Will the Las/Tac laser hold up to the recoil of a shotgun?

What is a good mount for the Las/Tac?

LDI says "Yes".

Th VLTOR mount is the way to go for the Las/ Tac. I've tried several.

See Grant at www.gandrtactical.com

Tack

I see three VLTOR mounts.  Is it the classic, E, or G series?

Classic.

Once you get it (IF), you will want to protect the "T" handle that is used too tighten the mount down with a piece of leather, and then really crank it down with the assistance of some pliers. Also use a drop of "Blue" Lok Tite on the threads, and you'll be good to go. (I would give $10.00 for a specially designed wrench that woult fit that "T" handle to have in my Go bag.) I want to have the ability to take it on and off easier than needing pliers.

What we really need, is a 1" Flashlight Mount from LaRue that puts the light/ laser as low to the rail as the VLTOR does. We would then have the ability to really lock the 1" tube into the mount, and have 100% repeatability that La Rue Mounts is famous for.

ARMS and other throw lever mounts I have played with just do not return to 100% POI like LaRue, and in my opinion, this is needed for a laser sight that might be used for a very "Surgically Placed" shot.

YMMV

Tack

How long is the straight wire on the Las/Tac?

How is the 1-inch ring mount from LDI?

Would it be better to mount this on the handguards or on the front sight base?

What kind of mount is pictured, C4iGrant?

Thanks for the info.