User Panel
User Panel
User Panel
|
Posted: 3/13/2020 9:21:09 AM EDT
[#1]
Quote HistoryQuoted:
My 10.5 LMT runs best with a standard carbine buffer. H2 would cause some issues. I haven’t tried an H1. I have also not tried an h1 yet. Odin makes an adustable buffer, might try that. |
|
|
|
Posted: 3/17/2020 1:01:14 PM EDT
[#2]
Milspec spring and H2 buffer, never an issue. Use a M4 upper on the same lower, never change a thing.
|
|
|
|
Posted: 3/20/2020 3:17:32 PM EDT
[#3]
DD MK18, normal carbine spring with H2 buffer, GTG.
|
|
|
|
Posted: 3/20/2020 11:24:00 PM EDT
[#4]
I run H3's in both BCM 11.5" and MK18, suppressed and unsuppressed. No issues with either with 5.55 ammo.
|
|
|
|
Posted: 3/20/2020 11:42:24 PM EDT
[#5]
I run a X buffer all the time on a 11.5 that I suppress sometimes, it’ll run fine. Ran same config in a 10.3 also and it ran fine. At first we ran H3 unsuppressed and X suppressed, but it was annoying to swap them.
|
|
|
|
Posted: 3/21/2020 12:40:12 AM EDT
[#6]
I have a Colt factory 10.3” barrel and running colt buffers with a plain Colt standard carbine spring. I don’t get bolt bounce with an H1/H2/H3 (verified by slowmo cellphone video) and it locks back on all 3 unsuppressed with good M193 ammo.
I choose to run the H3 with a silencer attached but I switch to an H2 when unsuppressed. Without the extra pressure, the H3 RPM is just too slow for my tastes and the H2 suppressed cyclic rate starts to get a bit sporty. RPMs are about the same between the unsuppressed H2 and suppressed H3. The cyclic rate of the H1 cycles just TOO fast even without the silencer. It definitely starts throwing brass way forward with some gusto. I can’t imagine the RPM with a suppressed H1 or CAR buffer on my 10.3” |
|
|
|
Posted: 3/21/2020 12:50:13 AM EDT
[#7]
H2 and SpringCo Blue plus a Gemtech suppressor bolt carrier.
Runs great and no gas to the face. Noveske 10.5 inch... |
|
|
|
Posted: 4/15/2020 2:22:11 PM EDT
[#8]
I only run H2, with normal spring. My 10.3" (with .070 gas port) runs perfect suppressed and unsuppressed. Same with my 14.5" guns.
|
|
|
|
Posted: 4/17/2020 12:23:58 AM EDT
[#9]
Quote HistoryQuoted: I only run H2, with normal spring. My 10.3" (with .070 gas port) runs perfect suppressed and unsuppressed. Same with my 14.5" guns. Yeah man...thats what I ended up getting. Like I said...its for the DD MK18 10.3 with the same size gas port. Thanks and to all that gave some input, thanks! Chris |
|
|
|
Posted: 4/17/2020 12:30:47 AM EDT
[#10]
Where are you ejecting?
|
|
|
|
Posted: 4/19/2020 8:55:56 AM EDT
[#11]
Quote HistoryQuoted: Where are you ejecting? Isn't all set up yet. Need to get a stamp on it, and get sopmod stock for it. |
|
|
|
Posted: 4/21/2020 9:06:13 AM EDT
[#12]
I have a DD 10.3 that I run with a bootleg adjustable carrier, a standard carbine buffer, and a JP polished spring. The rifle will not run steel case ammo. Brass case runs and ejects to the 4 to 5 o clock position.
|
|
|
|
Posted: 4/21/2020 9:14:17 AM EDT
[#13]
Standard buffer and spring since 08, 10.5", 7.5" 14.5" no problems
|
|
|
|
Posted: 4/21/2020 9:34:13 AM EDT
[#14]
Not an mk18 but both h2 and h3 run flawless in my 11.5s
|
|
|
|
Posted: 7/24/2020 2:22:04 AM EDT
[#15]
My 14.5 Colt Socom runs an H2 and red springco spring reliably
|
|
|
|
Posted: 7/24/2020 3:00:10 AM EDT
[#16]
H2 and standard colt spring here.
|
|
|
|
Posted: 7/24/2020 3:08:06 AM EDT
[#17]
10.3 with .070 gas port and a KVP 4.3 ounce buffer. It's only .3 ounces less than an H2 and I can run .223 and 5.56 reliably.
|
|
|
|
Posted: 8/12/2020 2:15:17 AM EDT
[#18]
I run a H2 and Sprinco blue in my DD Mk18.
|
|
|
|
Posted: 8/13/2020 2:44:18 PM EDT
[#19]
I was running a Colt H2 buffer paired with a Colt carbine spring. Recently switched the spring to the Damage Industries $5 spring to get rid of the “sproing” sound shooting suppressed.
|
|
|
|
Posted: 8/13/2020 3:21:22 PM EDT
[#20]
Quoted: LMT and DD both tell me run H Buffers. Well yesterday oredered a damn H2 buffer by mistake. Guys think it should be ok....Im in texas, so winter is a joke. FWIW, if you called Noveske, they would tell you to run the H2. |
|
|
|
Posted: 3/2/2021 1:42:51 AM EDT
[#21]
I have an A5 setup with their H2 and it runs well. I don't know if they're the same.
|
|
|
|
Posted: 3/2/2021 1:50:44 AM EDT
[#22]
Yes.
In a short barrel carbine gas 5.56 rifle. Read the Crane report. |
|
|
|
Posted: 3/2/2021 2:09:21 AM EDT
[#23]
I run a Colt H2 in my MK18 (Colt factory 10.3" barrel with colt spring) when unsuppressed and an H3 in it when suppressed (Turbo K).
Rate of fire starts to get a bit too quick with the can and just the H2 (900+ rpm). |
|
|
|
Posted: 3/3/2021 11:18:23 AM EDT
[#24]
Quote HistoryQuoted: H2 with suppressor and adjustable BCG. No issues ^^^^ |
|
|
|
Posted: 3/10/2021 8:29:42 PM EDT
[#25]
Have a H3 with my 10.5", suppressed with a Maxim CQB stock
|
|
|
|
Posted: 3/29/2021 5:36:36 AM EDT
[#26]
H2 is standard for 10.3" and 14.5" for SOCOM guns. That's semi/automatic in suppressed/unsuppressed. Standard carbine recoil spring.
CD |
|
|
|
Posted: 3/29/2021 10:28:29 PM EDT
[#27]
If you are using a 10" SBR upper (or really any upper), get an A5 buffer tube setup. I like the "Amphibian" setup with the A5 tube, Tubbs flat spring, and Kynshot RB5007 buffer.
|
|
|
|
Posted: 4/6/2021 1:38:10 PM EDT
[#28]
Older factory mk18 sbr with the gas port the size of a swimming pool and a turbo k- Springco red and a H3 buffer
|
|
|
|
Posted: 4/11/2021 2:37:09 AM EDT
[#29]
Quote HistoryQuoted: H2 and SpringCo Blue plus a Gemtech suppressor bolt carrier. Runs great and no gas to the face! Same here except with a AndroCorp Crane spec 10.3". The Carrier made HUGE difference in the gas! I also use a H2 and SpringCo blue with a DD civi 10.3" (with adjustable gas block tuned to run unsuppressed) barrel and it runs great. |
|
|
|
Posted: 4/11/2021 2:56:48 PM EDT
[#30]
I use the H2 buffers in an 8.5" and 10.5" barreled pistols. No issues so far. Oh, standard carbine buffer springs.
|
|
|
|
Posted: 5/14/2021 2:19:15 PM EDT
[#31]
I run spikes T-3 buffers with Geissele buffer spring in every SBR I own ... 14.5, 12, 10.5, and a 7.5"
in full disclosure, I run them all suppressed 90% of the time, all with bootlegg adjustable carriers its the best combo I have found |
|
|
|
Posted: 6/14/2021 7:47:35 PM EDT
[#32]
i have a colt H2 and a colt H3. I been running the H3 in my DD MK18 and a M4 2000. Zero issues with the H3. I havent used the H2 because I never switched the H3 out. I think the H2 would of run just as well
|
|
|
|
Posted: 6/14/2021 7:51:46 PM EDT
[#33]
I run an H in my LMT because its what I had but H2 on suppressed rifles less than 11.5".
|
|
|
|
Posted: 6/20/2021 5:49:15 AM EDT
[#34]
Quote HistoryQuoted: Same here except with a AndroCorp Crane spec 10.3". The Carrier made HUGE difference in the gas! I also use a H2 and SpringCo blue with a DD civi 10.3" (with adjustable gas block tuned to run unsuppressed) barrel and it runs great. Quote HistoryQuoted: Quoted: H2 and SpringCo Blue plus a Gemtech suppressor bolt carrier. Runs great and no gas to the face! Same here except with a AndroCorp Crane spec 10.3". The Carrier made HUGE difference in the gas! I also use a H2 and SpringCo blue with a DD civi 10.3" (with adjustable gas block tuned to run unsuppressed) barrel and it runs great. Pic of said rifle  |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
