I bought an ace stock for my Daewoo and I needed to replace the hammer, trigger and disconnector with the parts they supplied. I got the disconnector and the trigger in but I am having difficulty with the hammer. The pin that seats the hammer does not seem to want to go through the hole on the hammer (I checked the old hammer and it's the same- won't go through). Is there a trick to getting the pin back through the hole or do I need to exert a little more force. The pin came out very easy.
               Thanks

No problem. I was able to figure it out. Rotating the selector to semi allowed me to press down and align the trigger up properly. Whew! Next time it will be old hat.