LOL, HAHA. I am sorry, I am totally ready to give up and sell the kit. If they used any softer rivets on the yugos they might as well have used lead, that way I could just melt them out. I tried drilling out the front long rivet in the trunion, broke the drill bit. Tried comming in from the other way, then I reached the other drill bit. So, I should be able to just punch out the broken drill bit the other way right? Yeah right. Broke my punch. Tried pressing it out, bent the crap out of the pin I was using to press it out with. Ok, what else can go wrong? I gave up on that rivet, moved on to some smaller normal rivets. Now, normally, most rivets I have worked with, all you need to do is grind off the smashed side or any side for that matter, smack it a few times with a punch and it should pop right out. NOT YUGO RIVETS! At least not the ones in my kits. I tried getting the ones out on the trigger guard, ground them flat, even ground into the trigger guard metal. Beat on them with a punch, won't come out. Tried drilling through them, and then knocking them out. Still won't come out. I am out of ideas and patients.