So you want to use this one.............
http://www.midwayusa.com/viewproduct/?productnumber=235832
My .02.......
Well, I had one (RCBS primer pocket swager) and it was the pitts, just too slow for me. And, that was with a regular press.
IF it were me..........
I'd use a hand held reamer. It's faster and the learning curve is so short. Just insert the reamer, twist, remove the case and it's on to the next one. It's the sort of mindless operation that could be done while watching TV.
Then........
About the resizing operation using the hand press...........
I have used LEE's hand press to process .308W brass...........it took a lot of effort to get those handles together when F/L resizing brass for my M1A.
Anyway, that is the reason why I'd recommend LEE's cheap C press over their hand press IF money was the issue. The C press is almost the same price and so much easier to use. Not to mention that it could be mounted. Leaving hands free to grab cases and pull the handle..........mucho.......FASTER.
Then........
Try seating bullets while balancing cases filled with powder.
OK, Ok, ok.........YMWV, for those that will post back that they have, "no problems."
That all being said............you want it or already have it.............good luck.
Aloha, Mark