Quoted:
What do you mean tag cleaning info?
He wants to know how often or well you clean the gun, IMO.
My gsg does not have the screw kit. The bolt screws were tight on teardown. The hex screw behinh the stock for the bolt stop plate was loose upon teardown. Also the set screw for the barel behind the foregrip was loose.
The screw kit will eliminate a LOT of evil in the GSG, IMO.
How often are you vets cleaning and lubing?
I clean mine EVERY time I shoot more than 1 mag thru it. I won't strip the bolt down but I will remove it & spray it with Gun Scrub until it's clean. Then I use a pipe cleaner to coat oil on EVERYTHING inside the receiver tube that's metal. IOW, the entire bolt, rails & inside of the receiver gets a thorough coating of CLP.
What's the concensus on me using the wheel bearing grease for this assembly this one time?
I ran
gun grease once in mine. It was like it had molasses on it.
Keep in mind the .22 is both a low pressure as well as a low temp rd. IOW it won't heat up a bolt like a .223 will, so grease on a bolt is just too much for the bolt to overtake, IMO.
My .o2