Quoted: Bravo!
I love hearing from others with "the disease"
|
Really?
I kinda like the way
krinkfreak did it…
Romanian AKM (3) one will have a triangular metal sidefolder al la 74, the other two just black plastic furniture.
FAL a pristine StG kit that needs to go off and have the barrel cut to 17.7-inches (para length) and be assembled. Still need to get a DSA receiver for that one.
M1A that needs to make it’s way back down to Ron Smith have all the heavy barrel NM crap taken off of it and built back into a rack grade rifle.
M1 Garands just need to buy more of em from the CMP. All I really want is a 6 million serial number Springfield.
arfs oh boy.
Bushmaster SBR, sell the A2 upper and replace it with an A3 upper with heavy profile barrel fluted by ADCO and then mount an EOTech.
LMT SBR install RAS II and Aimpoint.
LMT M4 build will need an RAS, an Aimpoint (or maybe ACOG) and a Gemtech BiLock.
Colt Ligtweight SBR needs the lightweight A1 upper.
Bushmaster M4gery needs an Aimpoint and some more spraypaint
Have a Bushmaster A2 lower I would like to build into a copy of the Army’s DMR, I’ve got the lower so far.
I’d also like to use a Colt lower I have to build a copy of the Marine’s SAM-R, but that damn front sight isn’t available (yet).
The GUU-5P, I’ve been spending some time shooting the old Air Force GUU-5Ps and would absolutely love to build a good copy. It’ll take time to find all the old school parts though.
Remington 700s…
BDL in 338 Win Mag (don’t even have one yet} need to have the barrel cut down to between 20 and 22-inches. Most bang for the buck.
ADL in 270 Winchester have the barrel cut and re-crowned, have it parkerized and find a nice Leupold VX-III for it. A poor mans "accurate" rifle.
I’d like to find an old Remington 700 (pre 320000) short action (preferable 308) send it off to Mike Lau and have him build me a M40A3. This one will take some time.
In the mean time, if I happen to come across a good price on a 308 LTR, it’s on the "I need list."
PISTOLS
1911 One is actually going to be finished here in about two weeks. An old (before they ere built in Brazil) Springfield Armory 1911A1 is all blinged out and ready to run for Speed Steel
I’d like to have a matching set of Colt Mk IV Series 80 pistols (I’ve got one so far) as soon as I can find (and afford) a second I’ll have them cleaned up and made proper.
King ambis, beavertails, H/T/S, Novak sights, and checkered hammer spring housing.
I’d also like to build (or in my case, have built) a faithful forgery of the Marine Corps MEUSOC 1911. I need to find an old 1911A1 GI pistol to use as a foundation though.
Just picked up a
S&W 625 that needs to be cleaned up a bit, be worked over so it’s nice and smooth.
I think that’s about it for right now. Wow, that’s pretty therapeutic to sit for a minute and put all these ideas down.