Recommended makers for holsters that support the above, off the shelf if possible? I can't tell if the P320 Mitch Rosen on the sig site works with tall sites. Inside or outside. RH.

Help is appreciated.

I don't know what you mean by off the shelf, but I have a Tucker gun leather DC-1 on order for a p320. While you wait the 5 months you could get a PHLSTER which seems to be in stock.

How high is high for you? There's an inexpensive Raven Perun that works nicely, but a .400 Dawson will not fit in it.

Desantis has a few options. (I'm not sure about sight heights on these.) You'll have to look up numbers if you don't like tan.

Speed Scabbard
Applications: SIG P320 AND P250 COMPACT/CARRY WITH OR WITHOUT ROMEO1 REFLEX SIGHT SIG P320 XCOMPACT
SKU: 002TA8HZ0
UPC: 792695342458

LEFTY Speed Scabbard
Applications: SIG P320 AND P250 COMPACT/CARRY WITH OR WITHOUT ROMEO1 REFLEX SIGHT SIG P320 XCOMPACT
SKU: 002TB8HZ0
UPC: 792695342465

Sidestep
Applications: SIG P320 & P250 COMPACT/CARRY WITH OR WITHOUT ROMEO1 REFLEX SIGHT SIG P320 XCOMPACT
SKU: 191TA8HZ0
UPC: 792695363767

Viper 2.0
Applications: SIG P365; P365 SAS
SKU: 175TC8JZ0
UPC: 792695355038

LEFTY Viper 2.0
Applications: SIG P365; P365 SAS
SKU: 175TD8JZ0
UPC: 792695355045

INFILTRATOR AIR
Applications: SIG P320C; P250C; P320 XCOMPACT
SKU: M78KAT1Z0
UPC: 792695348221

INFILTRATOR AIR
Applications: SIG P365; P365XL; P365 SAS; P365 WITH MANUAL SAFETY P365 XL W/ ROMEO ZERO
SKU: M78KA8JZ0
UPC: 792695348283

Criss-Cross
Applications: SIG P365; P365 SAS
SKU: 155TA8JZ0
UPC: 792695348429

LEFTY Speed Scabbard
Applications: SIG P320 & P250 FULL SIZE W/ OR W/OUT ROMEO1 REFLEX SIGHT SIG P320-M17 FULL SIZE
SKU: 002TB7HZ0
UPC: 792695342427

SLIM TUK
Applications: SIG P365 XL SIG P365 XL W/ ROMEO ZERO
SKU: 137KJ0PZ0
UPC: 792695364283

SLIM TUCK
Applications: SIG P320 & P250 COMPACT/CARRY WITH OR WITHOUT ROMEO1 REFLEX SIGHT
SKU: 137KJT1Z0
UPC: 792695338956

Oh I would give Dave a shout at Ronin Leather Holsters, he'll fix you right up and likely with a two week turn around.
Ronin

Thanks ill check out Ronin and Desantis. The height is nothing extreme just supressor height. Most holster sellers seem to leave out that detail.

Leather GLS

I used @LastRites advice and contacted David at Ronin Leather Holsters.  Thanks!

David was great to work with.  Almost too many options for what I was wanting.  I ended up ordering a OWB Okami holster for a 320C, TLR7 and RMR cut.  Holster was finished up with elephant trim to make it look cool.  I've had the holster for over a week and have been breaking it in slowly.  I like this holster a lot and can tell it's well made and built to last.  

Attached File

@220ST  is that elephant skin on the front or shark, very nice looking!
I ended up getting another holster for Ronin Leathers as I think my son is trying his hardest to talk me out of one of my 365's so I thought I'd prep myself, lol.  Anyways went with a double clip Ageis model, works well for me and is all day wear item in comfort.  The wing is one I cobbled up out of a chunk of aluminum as I prefer a little lower profile than most on the market.  I too have an Okami for a G29 that Dave made out of horsehide and all I can say is that it rides nice and is easy to wear, with the front belt snap makes it easy to get on and off the belt.

I've never noticed that fore and aft loops caused me much grief being threaded and unthreaded. How has changing one to a snap improved things for you?

I just checked with an M18 wearing a DPP and Dawson .400 front sight.

The Speed Scabbard and SideStep both swallow the sight nicely, though there is a little drag on the way out. The top corner of the sight may enlarge the channel a hair as you draw over time. These are likely to be my new carry holsters, so feel free to ask for updates later.

The Slim Tuk fits perfectly.

The Infiltrator Air seems to fit also, but the pistol will not go in all the way with a DPP mounted. Since use with an optic like the DPP is the only reason to have such a ridiculously tall front, fitment here is a moot point.

I have an M18 with a .400 front sight and DPP.

Holster is a PHLSTER Floodlight.

I get a little wear on one side of the front sight, but no drag that's noticeable.