This is what i got...
Upper;
•Spike's Tactical M4 flat top upper receiver, Machined from a 7075 T6 Mil-Spec Forging with Mil-Spec Type III Hard coat Anodized finish, T-markings, Spike’s logo and M4 feed ramps.
•Barrel is certified MIL-B-11595E CMV. Bolt & barrel are HPT/MPI tested, M4 barrel extension, Chrome chamber and bore, 5.56mm Nato chamber, 1:7 Twist, Magnetic particle testing on every barrel, Phosphate finish.
•Lightweight (Pencil) Profile with Mid-length gas system.
•Barrel is Phosphate finished under the .625 F marked A2 front sight base.
•The M16 carriers are Chrome lined with a Mil-Spec phosphate finish.
•Forged Mil-Spec carrier key, Chrome lined, attached with Grade 8 hardware and Properly staked.
•HP/MP Tested Bolt, Each extractor is fitted with a Mil-Spec black insert and Mil-Spec Viton o-ring.
•Magpul MOE heat shield lined black handguards.
•Pinned Spike's Tactical DyanComp Muzzle Break.
Magpul BUIS Rear
Lower;
FMK AR-1 Patriot (Polymer) No need to debate the worth of a poly lower... i bouht it to support the NRA.
GMMG lower parts kit
Tapco 6 position stock (pinned to make it legal)
Old 30 rd magazine from my USMC reserve days. It has to be pre-ban since i haven't been in since 96... and it was fuc%ing old then.
After i take the Bayo lug off, it should be legal... until then it remains in 2 parts...