No. The MAK-90 does not need compliance parts with a choate stock as that is a thumbhole.
The 922(r) parts compliance has been covered repeatedly.
On an AK the parts most likely used are
US parts usually used for compliance:
pistol grip
front handguards (count as one 1)
buttstock
fire control group / trigger, hammer, sear(disconnector) (3)
piston
muzzle attachment
mag baseplate
mag follower
mag body
receiver
stamped takes 5 or 6 depending on muzzle attachment
milled takes 4 without 5 with muzzle attachment
The 16 countable parts of an AK rifle. No more than 10 of these parts may be imported
(1) Receiver
(2) Barrel
(3) Trunnion
(4) Muzzle attachments(flash hiders, brakes, barrel extensions, barrel nuts)
(5) Bolt
(6) Bolt carrier
(7) Gas piston
(8) Trigger
(9) Hammer
(10) Disconnecter
(11) Buttstock
(12) Pistol grip
(13) Forearm handguards
(14) Magazine body
(15) Follower
(16) Floorplate
The underlined parts are the most commonly available U.S. manufactured parts.