User Panel
User Panel
User Panel
|
Posted: 1/12/2020 9:16:50 PM EDT
[#1]
Quote HistoryQuoted:
@shifty522 I have a CZ455 and am looking for a setup like that. What rail is on the forward clip-on? |
|
|
|
Posted: 1/13/2020 12:11:20 AM EDT
[#2]
Thanks brother!
|
|
|
|
Posted: 1/13/2020 12:53:23 AM EDT
[#3]
Good for one-handed varmint control, and it leaves the left hand open to hold my martini glass. |
|
|
|
Posted: 1/13/2020 11:25:29 AM EDT
[#4]
Quote HistoryQuoted:
https://i.imgur.com/J0Pm0PZ.jpg Good for one-handed varmint control, and it leaves the left hand open to hold my martini glass. also, i'm not seeing a martini glass in the pic..... |
|
|
|
Posted: 1/13/2020 6:48:50 PM EDT
[#5]
@DirtyHandsRob it's an IDF helmet cover (mitznefet).
Agilite sells these. They turn up everywhere...I found one at a militaria show...seller had no idea what it was. https://agilitegear.com/products/mitznefet-multicam |
|
|
|
Posted: 2/3/2020 2:04:37 PM EDT
[#6]
Just waiting on my SBR to come back and my CMMG build will be done.
For people that run the CMMG stuff, is there any bolt spare parts I need to keep on hand? I remember reading something about common failure points on these but can't seem to recall what that was. |
|
|
|
Posted: 2/3/2020 7:04:35 PM EDT
[#7]
Quote HistoryQuoted:
https://i.imgur.com/J0Pm0PZ.jpg Good for one-handed varmint control, and it leaves the left hand open to hold my martini glass. 1. Buy that pistol 2. Buy that can 3. Move states |
|
|
|
Posted: 2/8/2020 12:00:46 PM EDT
[#8]
Just threw my DBAL on this thing. I haven't taken it out of the safe in two years...now it needs its own laser.
Can is currently attached using the Gemtech QDA. It'd be about an inch or so shorter without that device.  Attached File |
|
|
|
Posted: 2/8/2020 4:32:02 PM EDT
[#9]
I'm working on a Ruger Mark II cut down to 4.5" with a Holosun HS507c and a Dead Air Mask. It will be my night plinker.
|
|
|
|
Posted: 2/9/2020 12:51:37 AM EDT
[#10]
Quote HistoryQuoted:
I'm definitely getting a thermal that I can swap around to other rifles. I'd be really happy if FLIR dropped a 640 weapons mountable breach at Shot 2020. I'm intrigued by the idea of a clip on, but the "affordable" ones are giant and clunky looking, and the reasonably sized ones are like 15k lol. |
|
|
|
Posted: 2/9/2020 4:19:26 PM EDT
[#11]
Cool guns guys
|
|
|
|
Posted: 2/23/2020 10:17:44 PM EDT
[#12]
Alright. It looks dumb, but if it works, it ain’t dumb. Thats what I tell myself anyways.
I already had all the major pieces sitting around. The upper, the Lil’P, the Aurora, the flash light, and the suppressor. Just got the mounts and put it all together. For a 22 it is surprisingly nice.  Attached File |
|
|
|
Posted: 2/24/2020 1:13:00 AM EDT
[#13]
Quote HistoryQuoted:
You know where I can find more information on the new 640 breach? Quote HistoryQuoted:
Quoted:
I'm definitely getting a thermal that I can swap around to other rifles. I'd be really happy if FLIR dropped a 640 weapons mountable breach at Shot 2020. I'm intrigued by the idea of a clip on, but the "affordable" ones are giant and clunky looking, and the reasonably sized ones are like 15k lol. |
|
|
|
Posted: 2/24/2020 8:05:02 AM EDT
[#14]
For those running thermal and NV scopes on their 22s, do any of these units have any sort of BDC reticle? A .22 more than almost anything else seems to benefit from some sore of BDC to gauge your holds, even inside 100 yards. Pretty sure the answer is no, but figured its worth asking.
Something like the Pulsar Core RXQ30V on a Ruger Precision Rimfire could be devastatingly effective for a lot of things, but a BDC could help a lot. |
|
|
|
Posted: 2/24/2020 9:07:23 AM EDT
[#15]
I haven't seen anything thermal with a dedicated 22lr BDC but one or two models of the Halo line have a laser range finder that is supposed to work great. I don't recall if it's for 22lr though
|
|
|
|
Posted: 2/24/2020 10:08:12 AM EDT
[#16]
Quote HistoryQuoted:
For those running thermal and NV scopes on their 22s, do any of these units have any sort of BDC reticle? The Trail XP50 LRF / Ruger Charger combo I posted earlier does this excellently when paired with Strelok Pro (screenshot attached). The laser range finding feature of the scope gives precise measurements. The RXQ30V Core has 10 reticle options. Each reticle has a different pattern with a specific MOA values detailed in the reticle catalog. Hat tip to @UNV for hosting this information. 
|
|
|
|
Posted: 3/7/2020 7:40:13 PM EDT
[#17]
Almost done.
Sighted it in last night. Going for my first kill tonight. Still waiting on my can. :/ 
Trying a few different optic setups. |
|
|
|
Posted: 3/7/2020 8:51:08 PM EDT
[#18]
Integrally Suppressed Gemtech Mist Sub-sonic sniper Dillo Mag dump
  
|
|
|
|
Posted: 3/7/2020 9:19:24 PM EDT
[#19]
Quote HistoryQuoted:
Almost done. Sighted it in last night. Going for my first kill tonight. Still waiting on my can. :/ https://i.ibb.co/7pMn2wG/E7-C424-A4-355-B-41-B6-8-D92-ADE75-C709-E58.jpg Trying a few different optic setups. Good luck |
|
|
|
Posted: 3/8/2020 4:53:39 PM EDT
[#20]
I would not call this a "dedicated" night setup, because it sees more daytime use than anything else, but last night it put the hurtin' on steel at 110 yards.
 Night vision target shooting ANVRS MK3 |
|
|
|
Posted: 4/19/2020 7:42:13 AM EDT
[#21]
Love this thread, bump for more setups!
|
|
|
|
Posted: 4/19/2020 8:01:30 AM EDT
[#22]
Barrel threading came out great. Waiting on the stamp for my Mask still. The little Holosun looks great through my PVS14. Gonna be a lot of fun.
|
|
|
|
Posted: 4/19/2020 10:17:08 AM EDT
[#23]
In the works...everything but the action is in hand.
|
|
|
|
Posted: 4/19/2020 10:20:40 AM EDT
[#24]
Quote HistoryQuoted: I would not call this a "dedicated" night setup, because it sees more daytime use than anything else, but last night it put the hurtin' on steel at 110 yards. https://i.imgur.com/Ig47KT9.jpg  https://www.youtube.com/watch?v=TAk-W6jnhTcNice video, thanks for sharing. It reminded me that it has been almost a month since I did some suppressed rimfire NV action. I will be rectifying that over the next couple nights 
|
|
|
|
Posted: 4/19/2020 10:30:10 AM EDT
[#25]
Quote HistoryQuoted: I would not call this a "dedicated" night setup, because it sees more daytime use than anything else, but last night it put the hurtin' on steel at 110 yards. https://i.imgur.com/Ig47KT9.jpg https://www.youtube.com/watch?v=TAk-W6jnhTcLOL, love the narrative..."In the faaace", "oh my". Also why you seem to be whispering at the beginning? Trying not to wake the wife?  Great vid and that Hogster IR Lum seems to be doing well at 940nm. Gonna be adding to this thread as soon as I get the nerve to walk into my local GS to pick up FOUR Form 4 treats that have just come in!
|
|
|
|
Posted: 4/19/2020 11:53:03 AM EDT
[#26]
Quote HistoryQuoted: Barrel threading came out great. Waiting on the stamp for my Mask still. The little Holosun looks great through my PVS14. Gonna be a lot of fun. https://i.imgur.com/2qoqzlN.jpg This is exactly the pistol and sight I settled on. I bought the threaded version of the gun. Use a Sparrow on mine. Works like a champ once a few tricks are learned. For all the reasons SkyPup (as I recall) stated in a post long ago, I settled on the 45 grain Winchester Subsonics in mine. Work 100%. Hit hard. |
|
|
|
Posted: 4/19/2020 11:53:21 AM EDT
[#27]
Quote History@shifty522 What rail mount is that up front and what action is the stock for? I'm headed thermal with my CZ455 but a clip on NV would be sweet too |
|
|
|
Posted: 4/19/2020 1:01:12 PM EDT
[#28]
Quote HistoryQuoted: @shifty522 What rail mount is that up front and what action is the stock for? I'm headed thermal with my CZ455 but a clip on NV would be sweet too Quote HistoryQuoted: What rail mount is that up front and what action is the stock for? I'm headed thermal with my CZ455 but a clip on NV would be sweet too Looks like a Badger Ordnance EFR. |
|
|
|
Posted: 4/19/2020 1:17:36 PM EDT
[#29]
 Attached File10.5" converted cmmg AR Day scope x400v for IR laser CCI HP/Segmented 45grain "suppressor" Day/night work for part of my job duties. (3) coons (1) red fox (2) possum (1) skunk multiple birds This week! |
|
|
|
Posted: 4/19/2020 2:29:28 PM EDT
[#30]
Quote HistoryQuoted: https://www.AR15.Com/media/mediaFiles/361596/7C7A2697-FA74-44E5-8F2C-5FE3B7EFB3CD_jpe-1375504.JPG 10.5" converted cmmg AR Day scope x400v for IR laser CCI HP/Segmented 45grain "suppressor" Day/night work for part of my job duties. (3) coons (1) red fox (2) possum (1) skunk multiple birds This week! Go on... 
|
|
|
|
Posted: 4/20/2020 7:35:35 AM EDT
[#31]
Quote HistoryQuoted: Looks like a Badger Ordnance EFR. |
|
|
|
Posted: 4/20/2020 7:44:28 AM EDT
[#32]
I've never been a bolt gun guy but I'm super happy with the CZ455. It's a riot to shoot and the accuracy using Gemtech subsonic ammo is excellent, it's right at 2 inches at 100 yards and stupid quiet. I mean stupid quiet. We take shots at rabbits and squirrels and they don't react to misses
The PA 22 scope is going to remain the daylight optic, but rather than have a second rifle dedicated to thermal I'm going to try using the Skeet + Holosun on top to make the CZ the all around shooter. I've got a second Wilcox on backorder and am really looking forward to it showing up 
|
|
|
|
Posted: 4/21/2020 7:45:23 AM EDT
[#33]
Quote HistoryQuoted: @shifty522 What rail mount is that up front and what action is the stock for? I'm headed thermal with my CZ455 but a clip on NV would be sweet too |
|
|
|
Posted: 4/21/2020 10:32:39 AM EDT
[#34]
Quote HistoryQuoted: I've never been a bolt gun guy but I'm super happy with the CZ455. It's a riot to shoot and the accuracy using Gemtech subsonic ammo is excellent, it's right at 2 inches at 100 yards and stupid quiet. I mean stupid quiet. We take shots at rabbits and squirrels and they don't react to misses The PA 22 scope is going to remain the daylight optic, but rather than have a second rifle dedicated to thermal I'm going to try using the Skeet + Holosun on top to make the CZ the all around shooter. I've got a second Wilcox on backorder and am really looking forward to it showing up https://www.AR15.Com/media/mediaFiles/73202/20200419_164925-1376907.jpg That is awesome. Thanks for sharing. |
|
|
|
Posted: 4/21/2020 6:20:58 PM EDT
[#35]
@TechOps
how do you like the SureFire X400V and whats the practical effective range of the laser |
|
|
|
Posted: 4/21/2020 8:38:43 PM EDT
[#36]
Quote HistoryQuoted: @TechOps how do you like the SureFire X400V and whats the practical effective range of the laser I can see the laser for over 800 yards, but have never attempted anything over say 100 yards due to Identification. My typical shots are inside of 50 yards. |
|
|
|
Posted: 4/22/2020 12:53:29 AM EDT
[#37]
My kingdom, my kingdom for a Charger takedown. Ugh. This is definitely my next buy.
|
|
|
|
Posted: 4/23/2020 12:14:23 PM EDT
[#38]
Quote HistoryQuoted: I have been asking here on ARF and a few other places about an extended rail for my 10/22 so I can mount a clip-on in front of a LPVO . Once member responded with what he put together using a bunch of risers and a Pulsar mount, but it was way to busy for me. Others have suggested a Leapers Tactical Scout Slim Rail but some others have said it is flimsy. So I am not sure it would support the 1.7lb weight of a clip-on without bending a bit. https://www.AR15.Com/media/mediaFiles/81561/Leapers_jpg-1223915.JPG I inquired with MDT to see if their Remington 700 extended rail could be adapted to a Ruger 10/22 and they said no. For years I have been using a monoloc with an old Leupold 2-7 compact. The glass is not great so anything beyond 4x the center of the image gets bad. Currently I am investigating if a NV rail can be incorporated into the stock of an after market Ruger stock, but not sure if the price will be tolerable. I too have been having a hard time finding one, my 10/22 is a KIDD rifle that I put together and has a hogue stock, nothing works with that stock so I might just keep it a daytime gun and run a nighttime AR 22 upper. I just need the barrel and bolt realistically, I have all the parts to make an upper. |
|
|
|
Posted: 4/23/2020 12:57:25 PM EDT
[#39]
Just starting to build one.
Picked this up and put a Holosun 403R on it. Form 1 silencer got approved this week and I will be submitting the form 1 to SBR it. Now I just need to figure out which IR laser/illuminator to use for it. 
|
|
|
|
Posted: 4/23/2020 2:36:41 PM EDT
[#40]
Quote HistoryQuoted: I too have been having a hard time finding one, my 10/22 is a KIDD rifle that I put together and has a hogue stock, nothing works with that stock so I might just keep it a daytime gun and run a nighttime AR 22 upper. I just need the barrel and bolt realistically, I have all the parts to make an upper. |
|
|
|
Posted: 5/18/2020 4:45:52 PM EDT
[#41]
My entry into the close up and personal extreme critter extermination...
 
|
|
|
|
Posted: 5/18/2020 5:11:06 PM EDT
[#42]
Quote HistoryOriginally Posted By TNVC: My entry into the close up and personal extreme critter extermination... https://www.ar15.com/media/mediaFiles/19096/tnvcsmg3-1422066.jpg https://www.ar15.com/media/mediaFiles/19096/tnvcsmg2-1422067.jpg That's fukkin awesome. Who makes that can? |
|
|
|
Posted: 5/18/2020 5:17:00 PM EDT
[#43]
Form 1
|
|
|
|
Posted: 5/19/2020 8:14:27 PM EDT
[#44]
|
|
|
|
Posted: 5/19/2020 9:15:49 PM EDT
[#45]
 The X400V has since been replaced with an X300V since I wasn't using the laser at all. |
|
|
|
Posted: 5/25/2020 5:27:53 PM EDT
[#46]
|
|
|
|
Posted: 5/25/2020 6:06:15 PM EDT
[#47]
Love the new SF entry as well. It's great going back and forth on pistol setups like this as we can throw them on and off not worry about re-zeroing.
 
|
|
|
|
Posted: 5/25/2020 6:27:54 PM EDT
[#48]
So this just cleared Form 4 not too long ago, my prized AWC Integrally Suppressed Amphibian. It's been my dream HG for a looooong time and I took it out to shoot today and I have to say this latest Amphibian is the quietest HG I have EVER shot. I go waaaay back with AWC Systems Technology when Lynn McWilliams (RIP) who owned the company was a true revolutionary who worked very closely with NSW and so many LE groups back in the day. I still have two of their sniper guns, one of them a M92 with over 14K .308 rounds all logged. The throat has opened up a bit over the years and it does not hold that under .5moa, but hell maybe it's me it only holds 1moa as I get older!
 Anyhhoot, it's virgin old school sorta speak at the moment, but looking for some optic options. Our own Sam thinks the ARCO will do nicely on this, open to any other ideas.  
|
|
|
|
Posted: 5/25/2020 7:15:31 PM EDT
[#49]
Quote HistoryQuoted: So this just cleared Form 4 not too long ago, my prized AWC Integrally Suppressed Amphibian. It's been my dream HG for a looooong time and I took it out to shoot today and I have to say this latest Amphibian is the quietest HG I have EVER shot. I go waaaay back with AWC Systems Technology when Lynn McWilliams (RIP) who owned the company was a true revolutionary who worked very closely with NSW and so many LE groups back in the day. I still have two of their sniper guns, one of them a M92 with over 14K .308 rounds all logged. The throat has opened up a bit over the years and it does not hold that under .5moa, but hell maybe it's me it only holds 1moa as I get older! Anyhhoot, it's virgin old school sorta speak at the moment, but looking for some optic options. Our own Sam thinks the ARCO will do nicely on this, open to any other ideas. https://www.ar15.com/media/mediaFiles/19096/20200521_125019_resized-1432607.jpg https://www.ar15.com/media/mediaFiles/19096/20200521_125040_resized_edited-1432616.jpg Very sexy. Love my integral .22lr bolt gun, but never bit on the Amphibian or other integrally suppressed pistols when I was in stamp collector mode. As far as an RDS, I'm still partial to the RMR over the ARCO, especially since this isnt a boxy Glock. Less is more, IMHO, on a pistol like this. ETA: just noticed this is built on a Ruger MK4, so the reassembly ass pain has been negated. Didn't know they were building Amphibians on MK4s. (Evil thoughts for the credit card stirring.....) |
|
|
|
Posted: 5/25/2020 7:50:45 PM EDT
[#50]
Quote HistoryQuoted: Very sexy. Love my integral .22lr bolt gun, but never bit on the Amphibian or other integrally suppressed pistols when I was in stamp collector mode. As far as an RDS, I'm still partial to the RMR over the ARCO, especially since this isnt a boxy Glock. Less is more, IMHO, on a pistol like this. ETA: just noticed this is built on a Ruger MK4, so the reassembly ass pain has been negated. Didn't know they were building Amphibians on MK4s. (Evil thoughts for the credit card stirring.....) Quote HistoryQuoted: Quoted: So this just cleared Form 4 not too long ago, my prized AWC Integrally Suppressed Amphibian. It's been my dream HG for a looooong time and I took it out to shoot today and I have to say this latest Amphibian is the quietest HG I have EVER shot. I go waaaay back with AWC Systems Technology when Lynn McWilliams (RIP) who owned the company was a true revolutionary who worked very closely with NSW and so many LE groups back in the day. I still have two of their sniper guns, one of them a M92 with over 14K .308 rounds all logged. The throat has opened up a bit over the years and it does not hold that under .5moa, but hell maybe it's me it only holds 1moa as I get older! Anyhhoot, it's virgin old school sorta speak at the moment, but looking for some optic options. Our own Sam thinks the ARCO will do nicely on this, open to any other ideas. https://www.ar15.com/media/mediaFiles/19096/20200521_125019_resized-1432607.jpg https://www.ar15.com/media/mediaFiles/19096/20200521_125040_resized_edited-1432616.jpg Very sexy. Love my integral .22lr bolt gun, but never bit on the Amphibian or other integrally suppressed pistols when I was in stamp collector mode. As far as an RDS, I'm still partial to the RMR over the ARCO, especially since this isnt a boxy Glock. Less is more, IMHO, on a pistol like this. ETA: just noticed this is built on a Ruger MK4, so the reassembly ass pain has been negated. Didn't know they were building Amphibians on MK4s. (Evil thoughts for the credit card stirring.....) Love the quote "stamp collecting mode", NICE! Does this mean you're back? LolYea, pretty impressed with their latest Amphibian II built around the MKIV. Maintenance on the supressor and gun is quite easy and the sound suppression for this up close and personal Yote head shot instrument is gonna be a hoot. Been thinking RMR as well. God knows the number of small MRDS's I have laying around... These also come in FDE and black, not to upset your CC!  Edit, also gonna inquire about AWC drilling and tapping a few pic rail holes under the barrel for some laser goodies. Right now, I dont think any of the Amphibians have this...MUCH needed. |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
