ATLGA,
Do yourself a favor and look carefully at your fire control group. You may alreay have the Gordon Tech Fire Control Group installed in the rifle.
A couple of years ago Gordon Tech got a hold of all of the SLR-95s that were being imported into the country and put their fire control group and their gas piston in the rifles. Both me and my gunsmith bought our rifles approximately 6 months apart at different gun shops and both SLR-95s had the Gordon Tech parts installed in the rifles.
Most of the rifles that I have seen that have the Gordon Tech parts in them have the following etched into the left side toward the rear of the receiver:
Intrac Knox, TN
DAG VA BCH, VA (this will have a line etched through it)
Made in Bulgaria
Look for "G2", "GTECH", and "USA" on the left side of the fire control parts. You will have to get a good flashlight and look closely. If your SLR-96 is one of the rifles that alreay has the Gordon Tech parts in it, the rifle has 4 parts that were made in the USA.