 mount I'm leaning towards the Meopta but can't seem to find one in stock any where right now? Was also thinking about the Vortex Razor but not real keen on the button locations for brightness. Kind of hard to reach. My concern about the meopta is that it looks too tall From what I can tell it comes with a couple of different sized spacers so you can adjust the height if you need to or take them out to go lower. |
|
|
|
Posted: 4/15/2015 12:12:56 PM EDT
[#37]
Quote HistoryQuoted:
From what I can tell it comes with a couple of different sized spacers so you can adjust the height if you need to or take them out to go lower. Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
I'm trying to decide between the meopta or the rmr with the rm33 mount I'm leaning towards the Meopta but can't seem to find one in stock any where right now? Was also thinking about the Vortex Razor but not real keen on the button locations for brightness. Kind of hard to reach. My concern about the meopta is that it looks too tall From what I can tell it comes with a couple of different sized spacers so you can adjust the height if you need to or take them out to go lower. What do you think about the rmr on there with rm33 mount? |
|
|
|
Posted: 4/24/2015 4:03:25 PM EDT
[#38]
I have read that the Bushnell Trophy TRS-25 Red Dot Sight Riflescope, 1 x 25mm will co witness. It is a cheaper sight- only around $90
|
|
|
|
Posted: 4/24/2015 4:10:54 PM EDT
[#39]
Quote HistoryVery nice. What mount is that? |
|
|
|
Posted: 4/24/2015 4:33:30 PM EDT
[#40]
I went back and forth on it. Originally was going to do a Primary Arms or a Vortex Sparc II. Then I grabbed a good deal on a T2 for about $660. I wanted to go with something really tiny and still bombproof.
|
|
|
|
Posted: 4/24/2015 4:42:41 PM EDT
[#41]
Quote HistoryQuoted:
I went back and forth on it. Originally was going to do a Primary Arms or a Vortex Sparc II. Then I grabbed a good deal on a T2 for about $660. I wanted to go with something really tiny and still bombproof. IM source? |
|
|
|
Posted: 4/24/2015 7:24:25 PM EDT
[#42]
Quote HistoryQuoted:
I went back and forth on it. Originally was going to do a Primary Arms or a Vortex Sparc II. Then I grabbed a good deal on a T2 for about $660. I wanted to go with something really tiny and still bombproof. I went with sparc 2 cause for 180 shipped with lifetime warranty and good reviews ypu can't beat it |
|
|
|
Posted: 4/24/2015 11:41:47 PM EDT
[#43]
Quote HistoryQuoted:
I have read that the Bushnell Trophy TRS-25 Red Dot Sight Riflescope, 1 x 25mm will co witness. It is a cheaper sight- only around $90 It does. PSA had a sale on them recently, for $49. I just sighted it in yesterday. Now I just need some 30 rounders, my stamp, and the factory stock. Posted Via AR15.Com Mobile |
|
|
|
Posted: 4/25/2015 5:39:41 PM EDT
[#44]
I'm still waiting on my Meopta. Will post a review on it when I get it. The people I ordered from completely screwed up the order but I should have it next week.
|
|
|
|
Posted: 4/30/2015 10:12:48 PM EDT
[#45]
Quote HistoryQuoted:
The Primary Arms micro that has been talked about, is it low enough for cowitness? Still on the fence on the CZ Evo, I want to SBR it, just not seeing much from CZ yet. Fyi cz is coming out with the original side folding stock the same as the 3a1 and the compliance parts as well sometime this summer... I don't know when but it is what I heard from the local gun shop here in eugene. So hopefully sometime soon because I wish to do the same I'm just waiting for the original part to come out... it will look the best on the gun I think the brace looks funny as well as any others I have seen. |
|
|
|
Posted: 4/30/2015 10:52:33 PM EDT
[#46]
Quote HistoryQuoted:
The Primary Arms micro that has been talked about, is it low enough for cowitness? Still on the fence on the CZ Evo, I want to SBR it, just not seeing much from CZ yet. Fyi cz is coming out with the original side folding stock the same as the 3a1 and the compliance parts as well sometime this summer... I don't know when but it is what I heard from the local gun shop here in eugene. So hopefully sometime soon because I wish to do the same I'm just waiting for the original part to come out... it will look the best on the gun I think the brace looks funny as well as any others I have seen. |
|
|
|
Posted: 5/12/2015 11:34:24 AM EDT
[#47]
Quote HistoryQuoted:
I'm leaning towards the Meopta but can't seem to find one in stock any where right now? Was also thinking about the Vortex Razor but not real keen on the button locations for brightness. Kind of hard to reach. Quote HistoryQuoted:
Quoted:
I'm trying to decide between the meopta or the rmr with the rm33 mount I'm leaning towards the Meopta but can't seem to find one in stock any where right now? Was also thinking about the Vortex Razor but not real keen on the button locations for brightness. Kind of hard to reach. Did you get the Meopta yet? |
|
|
|
Posted: 5/12/2015 12:46:07 PM EDT
[#48]
Quote HistoryQuoted:
Did you get the Meopta yet? Quote HistoryQuoted:
Quoted:
Quoted:
I'm trying to decide between the meopta or the rmr with the rm33 mount I'm leaning towards the Meopta but can't seem to find one in stock any where right now? Was also thinking about the Vortex Razor but not real keen on the button locations for brightness. Kind of hard to reach. Did you get the Meopta yet? Yes I did but haven't had a chance to do a review on it yet. Wife is TDY so I'm playing mister mom and my basement just flooded. Never a dull moment. Anyway, I did shoot it briefly and like it so far. Nice sight picture and easy to acquire the target. I need to go back and read the instructions because I was having issues adjusting the brightness when it first turned on but pretty sure it was me not pushing the button correctly. (long push vs. quick push etc.) It comes with a additional riser plus the one that is already on it. Initially I thought the one that came on it was removable so it could mount lower but it is not. You can take it off but it's actually the adapter for the QD mount and the mount will not go directly on the optic if that makes sense. I'll try and get some pics up soon. With that said it seems to be at a pretty good height for me as is. The real test will be when I can get a stock on it and see were my cheek weld is. Obviously it does not co-witness with the irons but for me the irons are way too low anyway. I'll try and follow up shortly with pics and more details. Sorry about the delay. |
|
|
|
Posted: 5/12/2015 8:35:43 PM EDT
[#49]
Quote HistoryQuoted:
Yes I did but haven't had a chance to do a review on it yet. Wife is TDY so I'm playing mister mom and my basement just flooded. Never a dull moment. Anyway, I did shoot it briefly and like it so far. Nice sight picture and easy to acquire the target. I need to go back and read the instructions because I was having issues adjusting the brightness when it first turned on but pretty sure it was me not pushing the button correctly. (long push vs. quick push etc.) It comes with a additional riser plus the one that is already on it. Initially I thought the one that came on it was removable so it could mount lower but it is not. You can take it off but it's actually the adapter for the QD mount and the mount will not go directly on the optic if that makes sense. I'll try and get some pics up soon. With that said it seems to be at a pretty good height for me as is. The real test will be when I can get a stock on it and see were my cheek weld is. Obviously it does not co-witness with the irons but for me the irons are way too low anyway. I'll try and follow up shortly with pics and more details. Sorry about the delay. Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
I'm trying to decide between the meopta or the rmr with the rm33 mount I'm leaning towards the Meopta but can't seem to find one in stock any where right now? Was also thinking about the Vortex Razor but not real keen on the button locations for brightness. Kind of hard to reach. Did you get the Meopta yet? Yes I did but haven't had a chance to do a review on it yet. Wife is TDY so I'm playing mister mom and my basement just flooded. Never a dull moment. Anyway, I did shoot it briefly and like it so far. Nice sight picture and easy to acquire the target. I need to go back and read the instructions because I was having issues adjusting the brightness when it first turned on but pretty sure it was me not pushing the button correctly. (long push vs. quick push etc.) It comes with a additional riser plus the one that is already on it. Initially I thought the one that came on it was removable so it could mount lower but it is not. You can take it off but it's actually the adapter for the QD mount and the mount will not go directly on the optic if that makes sense. I'll try and get some pics up soon. With that said it seems to be at a pretty good height for me as is. The real test will be when I can get a stock on it and see were my cheek weld is. Obviously it does not co-witness with the irons but for me the irons are way too low anyway. I'll try and follow up shortly with pics and more details. Sorry about the delay. Cool, post pics when you can. |
|
|
|
Posted: 5/12/2015 9:49:06 PM EDT
[#50]
I was thinking about one of these:
I figure with all of the mounting options there should be something to give an absolute cowitness. Thoughts? For those that bought the Sparc 2, how does it cowitness? My OCD won't allow anything but absolute 
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
