User Panel
User Panel
User Panel
|
Posted: 6/24/2016 1:08:09 AM EDT
Anyone use one of these AXTS Freedom Bone charging handles with ported shaft suppressed? I run Raptor charging handles on my SBR AR's and love them. Just wondering if there really is much of a reduced blowback with this design? Will the RTV silicone trick work with the actuating levers on the Raptor? My DD MK18 is seriously over gassed, and shooting it (I'm a lefty) is blinding after 5-6 rounds. I put a MicroMoa Govnah on my other 5.56 SBR, and it runs like a dream, but the Govnah won't fit under the RIS II rail on the MK18, and I'm trying to find other ways to tame the blowback, but don't want to waste money "experimenting".
 " />
|
|
|
|
Posted: 6/24/2016 7:11:55 AM EDT
[#1]
The modified version of the Govnah was specifically machined to work with the RIS II and Geissele rails with no mods or contact.
Unfortunately, we are currently out of stock of the modified version pictured below. Thanks!  |
|
|
|
Posted: 6/24/2016 8:39:18 AM EDT
[#2]
Quote HistoryQuoted:
The modified version of the Govnah was specifically machined to work with the RIS II and Geissele rails with no mods or contact. Unfortunately, we are currently out of stock of the modified version pictured below. Thanks! http://cdn3.bigcommerce.com/s-j1m3pz/products/79/images/571/MK18_machined_2__09545.1451616588.1280.1280.jpg?c=2 Oh hell yeah!!!! That makes my day! |
|
|
|
Posted: 6/24/2016 8:42:19 AM EDT
[#3]
Quote HistoryQuoted:
The modified version of the Govnah was specifically machined to work with the RIS II and Geissele rails with no mods or contact. Unfortunately, we are currently out of stock of the modified version pictured below. Thanks! http://cdn3.bigcommerce.com/s-j1m3pz/products/79/images/571/MK18_machined_2__09545.1451616588.1280.1280.jpg?c=2 I think this is a far better answer than a charging handle with holes in it. |
|
|
|
Posted: 6/24/2016 9:01:02 AM EDT
[#4]
Love me some Govnah.
|
|
|
|
Posted: 6/24/2016 9:26:55 AM EDT
[#5]
I had no idea Micro Moa started making a new block that fit under the RIS II rail. I run a Govnah on my other 10.5" SBR, and it runs like a top. I'm looking forward to them getting in the reduced blocks. Very exciting news to me as the MK18 was in a holding pattern as it only gets ran suppressed.
|
|
|
|
Posted: 6/24/2016 9:57:39 AM EDT
[#6]
Quote HistoryQuoted:
The modified version of the Govnah was specifically machined to work with the RIS II and Geissele rails with no mods or contact. Unfortunately, we are currently out of stock of the modified version pictured below. Thanks! http://cdn3.bigcommerce.com/s-j1m3pz/products/79/images/571/MK18_machined_2__09545.1451616588.1280.1280.jpg?c=2 How much needs to be taken off to fit a Geissele rail? I might just have to borrow the milling machine at work. |
|
|
|
Posted: 6/24/2016 12:13:34 PM EDT
[#7]
Quote HistoryQuoted:
How much needs to be taken off to fit a Geissele rail? I might just have to borrow the milling machine at work. Quote HistoryQuoted:
Quoted:
The modified version of the Govnah was specifically machined to work with the RIS II and Geissele rails with no mods or contact. Unfortunately, we are currently out of stock of the modified version pictured below. Thanks! http://cdn3.bigcommerce.com/s-j1m3pz/products/79/images/571/MK18_machined_2__09545.1451616588.1280.1280.jpg?c=2 How much needs to be taken off to fit a Geissele rail? I might just have to borrow the milling machine at work. None, it fits under my MK5 without modification. |
|
|
|
Posted: 6/24/2016 3:21:49 PM EDT
[#8]
Quote HistoryQuoted:
How much needs to be taken off to fit a Geissele rail? I might just have to borrow the milling machine at work. Quote HistoryQuoted:
Quoted:
The modified version of the Govnah was specifically machined to work with the RIS II and Geissele rails with no mods or contact. Unfortunately, we are currently out of stock of the modified version pictured below. Thanks! http://cdn3.bigcommerce.com/s-j1m3pz/products/79/images/571/MK18_machined_2__09545.1451616588.1280.1280.jpg?c=2 How much needs to be taken off to fit a Geissele rail? I might just have to borrow the milling machine at work. Standard Govnah worked no problem under my Mk 4 but the 3 position plate combined with a carbine gas (9.5" rail) won't adjust to the left/right positions, so you'll have to go 2 port or grind something. |
|
|
|
Posted: 6/24/2016 4:19:50 PM EDT
[#9]
Not a new block. Same block with additional machining operations. We did about 50 of them. It is additional $20 for the additional work. They sold out faster than anticipated.
|
|
|
|
Posted: 6/24/2016 8:57:30 PM EDT
[#10]
Quote HistoryQuoted: I think this is a far better answer than a charging handle with holes in it. Quote HistoryQuoted: Quoted: The modified version of the Govnah was specifically machined to work with the RIS II and Geissele rails with no mods or contact. Unfortunately, we are currently out of stock of the modified version pictured below. Thanks! http://cdn3.bigcommerce.com/s-j1m3pz/products/79/images/571/MK18_machined_2__09545.1451616588.1280.1280.jpg?c=2 I think this is a far better answer than a charging handle with holes in it. |
|
|
|
Posted: 6/24/2016 8:58:53 PM EDT
[#11]
Quote HistoryQuoted: Standard Govnah worked no problem under my Mk 4 but the 3 position plate combined with a carbine gas (9.5" rail) won't adjust to the left/right positions, so you'll have to go 2 port or grind something. Quote HistoryQuoted: Quoted: Quoted: The modified version of the Govnah was specifically machined to work with the RIS II and Geissele rails with no mods or contact. Unfortunately, we are currently out of stock of the modified version pictured below. Thanks! http://cdn3.bigcommerce.com/s-j1m3pz/products/79/images/571/MK18_machined_2__09545.1451616588.1280.1280.jpg?c=2 How much needs to be taken off to fit a Geissele rail? I might just have to borrow the milling machine at work. Standard Govnah worked no problem under my Mk 4 but the 3 position plate combined with a carbine gas (9.5" rail) won't adjust to the left/right positions, so you'll have to go 2 port or grind something. |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
