building a spr help.

AR-15 » Build It Yourself

AR Sponsor:

[ARCHIVED THREAD] - building a spr help.

Posted: 8/13/2005 1:33:12 PM EDT

I need help with the parts mostly. What uper where to get it what barrel and stuff like that. I want it to look like the 14th rifle down in this adco line up. adco line up
. Im haveing a problem finding the barrel and that handguard.

Posted: 8/13/2005 2:11:01 PM EDT

[#1]

semi-helpful email sent

Posted: 8/13/2005 3:17:34 PM EDT

[#2]

This one?

Posted: 8/13/2005 4:02:55 PM EDT

[#3]

Quoted:
This one?

www.besthdw.com/test/m700police.jpg

thats m700police's rifle

that rifle made me fall in love with the spr setup!

contact adco on it.

pri tube, arms spr rail, etc etc

Posted: 8/13/2005 9:06:47 PM EDT

[#4]

the barrel is what gets me never seen anything like that before it isnt stanless or blued.

Posted: 8/13/2005 9:14:24 PM EDT

[#5]

how long you think it is 20 inch or 18?

Posted: 8/13/2005 9:27:08 PM EDT

[#6]

Ok, Heres what i got so far on it.
On top of that scope that is a ARMS 22TRC tactical ring cap on top of the cap is a ARMS 22TRR Tactical Ring Rail.
Forarm is PRi Genlll Free Float Forarm.
The top rail is a ARMS SPR-PEQ-2-3
Barrel- Unknown
Front site- Unknown
Rear site- Unknown
Flash Hider- Unknown
Bipod- Harris most likely
Under forarm rail has a what im assumeing is a PRi 3in Forearm Rail
Scope- Unknown
Right side forarm another PRi 3in Forearm Rail

Might just be easyer to buy a varmit kit from model1sales.com

Posted: 8/13/2005 9:52:34 PM EDT

[#7]

Quoted:
the barrel is what gets me never seen anything like that before it isnt stanless or blued.

it is stainless but its bead blasted

Posted: 8/13/2005 9:58:08 PM EDT

[#8]

Quoted:
Ok, Heres what i got so far on it.
On top of that scope that is a ARMS 22TRC tactical ring cap on top of the cap is a ARMS 22TRR Tactical Ring Rail. yep
Forarm is PRi Genlll Free Float Forarm. pri is right not sure of the gen thing
The top rail is a ARMS SPR-PEQ-2-3 something like that
Barrel- Unknown spr profile barrel for sure by adco
Front site- Unknown pri front flip sight
Rear site- Unknown arms#40
Flash Hider- Unknown either ops inc or adco clone of the ops inc along with the collar behind it
Bipod- Harris most likely harris with arms mount
Under forarm rail has a what im assumeing is a PRi 3in Forearm Rail all of it is modular so add/remove what you want
Scope- Unknown leupold
Right side forarm another PRi 3in Forearm Rail

Might just be easyer to buy a varmit kit from model1sales.com there is no comparison in an form

contact steve@adco his shop is who put this together so he would be the best one to talk to and usually if you buy complete it comes out a little cheaper along with not having to buy tools to assemble it.

Posted: 8/13/2005 10:42:35 PM EDT

[#9]

Quoted:
how long you think it is 20 inch or 18?

Its 18"

Posted: 8/14/2005 3:27:12 PM EDT

[#10]

Is this a 30 cal rifle? On the ops web site the muzzel break is for a 30 cal.

Posted: 8/14/2005 3:35:20 PM EDT

[#11]

Quoted:
Is this a 30 cal rifle? On the ops web site the muzzel break is for a 30 cal.

Nope. It's 5.56/.223.

To answer a few other questions:

It's a PRI Gen III tube.
Ops makes brakes for multiple calibers.

ADCO has just about everything you need in stock to build this rifle.

Posted: 8/14/2005 6:44:38 PM EDT

[#12]

Quoted:
Quoted:
Is this a 30 cal rifle? On the ops web site the muzzel break is for a 30 cal.

Nope. It's 5.56/.223.

To answer a few other questions:

It's a PRI Gen III tube.
Ops makes brakes for multiple calibers.

ADCO has just about everything you need in stock to build this rifle.

+1

Posted: 8/14/2005 7:03:28 PM EDT

[#13]

Quoted:
Ok, Heres what i got so far on it.
On top of that scope that is a ARMS 22TRC tactical ring cap on top of the cap is a ARMS 22TRR Tactical Ring Rail.
Forarm is PRi Genlll Free Float Forarm.
The top rail is a ARMS SPR-PEQ-2-3
Barrel- Unknown
Front site- Unknown Bipod- Harris most likely
Under forarm rail has a what im assumeing is a PRi 3in Forearm Rail
Scope- Unknown
Right side forarm another PRi 3in Forearm Rail

Might just be easyer to buy a varmit kit from model1sales.com

Let me add a little to the above
Barrel- Unknown Probably a White Oak Armament SPR weight barrel/ Bead blasted stainless
Front site- Unknown PRI gas block front sight
Flash Hider- Unknown Adco Ops inc fake brake + fake supressor collar

Posted: 8/14/2005 7:06:23 PM EDT

[#14]

what i dont understand is you found the pic in bigbore's thread which is in "his" industry forum and you go here to ask what the rifle consist of.

why not just ask the one who built the upper?

Posted: 8/15/2005 1:30:02 AM EDT

[#15]

just not the front sight muzzel break the forarm is on back order.

Posted: 8/15/2005 7:23:21 AM EDT

[#16]

Everything you need to build a true SPR clone is here..

ADCO Custom Build page

If you want some tips to save some bucks e-mail me...I did not go the entire SPR route, but I came close...

Posted: 8/15/2005 4:15:14 PM EDT

[#17]

Quoted:
I need help with the parts mostly. What uper where to get it what barrel and stuff like that. I want it to look like the 14th rifle down in this adco line up. adco line up
. Im haveing a problem finding the barrel and that handguard.

I found and saved the specs for that SPR Clone. I am attempting to build something almost exactly like it, but the barrel will be KG Black. It is truly a sweet SPR! Here it is as quoted from M700Police's Post:

"Specs:
---------
Rock River Arms National Match Upper & Lower
White Oak Precision tuned 2 stage trigger
White Oak/CLE 18", 1/7 twist, SPR profile barrel - Bead blasted, fitted bolt with Crane O-ring
Adco faux SPR muzzle doohicky
PRI Gen III carbon float tube with full bottom rail
PRI flip up front sight
PRI M84 Gasbuster charging handle
ARMS #38 SPR-PEQ2-3 Swan Sleeve
ARMS #40L BUIS
ARMS #22 Med. scope rings
ARMS TRR & TRC
Sierra Precision Rifles grip
Tubb Speedlock recoil spring
Leupold Mk4 4.5-14x40 PR Long Range with mildots
Harris S-BRM Bipod with Pod-loc and Tanks knob
Knights Armament bipod adapter"
Specs Link

HTH

ETA: ADCO does have all these parts but some are on backorder; Fixed BUIS used

.

Posted: 8/16/2005 7:10:26 PM EDT

[#18]

+1 on ADCO having it all. I just completed an SPR build, exactly like the pic posted above. The only difference...I Duracoated the barrel in Matte Black for a more sinister appearance.

Posted: 8/17/2005 1:52:28 AM EDT

[#19]

Quoted:
+1 on ADCO having it all. I just completed an SPR build, exactly like the pic posted above. The only difference...I Duracoated the barrel in Matte Black for a more sinister appearance.

Cool. You should post pics here for further inspiration

.

Posted: 8/18/2005 6:20:18 AM EDT

[#20]

Sorry I didn't see this earlier, that is indeed my SPR. Guam50 got the specs posted though.....appreciated. Only difference is that it now wears a #40L not a #40 BUIS. Almost all the parts came from Adco, they built the rig and are HIGHLY recommended.

A pic in it's current form:

Posted: 8/18/2005 8:13:32 AM EDT

[#21]

Quoted:
Quoted:
+1 on ADCO having it all. I just completed an SPR build, exactly like the pic posted above. The only difference...I Duracoated the barrel in Matte Black for a more sinister appearance.

Cool. You should post pics here for further inspiration .

Yeah, I know. This may be my motivation to replace the digital camera I broke a few weeks ago.

Posted: 8/18/2005 12:30:20 PM EDT

[#22]

For some reason, I dunno why, I really, really, really like the look of SPR's like that of M700Police's... just a couple of curiosity questions... is there a real point or purpose to the full-length rail, if a person isn't going to put on night vision optics? I plan on having an extended rail, to be sure, just to get the darn scope out there far enough to be away from my face, but don't think I'll need *that* much rail :D

Also, that PRI tube is cool and all, but awful spendy. Anybody have pics of an SPR clone built using a YHM Customizable tube like this one:

TIA,

nuk

Posted: 8/18/2005 2:13:44 PM EDT

[#23]

Quoted:
Sorry I didn't see this earlier, that is indeed my SPR. Guam50 got the specs posted though.....appreciated. Only difference is that it now wears a #40L not a #40 BUIS. Almost all the parts came from Adco, they built the rig and are HIGHLY recommended.

A pic in it's current form:

img.photobucket.com/albums/v216/M700Police/Mk12Mod0/SPR_Side2_Sm1.jpg

M700Police,
That is probably one of the most sought after SPR builds. How am I doing so far

:

The A.R.M.S. SPR-MOD Swan Sleeve will be changed out to a PEQ2-3 and the change bucket is my BRD relief fund

.

Thanks for the inspiration.

Posted: 8/18/2005 2:40:31 PM EDT

[#24]

Looks like a great start! Two comments though about parts I see:

1. The Harris bipod you have appears to be a 9-13" correct? Will be too high for bench shooting. I hope that isn't your goal. Should work well for prone.

2. You may run into an eye relief issue (like I did) with that Leupold and the #40 BUIS. I was unable to have my optic far back enough on the rail to get a good cheekweld and still be far forward enough to allow the flip up cover to open and clear the BUIS. The #40L solved the problem.

Good luck with the build!

Posted: 8/18/2005 3:30:50 PM EDT

[#25]

Quoted:
Looks like a great start! Two comments though about parts I see:

1. The Harris bipod you have appears to be a 9-13" correct? Will be too high for bench shooting. I hope that isn't your goal. Should work well for prone.

2. You may run into an eye relief issue (like I did) with that Leupold and the #40 BUIS. I was unable to have my optic far back enough on the rail to get a good cheekweld and still be far forward enough to allow the flip up cover to open and clear the BUIS. The #40L solved the problem.

Good luck with the build!

1. Correct on the bipod, LM-S (photo-op thing). I have a BRM-S enroute.
2. I guess the #40 is going up for sale

.

Thanks for the tips. Really appreciated.

[ARCHIVED THREAD] - building a spr help.

AR-15 » Build It Yourself

AR Sponsor:

Warning

Confirm Action

About AR15.COM

Stay Connected

Newsletter

Contact Us