User Panel
User Panel
User Panel
|
Posted: 4/7/2016 10:55:49 PM EDT
[#1]
I can do you a complete 16 inch upper with a bolt that will run on colt or glock mags with an 11 inch keymod forearm, a slick side flat top receiver, and a heavy extended length buffer for $699 plus shipping...and guarantee it to run. Shoot me an email....I won't be back in the shop till early next week....will be at Knob Creek all weekend.
Rudy Pic of one of my uppers on a QC10 lower.  " />
|
|
|
|
Posted: 4/7/2016 11:18:58 PM EDT
[#2]
Quote HistoryQuoted:
I can do you a complete 16 inch upper with a bolt that will run on colt or glock mags with an 11 inch keymod forearm, a slick side flat top receiver, and a heavy extended length buffer for $699 plus shipping...and guarantee it to run. Shoot me an email....I won't be back in the shop till early next week....will be at Knob Creek all weekend. Rudy Pic of one of my uppers on a QC10 lower. http://<a href=http://i368.photobucket.com/albums/oo121/MadMachinist/Ray%209mm_zpsjpzy7oam.jpg</a>" /> I'd do this. Rudy's stuff always works, and when people buy from other manufacturers Rudy is the guy that ends up fixing it. Save yourself the time and just go straight to Rudy. |
|
|
|
Posted: 4/8/2016 8:22:41 AM EDT
[#3]
I've always had good luck with RRA, but I never mix and match. I used all RRA parts (except mags) because I started with a RRA stripped lower.
If I was looking now, I'd use Rudy. If for no other reason than the input he adds to these boards. IMO, you can't beat the knowledge of the platform and the easy access for communication. |
|
|
|
Posted: 4/8/2016 10:34:23 AM EDT
[#4]
Quote HistoryQuoted:
I'd do this. Rudy's stuff always works, and when people buy from other manufacturers Rudy is the guy that ends up fixing it. Save yourself the time and just go straight to Rudy. Quote HistoryQuoted:
Quoted:
I can do you a complete 16 inch upper with a bolt that will run on colt or glock mags with an 11 inch keymod forearm, a slick side flat top receiver, and a heavy extended length buffer for $699 plus shipping...and guarantee it to run. Shoot me an email....I won't be back in the shop till early next week....will be at Knob Creek all weekend. Rudy Pic of one of my uppers on a QC10 lower. http://<a href=http://i368.photobucket.com/albums/oo121/MadMachinist/Ray%209mm_zpsjpzy7oam.jpg</a>" /> I'd do this. Rudy's stuff always works, and when people buy from other manufacturers Rudy is the guy that ends up fixing it. Save yourself the time and just go straight to Rudy. My complete upper from Rudy is in the ballpark of 1,500 rounds straight w/o malfunction, and never been cleaned so far. Now I'm just interested to see how long it'll go without cleaning til it jams |
|
|
|
Posted: 4/8/2016 12:17:45 PM EDT
[#5]
Take a look at JSE Surplus complete 9mm uppers also. I have one and runs great. No issues whatsoever.
|
|
|
|
Posted: 4/8/2016 12:25:27 PM EDT
[#6]
Quoted:
If you were buying for a drop in... CMMG http://stores.9mmar.com/cmmg-9mm-complete-upper-16-m4a3/ YHM http://yhm.net/entry-level-9mm-kit.html RRA http://stores.9mmar.com/rra-9mm-complete-upper-half/ Are these good quality uppers? Are There others, in the same price range ($5-750) that I should consider. Looking and really don't know that much about the 9 mm. Any help would greatly appreciated! I've got the stripped lower, the Hahn Dedicated mag well block, a lower parts kit. Have a spare carbine buffer tubee and spring, may need a spacer and heavier buffer. Any of those manufacturers are very good IMHO, I'd be hard pressed to say which is best. CMMG has a long history of 9mm gear, and I've never gotten anything bad from YHM, especially their 7.62x39 stuff. I went with a RRA, mostly for small reasons (RRA was available in a midlength and didn't have the M4 notch, had a FSB and was going on a RRA lower). Looks like CMMG & YHM already have ramped bolts, I'm assuming you've factored in the cost of having the RRA bolt ramped, unless RRA started doing that themselves. I got my RRA 9mm upper from Adco and had them ramp the bolt for me. |
|
|
|
Posted: 4/8/2016 1:22:27 PM EDT
[#7]
Quote HistoryQuoted: I can do you a complete 16 inch upper with a bolt that will run on colt or glock mags with an 11 inch keymod forearm, a slick side flat top receiver, and a heavy extended length buffer for $699 plus shipping...and guarantee it to run. Shoot me an email....I won't be back in the shop till early next week....will be at Knob Creek all weekend. Rudy Pic of one of my uppers on a QC10 lower. http://<a href=http://i368.photobucket.com/albums/oo121/MadMachinist/Ray%209mm_zpsjpzy7oam.jpg</a>" /> |
|
|
|
Posted: 4/10/2016 9:13:20 PM EDT
[#8]
Quote HistoryQuoted:
I can do you a complete 16 inch upper with a bolt that will run on colt or glock mags with an 11 inch keymod forearm, a slick side flat top receiver, and a heavy extended length buffer for $699 plus shipping...and guarantee it to run. Shoot me an email....I won't be back in the shop till early next week....will be at Knob Creek all weekend. Rudy Pic of one of my uppers on a QC10 lower. http://<a href=http://i368.photobucket.com/albums/oo121/MadMachinist/Ray%209mm_zpsjpzy7oam.jpg</a>" /> Well I was about to make a post asking "Let's say I just wanted to get all the stuff I need to make a 9mm AR from a lower I already have where would I go" and then I saw this thread and saw that was answered here. Email in bound man. |
|
|
|
Posted: 4/16/2016 8:09:27 AM EDT
[#9]
Get one with a 9mm upper. No forward assist, no hole in the front for a gas tube. Best Buy would be one from Mad Machinist.
|
|
|
|
Posted: 4/19/2016 1:47:12 AM EDT
[#10]
I bought a CMMG complete upper and have no problems related to the upper. Over 1000 through it, runs great.
|
|
|
|
Posted: 4/19/2016 1:51:09 AM EDT
[#11]
Quoted:
I can do you a complete 16 inch upper with a bolt that will run on colt or glock mags with an 11 inch keymod forearm, a slick side flat top receiver, and a heavy extended length buffer for $699 plus shipping...and guarantee it to run. Shoot me an email....I won't be back in the shop till early next week....will be at Knob Creek all weekend. Rudy Pic of one of my uppers on a QC10 lower. http://<a href=http://i368.photobucket.com/albums/oo121/MadMachinist/Ray%209mm_zpsjpzy7oam.jpg</a>" /> Where do you source your upper receivers? I have been looking for one with no FA or brass deflector but with the door hinge with no luck. do you happen to sell them by any chance? |
|
|
|
Posted: 4/19/2016 3:48:18 AM EDT
[#12]
Quote HistoryQuoted:Where do you source your upper receivers? I have been looking for one with no FA or brass deflector but with the door hinge with no luck. do you happen to sell them by any chance? I know Aero makes them with the brass deflector... http://www.primaryarms.com/aero-precision-slick-side-stripped-ar-15-upper-receiver-forged/p/kt-apar610401/ If you want one without the brass deflector nipple, I think it's Rock River Arms, Model 1 Sales(where I got mine), or find a used Colt. |
|
|
|
Posted: 4/19/2016 6:06:14 AM EDT
[#13]
Quote HistoryQuoted:
Where do you source your upper receivers? I have been looking for one with no FA or brass deflector but with the door hinge with no luck. do you happen to sell them by any chance? Quote HistoryQuoted:
Quoted:
I can do you a complete 16 inch upper with a bolt that will run on colt or glock mags with an 11 inch keymod forearm, a slick side flat top receiver, and a heavy extended length buffer for $699 plus shipping...and guarantee it to run. Shoot me an email....I won't be back in the shop till early next week....will be at Knob Creek all weekend. Rudy Pic of one of my uppers on a QC10 lower. http://<a href=http://i368.photobucket.com/albums/oo121/MadMachinist/Ray%209mm_zpsjpzy7oam.jpg</a>" /> Where do you source your upper receivers? I have been looking for one with no FA or brass deflector but with the door hinge with no luck. do you happen to sell them by any chance? These are the 'droids you're looking for 
I've used them on all my 9mm builds. Great guy to work with, too. |
|
|
|
Posted: 4/19/2016 11:57:06 AM EDT
[#14]
My 9mm upper Rudy built me for my QC10 glock mag lower has about 2500rds through it with no cleaning and is a favorite at the Ga HTF shoots when it gets oassed around. His stuff just works and he'll take care of you after the sale.
|
|
|
|
Posted: 4/19/2016 10:53:33 PM EDT
[#15]
Quote HistoryQuoted:
Where do you source your upper receivers? I have been looking for one with no FA or brass deflector but with the door hinge with no luck. do you happen to sell them by any chance? Quote HistoryQuoted:
Quoted:
I can do you a complete 16 inch upper with a bolt that will run on colt or glock mags with an 11 inch keymod forearm, a slick side flat top receiver, and a heavy extended length buffer for $699 plus shipping...and guarantee it to run. Shoot me an email....I won't be back in the shop till early next week....will be at Knob Creek all weekend. Rudy Pic of one of my uppers on a QC10 lower. http://<a href=http://i368.photobucket.com/albums/oo121/MadMachinist/Ray%209mm_zpsjpzy7oam.jpg</a>" /> Where do you source your upper receivers? I have been looking for one with no FA or brass deflector but with the door hinge with no luck. do you happen to sell them by any chance? Been using Aero precision but they have the deflector.....haven't been able to source a reliable supplier for a slicside with port door with no deflector....open to suggestions..... 
|
|
|
|
Posted: 4/19/2016 11:18:55 PM EDT
[#16]
Rudy... Anderson had some, but they are out. You might want to oontact them. I have four, and they all were working great.
|
|
|
|
Posted: 4/22/2016 9:55:14 PM EDT
[#17]
I'll give 'em a shout.....Thanks!! But we are working on getting another mill and making our own.....
|
|
|
|
Posted: 4/22/2016 11:21:35 PM EDT
[#18]
I would buy one
|
|
|
|
Posted: 4/22/2016 11:56:47 PM EDT
[#19]
Quote HistoryQuoted:
I can do you a complete 16 inch upper with a bolt that will run on colt or glock mags with an 11 inch keymod forearm, a slick side flat top receiver, and a heavy extended length buffer for $699 plus shipping...and guarantee it to run. Shoot me an email....I won't be back in the shop till early next week....will be at Knob Creek all weekend. Rudy Pic of one of my uppers on a QC10 lower. http://<a href=http://i368.photobucket.com/albums/oo121/MadMachinist/Ray%209mm_zpsjpzy7oam.jpg</a>" /> Can you IM me a quote for a complete 10.5" .40 cal upper? Thanks, Frank |
|
|
|
Posted: 4/24/2016 9:05:18 AM EDT
[#20]
Rudy. ......what 11" keymod rail are you using in the pic you posted at the top of this thread? Do you sell just the rail?
Thanks Roger |
|
|
|
Posted: 4/24/2016 9:58:09 PM EDT
[#21]
Quote HistoryQuoted: I can do you a complete 16 inch upper with a bolt that will run on colt or glock mags with an 11 inch keymod forearm, a slick side flat top receiver, and a heavy extended length buffer for $699 plus shipping...and guarantee it to run. Shoot me an email....I won't be back in the shop till early next week....will be at Knob Creek all weekend. Rudy Pic of one of my uppers on a QC10 lower. http://<a href=http://i368.photobucket.com/albums/oo121/MadMachinist/Ray%209mm_zpsjpzy7oam.jpg</a>" /> |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
