User Panel
Posted: 6/6/2016 12:00:07 PM EDT
[Last Edit: maggiethecat]
ABSOLUTELY NO FOR SALE OR RENT!
Post the tools you will loan, or want to borrow here. Let's keep this thread about the tools only. I have an upper receiver block. Fits the Aero M5 upper. |
|
Three Boxes. First two are failing us.
|
|
|
Et Ego Enim Ferre Pament Charon
|
I have a Geissele barrel nut wrench, and a UTG barrel nut wrench that could be loaned out if needed.
I'm guessing nobody wants to borrow my 2 pieces of 2x4 blocking with rosin applied that has changed out like 10 barrels It's got a couple holes in it that greatly help when installing gas block pins, lower pins, etc. as well... Or my brass headed hammer I picked up for $1 at a garage sale... Or my Harbor Freight center punch with the tip ground down for starting roll pins... Or the old magazine I filled with epoxy that I use for a magazine vice block... Also, my single best purchase was the Kobalt Magnum grip pliers, they start roll pins and drive them 90% of the way in like a dream... I really am a ingenious, cheap, ass |
|
|
I have an upper receiver block (clamshell) to loan out.
PM me if needed. |
|
FNJ, FCC, FBHO
|
I know that there is no selling or renting tools.... But can we get deposits in case someone turns out to be a shit bag?
I've got an SWS barrel nut wrench. That's the Noveske quad rail / switch block barrel nut wrench. I'd be willing to loan it, but since it's such a pain in the ass / expensive I'd feel better about getting a paypal deposit that will be refunded to you when it's returned to me. |
|
|
Originally Posted By mbpike:
I know that there is no selling or renting tools.... But can we get deposits in case someone turns out to be a shit bag? I've got an SWS barrel nut wrench. That's the Noveske quad rail / switch block barrel nut wrench. I'd be willing to loan it, but since it's such a pain in the ass / expensive I'd feel better about getting a paypal deposit that will be refunded to you when it's returned to me. View Quote Seems fair. Perhaps even more "safe" a mod has a PayPal account as "escrow" for the tools. |
|
"My gun fight is going pretty bad if it involves anything but super soakers at a wet t shirt contest" -Aimless
|
I wouldn't mind seeing how you did the 2x4s. From one cheap ass to another. I'm always looking for a cheap alternative.
|
|
|
Does anyone have an 80% lower jig that they would be willing to loan to a Jarhead team member?
|
|
"When the pin is pulled, Mr. Grenade is not our friend."
"This ain't Dodge City, and you ain't Bill Hickock." |
Originally Posted By Elijah1:
Seems fair. Perhaps even more "safe" a mod has a PayPal account as "escrow" for the tools. View Quote View All Quotes View All Quotes Originally Posted By Elijah1:
Originally Posted By mbpike:
I know that there is no selling or renting tools.... But can we get deposits in case someone turns out to be a shit bag? I've got an SWS barrel nut wrench. That's the Noveske quad rail / switch block barrel nut wrench. I'd be willing to loan it, but since it's such a pain in the ass / expensive I'd feel better about getting a paypal deposit that will be refunded to you when it's returned to me. Seems fair. Perhaps even more "safe" a mod has a PayPal account as "escrow" for the tools. Paypal takes 3% off of each transaction. That's 6% you're going to pay to them as "insurance" fees, since you'll have to go two ways with it. |
|
|
Or you can gift it.... No fees either way.
|
|
|
If you send it as a friends or family, there is no fees involved, it is a free transaction each way.
|
|
|
Anyone have the receiver lapping tool?
|
|
"My gun fight is going pretty bad if it involves anything but super soakers at a wet t shirt contest" -Aimless
|
Does anyone have a carrier key staking tool?
|
|
Do you live in Louisiana? Did you know we have our own club house?
http://www.ar15.com/forums/t_8_58/528133_Where_Y_at_.html |
i need to borrow a A2 rear sight tool. expensive little tool to use once.
|
|
|
|
Originally Posted By nottooslow:
just bought it today. lmk if you need to borrow it. I just need to do the build I am working on first. ETA: still hasn't shipped from brownells yet, and I will have lapping compound for you to use. View Quote View All Quotes View All Quotes Originally Posted By nottooslow:
Originally Posted By Elijah1:
Anyone have the receiver lapping tool? just bought it today. lmk if you need to borrow it. I just need to do the build I am working on first. ETA: still hasn't shipped from brownells yet, and I will have lapping compound for you to use. I bought one too |
|
"My gun fight is going pretty bad if it involves anything but super soakers at a wet t shirt contest" -Aimless
|
Gyrene84, PM inbound.
I have an 80% Arms Easy Jig. |
|
|
Looking to borrow/rent a KAC URX 3.1 wrench.
|
|
|
I am embarking on my first build with a pristine Colt upper and a Larue barrel, and I would like to make sure that the upper is square. I would like to borrow a squaring mandrel if someone will be so kind.
Thank you. |
|
|
I'm looking to borrow a barrel extension wrench if anyone has one to loan out. I have a clamshell for the upper and lower action block to loan out if need be.
|
|
|
great idea for a thread!
|
|
|
any one have 5.56 go and no go gauges to loan first time builder.
|
|
|
Also we should probably consider laying out some groundwork for what is considered reasonable time to have the tools loaned out.
|
|
|
|
Originally Posted By oxbcat:
I have the dwilson URX barrel nut wrench that I used to install mine. I would ask for what it cost me for the tool, plus the cost of shipping it to you. I would then return the cost of the tool afterwards, unless the tool is severely damaged or broken. But I think that would go for any tool being loaned out in this thread. Also we should probably consider laying out some groundwork for what is considered reasonable time to have the tools loaned out. View Quote View All Quotes View All Quotes Originally Posted By oxbcat:
Originally Posted By davebl:
Looking to borrow/rent a KAC URX 3.1 wrench. I have the dwilson URX barrel nut wrench that I used to install mine. I would ask for what it cost me for the tool, plus the cost of shipping it to you. I would then return the cost of the tool afterwards, unless the tool is severely damaged or broken. But I think that would go for any tool being loaned out in this thread. Also we should probably consider laying out some groundwork for what is considered reasonable time to have the tools loaned out. Thanks but another arfcommer stepped up and all is well. |
|
|
Looking for a urx barrel nut wrench to borrow for about 10 minutes...friend of mine lost his....
|
|
|
|
I could use an Upper clamshell and a lapping tool as well, if someone doesn't mind me borrowing?
|
|
|
AAC Blackout flash hider socket anyone?
|
|
Have you donated to your local volunteer fire department lately?
|
Anyone have a urx wrench they can lend out?
|
|
|
Looking to rent 5.56 headspace gauges, go and no-go.
|
|
|
Inky who rides a Harley--- and has a Job... Dafuk
TN, USA
|
I need a front site bench block... Anybody have one they are using for the time being.
|
|
I'm looking to borrow either a clam shell or geissele reaction rod for dpms aero 308.
Many thanks. (just noticed the auto text changed geissele to griddle.....though i haven't received an offer for a griddle loan yet) |
|
|
Looking for urx tool in the Dayton,Ohio area.
|
|
|
Hi guys looking for a 9mm chamber reamer I know how to take care of them
I have 545x39 8mm mauser let me know also have a 223/300 go no go let me know the date today is nov30th I really need eve 9 reamer |
|
|
|
I shall subscribe - In case I spot someone semi-local or someone which needs a rather rare item no one else seems to have.
As a tradesman - machinist, LOAN is one of those four letter words not to be used in the work environment. As a firearms enthusiast, I like to see as many fellow shooters safely succeed in their efforts as possible. |
|
11-06-2012: All HOPE is lost, for there will be NO CHANGE.
And as the horde gazed over the edge into the abyss, they chanted FORWARD! FORWARD! |
Any one have a geselle reaction rod they'd mind loaning out? For 5.56 thanks
|
|
|
M923A2: shoot me a PM. we'll see if we can work something out (will need to be shipped so need to discuss details)
|
|
|
Does anyone have a magpul Bev block I could use and possibly an armorer's wrench?
|
|
|
Ordered some parts to build an upper for the first time that should arrive next week.
I would like to borrow a 5.56 Reaction Rod to install the ALG EMR and barrel onto a standard Aero stripped upper. I don't have PayPal but I will mail the cost of shipping back with the tool. I assume a regular Clamshell would work too. PM me if you have something available, thanks. |
|
|
I could use an electric carving knife for my case foam, in case anybody has one for the same purpose :)
|
|
|
Does anyone have a barrel dimple jig for gas blocks they wouldn't mind lending out? It would be much appreciated.
|
|
|
Does anyone have a Noveske NSR barrel nut wrench? Can't find one anywhere. Also if the same person has a go, no-go gauge for .223 wylde that would be fantastic. I could literally ship it back the day I received it. Also, if anyone knows of a company that makes a crowsfoot with 1/2 inch drive that is slim enough to be an alternative please let me know. Thanks to all!
|
|
|
looking for a 1"3/16 16tpi tap.
thanks. Justin |
|
|
"Hillary has experience, but it’s bad experience"
-Donald J Trump |
|
Anyone have an 80% AR15 jig that I can borrow? I can't justify spending the cash on a jig that I'll only use once.
Thank you, |
|
|
Looking for a URX wrench if anybody has one. Thanks!
|
|
|
Looking for a gas block dimple jig...anyone have one I can borrow?
|
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.