Do all Surefire E series lights have same diameter?

Will this mount fit an E2E?



Thanks

Quoted: Do all Surefire E series lights have same diameter?

Yes. They are 0.6" diameter

I don't know which mount you show a photo of.

SureFire's M78 Mount is intended for the E-Series.

Ak

Sorry bout that.

I want to mount a Surefire E2E Executive Elite with the mount shown, which is Vltor mount designed for "E" series lights.  But mine has a clip.  How do I remove the clip?  LOL sorry the dumb question, might as well ask it.

Quoted: How do I remove the clip?

1) unscrew bezel
2) remove SF123A's (in case they go flying)
3) carefully remove the o-ring (kinda roll it over and off the threads).
4) using paracord / bootlace etc, threaded in the "U" of the clip - pull/wiggle* the clip off the bezel-end (notice the threads are flat to allow this) while holding the battery tube.

*Notice there is a black plastic widget under the clip (to prevent the o-ring from squishing under it when the bezel is on tight) - this will go flying unless you are careful so watch out for it!

With the clip removed the widget can no longer be used so the o-ring will be able to afford the same level of weather resistance. You may find the weapon-mount you are using allows for SureFire's short pocketclip to be used. I'd say there was about an inch of body spare with the short clip installed.


I hope this helps?
Al