Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
User Panel

Site Notices
Posted: 10/21/2016 7:44:34 PM EDT
Does anyone know of a tool that can be used to remove the factory rear sight on a Ruger 10-22 ?

I have been pounding on it with a hammer and punch.  It has moved some, but now it will not budge.

The rear sight broke, which is why I am replacing it.
Link Posted: 10/21/2016 8:05:05 PM EDT
[#1]
it might have taper pins. try the other direction.
Link Posted: 10/22/2016 8:54:51 AM EDT
[#2]
Thank you for your help.
Link Posted: 10/23/2016 1:27:21 PM EDT
[#3]
Don't forget some penetrating oil.
Link Posted: 10/23/2016 2:58:55 PM EDT
[#4]
I had a front sight I swear was welded on.   Tried everything.  I eventually cut the sight in half, we'll 99.8%. Then cracked it all the way with a rod and hammer.  
Link Posted: 10/24/2016 8:16:14 AM EDT
[#5]
Link Posted: 10/24/2016 8:34:56 PM EDT
[#6]
Discussion ForumsJump to Quoted PostQuote History
Quoted:
Mount the barrel in a vice with some scrap leather. Having the gun bounce around on the bench reduces the blow.


Use a brass drift punch and a good weighted hammer.

Tap from the left side of the gun to the right.

View Quote


I have removed and replaced several. Technique matters a lot. Its one of those jobs that after you screw it up the first time you learn all the tricks for the second time. A hammer and brass punch will remove them if all is done correctly. Its not as bad as it first seems.
Close Join Our Mail List to Stay Up To Date! Win a FREE Membership!

Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!

You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.


By signing up you agree to our User Agreement. *Must have a registered ARFCOM account to win.
Top Top