User Panel
User Panel
User Panel
|
Posted: 12/5/2013 6:37:48 AM EDT
They are finally here!! Our new AA powered Red Dot.
Single dot version $99.99 LINK OPTIONAL KILL FLASH AVAILABLE! Included mount offers Lower 1/3rd Co-Witness and lines up with our Standard magnifier mounts. You will have room on a flat-top AR-15 for optic and magnifier, Add optional cantilever spacer for use with a magnifier to allow room for optic, magnifier and rear flip. Weapons grade red dot sight Magnification: None Eye Relief: Unlimited 3 MOA Dot Optical coating: Anti-reflective Uses 1 standard AA battery 11 brightness settings Anodized aluminum body Length: 5.5-Inch Width: 2 1/2-Inch Height: 2 7/8-Inch w/mount. Weight: 12 1/8 oz w/mount Flip up caps included Mount height gives lower 1/3 co-witness 1 year repair or replacement warranty. Base is milled to accept cantilever spacer or aftermarket M4 mount 
LINK Multi Reticle Version $119.99 OPTIONAL KILL FLASH AVAILABLE! Included mount offers Lower 1/3rd Co-Witness and lines up with our Standard magnifier mounts. Add optional cantilever spacer option for use with a magnifier to allow room for optic, magnifier and rear flip. Weapons grade red dot sight Magnification: None Eye Relief: Unlimited 3 MOA Dot Optical coating: Anti-reflective Uses 1 standard AA battery 11 brightness settings Anodized aluminum body Length: 5.5-Inch Width: 2 1/2-Inch Height: 2 7/8-Inch w/mount. Weight: 12 1/8 oz w/mount Flip up caps included Mount height gives lower 1/3 co-witness 1 year repair or replacement warranty. Base is milled to accept cantilever spacer or aftermarket M4 mount There can be slight alignment differences between reticles. It is minimal but we recommend the single dot version for use with magnifiers. 
Both have a killflash and cantilever spacer option. only $19.99 each 
|
|
|
|
Posted: 12/5/2013 7:55:25 AM EDT
[#1]
Are some of the 11 brightness settings NV compatible?
|
|
|
|
Posted: 12/5/2013 9:48:58 AM EDT
[#2]
Quote HistoryQuoted:
Are some of the 11 brightness settings NV compatible? Setting one can be but we are not formally classifying these as NV compatible. |
|
|
|
Posted: 12/5/2013 11:10:45 AM EDT
[#3]
It looks bad ass. What is the battery life at the lowest, and highest powers?
|
|
|
|
Posted: 12/5/2013 12:48:34 PM EDT
[#4]
Quote HistoryQuoted:
It looks bad ass. What is the battery life at the lowest, and highest powers? We don't know yet. A prototype has been on a middle setting for several months. |
|
|
|
Posted: 12/5/2013 1:02:39 PM EDT
[#5]
They look good marsh!
|
|
|
|
Posted: 12/5/2013 2:42:33 PM EDT
[#6]
Very nice.
|
|
|
|
Posted: 12/5/2013 2:50:53 PM EDT
[#7]
My order is in shipping
|
|
|
|
Posted: 12/5/2013 2:56:13 PM EDT
[#8]
Damn it MARSH! Stop trying to make me poor!
Just got my second order from you in 2 weeks. I refuse to buy again! oh wait.... payday is next friday see you then. |
|
|
|
Posted: 12/5/2013 4:51:40 PM EDT
[#9]
what are our options to get absolute co witness and not lower 1/3?
|
|
|
|
Posted: 12/5/2013 5:37:55 PM EDT
[#10]
Quote HistoryQuoted:
what are our options to get absolute co witness and not lower 1/3? LaRue LT659-NV |
|
|
|
Posted: 12/5/2013 6:42:39 PM EDT
[#11]
Time to buy
|
|
|
|
Posted: 12/5/2013 9:13:04 PM EDT
[#12]
If I didn't love the PA micro dot I already had I would buy this new one. Great work.
|
|
|
|
Posted: 12/5/2013 9:52:16 PM EDT
[#13]
Nice red dot
|
|
|
|
Posted: 12/6/2013 11:44:18 AM EDT
[#14]
Quote HistoryQuoted:
LaRue LT659-NV Quote HistoryQuoted:
Quoted:
what are our options to get absolute co witness and not lower 1/3? LaRue LT659-NV with the LaRue mount will it still line up with your guys' magnifiers? |
|
|
|
Posted: 12/6/2013 12:24:25 PM EDT
[#15]
Quote HistoryQuoted:
with the LaRue mount will it still line up with your guys' magnifiers? Quote HistoryQuoted:
Quoted:
Quoted:
what are our options to get absolute co witness and not lower 1/3? LaRue LT659-NV with the LaRue mount will it still line up with your guys' magnifiers? That is the low LaRue mount. Our standard height flip will be a little higher but work fine. The magnifier has internal adjustments to compensate. |
|
|
|
Posted: 12/7/2013 3:53:25 AM EDT
[#16]
Any other options for absolute co witness mounts for future sales or drop down option Marsh? Or is it safe to say that if it fits the Comp M4 it'll fit this. It looks great BTW.
|
|
|
|
Posted: 12/7/2013 5:15:53 AM EDT
[#17]
Quote HistoryQuoted:
Any other options for absolute co witness mounts for future sales or drop down option Marsh? Or is it safe to say that if it fits the Comp M4 it'll fit this. It looks great BTW. We will add the ADM M4 mounts as soon as we get more of them in. That said the slightly higher lower 1/3 is much more popular with full size rd dots like the Aimpoint Pro and M4. There is much confusion about CW. The dot and the irons line up with lower 1/3. If you really wany absolute LaRue makes a nice one. If you look at their site they came out with it to line up with lower mounted Night Vision but it give absolute CW. LT649-NV |
|
|
|
Posted: 12/7/2013 10:51:26 AM EDT
[#18]
Hows the battery life?
|
|
|
|
Posted: 12/7/2013 11:01:05 AM EDT
[#19]
Quote HistoryQuoted:
Hows the battery life? Quote HistoryQuoted:
Hows the battery life? Quoted:
Quoted:
It looks bad ass. What is the battery life at the lowest, and highest powers? We don't know yet. A prototype has been on a middle setting for several months. |
|
|
|
Posted: 12/7/2013 2:39:07 PM EDT
[#20]
Ah, mybad
 Thanks
|
|
|
|
Posted: 12/8/2013 2:13:32 AM EDT
[#21]
Quote HistoryQuoted:
We will add the ADM M4 mounts as soon as we get more of them in. That said the slightly higher lower 1/3 is much more popular with full size rd dots like the Aimpoint Pro and M4. There is much confusion about CW. The dot and the irons line up with lower 1/3. If you really wany absolute LaRue makes a nice one. If you look at their site they came out with it to line up with lower mounted Night Vision but it give absolute CW. LT649-NV Quote HistoryQuoted:
Quoted:
Any other options for absolute co witness mounts for future sales or drop down option Marsh? Or is it safe to say that if it fits the Comp M4 it'll fit this. It looks great BTW. We will add the ADM M4 mounts as soon as we get more of them in. That said the slightly higher lower 1/3 is much more popular with full size rd dots like the Aimpoint Pro and M4. There is much confusion about CW. The dot and the irons line up with lower 1/3. If you really wany absolute LaRue makes a nice one. If you look at their site they came out with it to line up with lower mounted Night Vision but it give absolute CW. LT649-NV Marsh thank you for your reply. I agree there's not much a difference since the sights will cowitness just in the lower 1/3. I personally am one for consistency same cheek weld and line of sight as when using BUIS even in cqb situations. Looking forward to getting my hands on one thank you! |
|
|
|
Posted: 12/9/2013 2:05:28 PM EDT
[#22]
i orderedd one of multi's do you rate them higher than a 223?
|
|
|
|
Posted: 12/9/2013 2:31:13 PM EDT
[#23]
Quote HistoryQuoted:
i orderedd one of multi's do you rate them higher than a 223? .308 is fine |
|
|
|
Posted: 12/9/2013 3:27:32 PM EDT
[#24]
and any idea when you might get some ADM qd's in?
|
|
|
|
Posted: 12/9/2013 3:36:43 PM EDT
[#25]
Quote HistoryQuoted:
and any idea when you might get some ADM qd's in? I will find out in the morning!!! |
|
|
|
Posted: 12/10/2013 6:14:25 AM EDT
[#26]
Quote HistoryQuoted:
and any idea when you might get some ADM qd's in? Should be here early next week. |
|
|
|
Posted: 12/10/2013 1:21:13 PM EDT
[#27]
People keep asking but I have not seen an answer yet. BATTERY LIFE. Anyone know? I am interested in buying one to try out but will not until I know what kind of battery life this has left on 24/7 on a medium setting.
|
|
|
|
Posted: 12/10/2013 1:52:42 PM EDT
[#28]
Quote HistoryQuoted:
People keep asking but I have not seen an answer yet. BATTERY LIFE. Anyone know? I am interested in buying one to try out but will not until I know what kind of battery life this has left on 24/7 on a medium setting. I have posted in this thread and several others that I don't know for sure becasue the prototype that has been on for months is still going strong. If the goal is a home defense optic to be left on continuously then you know my answer. Aimpoint |
|
|
|
Posted: 12/11/2013 6:19:46 AM EDT
[#29]
How about putting this on my crossbow? What do you think???
|
|
|
|
Posted: 12/11/2013 11:52:00 AM EDT
[#30]
got mine today its built like a tank. I didnt think it would be so big but it is huge compared to the m3 clone.
it most definately is a keper, the dot and other reticles are clear and bright. got the kill flash screwed in, I ordered a spacer .i might have overlooked it or used to the M3 clone but no tools were included to change the mount if you ran offsets with a magnifier the base on this is to big you have to attach it front of the upper. if you are worried about battery life well you can check here every month I am sure marsh will let you know when it goes out so if it has run for 3 months allready well plan accordingly. so far by holding it and looking at it it is a great durable optic. might recommend that in one of the pictures you put something so someone could guess the size since it is alot bigger than it seems also to make it cheaper why not go back to the plain packaging? Quoted:
How about putting this on my crossbow? What do you think??? you are better off with a micro |
|
|
|
Posted: 12/13/2013 8:32:31 AM EDT
[#31]
Ordered Last night, Looking forward to getting it on and putting some rounds downrange with it.
Any pics with it mounted on a rifle yet? |
|
|
|
Posted: 12/13/2013 10:43:07 AM EDT
[#32]
http://www.ar15.com/forums/t_2_325/202771_How_about_a_pic_and_comment_thread_for_the_AA_powered_red_dots.html&page=4
I had a magnifier mounted behind it in my pics but I took those off. I am saving up for a ADM co witness mount. but i have to wait now since my CC was compromised Marsh finally got them in stock too |
|
|
|
Posted: 12/14/2013 7:23:04 PM EDT
[#33]
If you look from the front toward the shooter can you see the dot like airsoft chinese junk? Where is it made? USA? |
|
|
|
Posted: 12/14/2013 9:06:13 PM EDT
[#34]
Quote HistoryQuoted:
If you look from the front toward the shooter can you see the dot like airsoft chinese junk? Where is it made? USA? Guess you never looked at an Aimpoint from the front |
|
|
|
Posted: 12/15/2013 8:06:15 AM EDT
[#35]
Quote HistoryQuoted:
Guess you never looked at an Aimpoint from the front Quote HistoryQuoted:
Quoted:
If you look from the front toward the shooter can you see the dot like airsoft chinese junk? Where is it made? USA? Guess you never looked at an Aimpoint from the front This. Both my PA micro dot and Aimpoint T-1 are slighty (to bright for ambient lighting and only pinhead size) visible from the front. Neither of those are made in the USA. My Leupold DeltaPoint is made in the USA and its LED is visible from the front as well. |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
