User Panel
User Panel
User Panel
|
Posted: 5/5/2021 8:37:41 AM EDT
[#1]
Ok, thank you! Where would I want to put these in for sale to sell them?
|
|
|
|
TN, USA
|
Posted: 5/6/2021 8:42:40 AM EDT
[#2]
Quote HistoryOriginally Posted By tal35: Ok, thank you! Where would I want to put these in for sale to sell them? You could put on EE. Be sure and put "retro" in title of ad. Nice stuff |
|
|
|
Posted: 5/6/2021 10:00:17 AM EDT
[#3]
I did list in the EE section.
|
|
|
|
|
Posted: 5/11/2021 2:43:19 AM EDT
[#4]
What is this one worth?
 
|
|
|
|
|
Posted: 5/11/2021 8:42:26 AM EDT
[#5]
Quote HistoryOriginally Posted By BILLBO: What is this one worth? https://i.imgur.com/dEPNXAn.jpg https://i.imgur.com/iZt9IMq.jpg In that condition, retail is about $25 on the low end, and $40 on the high end. |
|
|
|
MI, USA
|
Posted: 5/12/2021 4:05:29 PM EDT
[Last Edit: Cjwsz68]
[#6]
See below
|
|
|
MI, USA
|
Posted: 5/12/2021 4:16:07 PM EDT
[Last Edit: Cjwsz68]
[#7]
See below
|
|
|
MI, USA
|
Posted: 5/12/2021 4:33:38 PM EDT
[Last Edit: Cjwsz68]
[#8]
Last attempt to post pictures
Here are pictures of my 1967 SP1 plus copies of the covers of the 1967 brochure that came with the gun, a 1964 Guns magazine and 1964 Shooting Times magazine with articles introducing the AR-15 that prompted my father to purchase the gun. Any ideas on the value for the complete set?                           
|
|
|
MI, USA
|
Posted: 5/13/2021 11:57:20 AM EDT
[Last Edit: Cjwsz68]
[#9]
see above
|
|
|
ID, USA
|
Posted: 5/19/2021 7:18:22 PM EDT
[Last Edit: Falfreak]
[#10]
I ran across a square forge 603 upper that is beat up and re-arsenaled ion black paint. It also has an MP barrel with a mediocre bore, some shine, some me light pitting visible. No “12” biddable buy the muzzle. Flat slip ring and A2 handgaurds. I’m guessing it was re-arsenaled and continued to see use. Any idea what it’s worth?
|
|
|
|
Posted: 6/6/2021 10:20:27 PM EDT
[#11]
What about a Colt LE6922 upper? It's the rarer version of the 6920. Same basic specs except for the barrel twist of 1/9 instead of 1/7 M4 profiled not Hbar. It has a low round count and complete with bcg and charging handle. All parts correctly marked as Colt since it's factory. C Alcoa Forge receiver, 2/00 barrel dating everything is supposed to be C marked including the bolt carrier group all C marked.
|
|
|
|
|
Posted: 6/7/2021 1:10:14 AM EDT
[#12]
Quote HistoryOriginally Posted By BILLBO: What about a Colt LE6922 upper? It's the rarer version of the 6920. Same basic specs except for the barrel twist of 1/9 instead of 1/7 M4 profiled not Hbar. It has a low round count and complete with bcg and charging handle. All parts correctly marked as Colt since it's factory. C Alcoa Forge receiver, 2/00 barrel dating everything is supposed to be C marked including the bolt carrier group all C marked. The problem with them is lack of info out there on them and just the twist rate being different. They do come up and bring $600-$750 range with BCG |
|
|
|
|
Posted: 6/25/2021 4:43:55 PM EDT
[#13]
Anyone have any idea was a new FNMI A1 1/7 twist barrel would go for? Still has the wick in it.
What about an FN Split A A2 upper? Looks new as well, but has storage marks. |
|
|
|
TX, USA
|
Posted: 7/3/2021 6:21:49 PM EDT
[#14]
Hello, I have Colt SP1 AR15. Here are some pictures of it.
     Thank you in advance. |
|
|
|
Posted: 7/29/2021 12:22:27 PM EDT
[#15]
I have a MINT, all original XM177E2 parts kit that all came together from the same rifle. Everything is here including the C MP C barrel, but the moderator and receiver are of course not included. I had no intention of ever selling it, but someone I know has something that I REALLY want, and he wants this kit as partial trade. I am trying to remember what the last original kit sold for on Gun Broker but I cannot remember. Does anyone know? Thanks.
|
|
|
|
|
Posted: 7/29/2021 2:00:08 PM EDT
[#16]
Quote HistoryOriginally Posted By M16indiana: I have a MINT, all original XM177E2 parts kit that all came together from the same rifle. Everything is here including the C MP C barrel, but the moderator and receiver are of course not included. I had no intention of ever selling it, but someone I know has something that I REALLY want, and he wants this kit as partial trade. I am trying to remember what the last original kit sold for on Gun Broker but I cannot remember. Does anyone know? Thanks. The last E2 upper that sold was about $1500-$1700 range so id say a complete minty kit would be $2500-$3000 range on the high end for a trade |
|
|
|
|
Posted: 7/29/2021 3:15:08 PM EDT
[#17]
Quote HistoryOriginally Posted By aeyoung: The last E2 upper that sold was about $1500-$1700 range so id say a complete minty kit would be $2500-$3000 range on the high end for a trade Thanks Alex. I was thinking the last complete kit I saw sell was $3000, but I was not sure. Now it turns out that his “original” FG42 scope mount MIGHT be a reproduction, so I have to do more research, where there are not many research sources. |
|
|
|
LA, USA
|
Posted: 8/5/2021 12:32:16 PM EDT
[#18]
NYPD gun collectors (and there are a lot of them, many retirees that move to free states) will kill for that upper. There is a cult following of NY1 revolvers and the like, even NY2 Glocks.You would be well served to advertise 6922 it on the Smith & Wesson collector forum.
|
|
|
PA, USA
|
Posted: 9/18/2021 9:18:19 PM EDT
[#19]
Was cleaning my misc pile of parts and found an old Colt M16a1 barrel. It's a 20" marked C MP B, has a C marked FSB, bird cage flash hider, appears to be near exc condition with a nice looking bore. Any idea on value or if the retro guys would be interested? Assuming it'd a 1/12 twist bbl.
Thanks! |
|
|
|
Posted: 9/19/2021 1:37:57 PM EDT
[#20]
Quote HistoryOriginally Posted By lwk5150: Was cleaning my misc pile of parts and found an old Colt M16a1 barrel. It's a 20" marked C MP B, has a C marked FSB, bird cage flash hider, appears to be near exc condition with a nice looking bore. Any idea on value or if the retro guys would be interested? Assuming it'd a 1/12 twist bbl. Thanks! 1972-‘74 Colt barrel, chrome chamber and bore, 1/12 twist. Market is a little silly right now so could fetch anywhere from $400-$800. |
|
|
|
PA, USA
|
Posted: 9/19/2021 1:52:20 PM EDT
[Last Edit: lwk5150]
[#21]
Thanks so much for the info. I’ll get some pics and put it up on the EE for the retro guys.
|
|
|
NH, USA
|
Posted: 9/20/2021 8:25:50 PM EDT
[#22]
Quote HistoryOriginally Posted By lwk5150: Thanks so much for the info. I’ll get some pics and put it up on the EE for the retro guys. Bear in mind you'll likely sit on that barrel a long time trying to sell it for 800.00 in the EE. If you need to get top dollar your best bet is Gunbroker and patience otherwise somewhere in the 550.00 is more reasonable to educated buyers looking for a decent deal. |
|
|
PA, USA
|
Posted: 9/21/2021 1:49:00 PM EDT
[#23]
Quote HistoryOriginally Posted By HipSh0T: Bear in mind you'll likely sit on that barrel a long time trying to sell it for 800.00 in the EE. If you need to get top dollar your best bet is Gunbroker and patience otherwise somewhere in the 550.00 is more reasonable to educated buyers looking for a decent deal. I'm not looking for top dollar - I'd like to get some cash towards a project I'm working on and figure I can pass this along to someone who appreciates what it is. I have it on the EE but there's definitely some wiggle room in my asking price. |
|
|
VA, USA
|
Posted: 9/22/2021 11:50:07 AM EDT
[#24]
I have a bunch of old uppers I bought 20+ years ago. Can you guys take a look and give me some idea what these are worth?
I have a prototype LMG upper with a massive barrel and M60 bipod. I can't find any markings on the barrel. I was told it came from a Colt engineer. A barrel with just a "12" stamped in it. Some 11.5 and 14.5" uppers. I don't know if these are Colt or other makers. I am out of touch on these things. uppers are in different folders on this link Thanks |
|
|
|
Posted: 9/22/2021 1:51:39 PM EDT
[#25]
Quote HistoryOriginally Posted By Ken_in_Va: I have a bunch of old uppers I bought 20+ years ago. Can you guys take a look and give me some idea what these are worth? I have a prototype LMG upper with a massive barrel and M60 bipod. I can't find any markings on the barrel. I was told it came from a Colt engineer. A barrel with just a "12" stamped in it. Some 11.5 and 14.5" uppers. I don't know if these are Colt or other makers. I am out of touch on these things. uppers are in different folders on this link Thanks Sent an email for more details on the lmg |
|
|
|
CA, USA
|
Posted: 10/4/2021 6:59:24 PM EDT
[#26]
Whats a good price for M12 M16 racks? The gun Shop I work part time at has two.
 
|
|
|
|
Posted: 10/5/2021 12:57:16 PM EDT
[#27]
Quote HistoryOriginally Posted By imarangemaster: Whats a good price for M12 M16 racks? The gun Shop I work part time at has two. https://i.imgur.com/NR8rY5j.jpg https://i.imgur.com/fg2igpi.jpg If you look around you can find them for <$100. But around $100 is a fair ballpark. Sometimes they fetch $250+. Depends on where you find them. |
|
|
|
MA, USA
|
Posted: 10/6/2021 9:36:58 PM EDT
[#28]
I picked up in trade a 20" 1:12 M16A1 Sako chrome lined pencil barrel. Marked: SAK PM CHROME BORE. Has barrel nut, triangle hand guard retainer, FSB looks like never been removed.
Barrel looks unfired, no makrs on the fee ramp or carbon marks at the muzzle. Maybe never installed, no grease on the treads or marks on barrel nut teeth or extension/barrel nut contact surface. Any idea on the value? |
|
|
|
Posted: 10/7/2021 1:20:31 AM EDT
[#29]
Quote HistoryOriginally Posted By Mad_Russian: I picked up in trade a 20" 1:12 M16A1 Sako chrome lined pencil barrel. Marked: SAK PM CHROME BORE. Has barrel nut, triangle hand guard retainer, FSB looks like never been removed. Barrel looks unfired, no makrs on the fee ramp or carbon marks at the muzzle. Maybe never installed, no grease on the treads or marks on barrel nut teeth or extension/barrel nut contact surface. Any idea on the value? I'd say you'll realistically be able to get rid of it for between 400.00 and 500.00 and if you put it on Gunbroker and are very patient possibly 500.00 to 600.00. Panic prices are coming down but I expect the retro stuff to stay close to the panic prices and be come the new baseline especially for things like barrels, bcgs, etc. |
|
|
|
FL, USA
|
Posted: 10/15/2021 9:46:26 PM EDT
[#30]
Hi all. Recent medical costs have seriously affected my family so I'm trying to sell off some stuff. These are all parts I aquired with the intention to build a retro rifle.
I have a Colt M16A1 complete upper, A1 grip, buffer tube with spring and buffer and complete buttstock I am considering putting up for sale. The upper is complete and all colt. Dark gray finish. C H forge marked upper receiver, C MP B marked barrel, 1/12 twist, shiny bore, C marked bolt carrier assembly without step, Colt charging handle and L R marked drain hole handguards. All other parts like sights, swivel, etc there. The buffer tube is Colt, spring and buffer came together and buffer has the reddish bumper on the end. A1 grip is Colt as well. I'd say all parts are in good condition with wear of course. Barrel was faced and recrowned at 11° by Adco. I have shot the upper and it shoots well at 100 yds. No keyholes with 55 grain. I am considering selling the upper and other parts together for someone who wants to build a retro rifle. I could put together the rest of the parts to make it a complete parts kit but I wouldn't be sure if all the small parts were Colt. I also have a neutered M16A1 FCG (converted to AR15 spec per ATF guidelines) but even then I'm not sure about selling something like that. I bought the FCG already neutered fir more authenticity but still being legal. Also, I have a Colt 604 upper receiver I'm thinking about selling too. Rear sight and port door, no forge mark, no forward assist. rebated front lug. In good condition with normal wear on finish. Just looking for opinions on what these may be worth and if trying to put together a complete parts kit would be worth it. I dont know what a fair asking price is. Thanks! |
|
|
|
Posted: 11/4/2021 2:54:42 PM EDT
[Last Edit: HipSh0T]
[#31]
I've got a few sets of 6 hole Carbine HG's new in sealed plastic bags, white sticker reads:
1005011343629 1005-01-134-3629 PN 9349059 1 EA DAAE20-00-C-0033 04/99 There's numbers molded into the HG's "119514604", I used a set on an IDF build but don't know much about them. Does anyone know who makes them or an approximate value per set? I have 2 sealed in bags with labels and 2 sets new with tags attached. Thanks |
|
|
|
|
Posted: 11/4/2021 6:56:55 PM EDT
[#32]
Quote HistoryOriginally Posted By HipSh0T: I've got a few sets of 6 hole Carbine HG's new in sealed plastic bags, white sticker reads: 1005011343629 1005-01-134-3629 PN 9349059 1 EA DAAE20-00-C-0033 04/99 There's numbers molded into the HG's "119514604", I used a set on an IDF build but don't know much about them. Does anyone know who makes them or an approximate value per set? I have 2 sealed in bags with labels and 2 sets new with tags attached. Thanks @HipSh0T - if you haven't seen it already, I found this thread in the archives. https://www.ar15.com/forums/ar-15/CAR_15_HANGUARDS_WITH_NUMBERS________________/123-430115/ |
|
|
|
|
Posted: 11/4/2021 11:19:56 PM EDT
[#33]
Quote HistoryOriginally Posted By grondike: @HipSh0T - if you haven't seen it already, I found this thread in the archives. https://www.ar15.com/forums/ar-15/CAR_15_HANGUARDS_WITH_NUMBERS________________/123-430115/ No, haven't seen that thread before so it appears they are IDF contractor handgaurds, wonder what they are worth per set as much as Colt 6 holes? |
|
|
|
|
Posted: 11/7/2021 4:39:01 PM EDT
[#34]
Can anyone give me an idea on what the value is on this? As the picture shows, it's a Leupold Mark 4 LR/T 3.5-10x40mm with the KAC mount. 100% clone correct for someone building a M110 clone. It's never been mounted.
|
|
|
|
|
Posted: 12/5/2021 1:55:44 PM EDT
[#35]
Hi, I'm looking for an estimate on what these are worth. Thanks.
These could be sold as is, or separated into barrels only and receivers only. 1. 20” barrel marked MP 12, Smooth Forged FSB without Drain Hole, uncoated Sling Swivel, A1 Flash Hider, Flat Slip Ring, Gas Tube, Black Handguards. ? Stripped 604 Square Upper with rebated notch under ejection port door. ? No charging handle, bolt carrier, and bolt. 2. 20” barrel marked MP C, Forged FSB with Drain Hole, coated Sling Swivel, A1 Flash Hider, Flat Slip Ring, Gas Tube, Black Handguards. ? Complete 603 Upper. ? Charging Handle, Parkerized “C” Bolt Carrier and Bolt. 3. 20” barrel marked C MP C, Smooth Forged FSB with Drain Hole, coated Sling Swivel, A1 Flash Hider, Flat Slip Ring, Gas Tube, Black Handguards. ? Complete 604 Round Upper. ? No charging handle, bolt carrier, or bolt. 4. 20” barrel marked C MP C, SmoothForged FSB with Drain Hole, coated Sling Swivel, A1 Flash Hider, Flat Slip Ring, Gas Tube, Black Handguards. ? Complete 604 Round Upper. ? Charging Handle, Parkerized Bolt Carrier and Bolt. 5. 20” barrel marked C MP C, Smooth Forged FSB with Drain Hole, coated Sling Swivel, 3-Prong Flash Hider, no Slip Ring, Gas Tube, or Handguards. ? Partial 603 “C H” Upper with Rear Sight parts but no Forward Assist parts or Ejection Port Door parts.? No charging handle, bolt carrier, and bolt. 6. 20” barrel marked C MP B, Forged FSB with Drain Hole, coated Sling Swivel, A1 Flash Hider, Flat Slip Ring, Gas Tube, Black Handguards. ? Complete 603 “C H” Upper. ? Charging Handle, Parkerized Bolt Carrier and Bolt  Attached File |
|
|
|
|
Posted: 12/5/2021 2:07:58 PM EDT
[#37]
Quote HistoryOriginally Posted By Veltro: Hi, I'm looking for an estimate on what these are worth. Thanks. These could be sold as is, or separated into barrels only and receivers only. 1. 20” barrel marked MP 12, Smooth Forged FSB without Drain Hole, uncoated Sling Swivel, A1 Flash Hider, Flat Slip Ring, Gas Tube, Black Handguards. ? Stripped 604 Square Upper with rebated notch under ejection port door. ? No charging handle, bolt carrier, and bolt. 2. 20” barrel marked MP C, Forged FSB with Drain Hole, coated Sling Swivel, A1 Flash Hider, Flat Slip Ring, Gas Tube, Black Handguards. ? Complete 603 Upper. ? Charging Handle, Parkerized “C” Bolt Carrier and Bolt. 3. 20” barrel marked C MP C, Smooth Forged FSB with Drain Hole, coated Sling Swivel, A1 Flash Hider, Flat Slip Ring, Gas Tube, Black Handguards. ? Complete 604 Round Upper. ? No charging handle, bolt carrier, or bolt. 4. 20” barrel marked C MP C, SmoothForged FSB with Drain Hole, coated Sling Swivel, A1 Flash Hider, Flat Slip Ring, Gas Tube, Black Handguards. ? Complete 604 Round Upper. ? Charging Handle, Parkerized Bolt Carrier and Bolt. 5. 20” barrel marked C MP C, Smooth Forged FSB with Drain Hole, coated Sling Swivel, 3-Prong Flash Hider, no Slip Ring, Gas Tube, or Handguards. ? Partial 603 “C H” Upper with Rear Sight parts but no Forward Assist parts or Ejection Port Door parts.? No charging handle, bolt carrier, and bolt. 6. 20” barrel marked C MP B, Forged FSB with Drain Hole, coated Sling Swivel, A1 Flash Hider, Flat Slip Ring, Gas Tube, Black Handguards. ? Complete 603 “C H” Upper. ? Charging Handle, Parkerized Bolt Carrier and Bolt https://www.ar15.com/media/mediaFiles/276452/tempImagenDpfD4_jpg-2193145.JPG In my opinion, on average about $600 to $1,000 each. The problem is they are "parts" because they have no lower receiver to make them collectible firearms. It will take a little time to sell them at these price points. |
|
|
|
USA
|
Posted: 12/10/2021 12:59:06 PM EDT
[#38]
I have a few original AR15/M16 Colt chrome bolts in excellent or better condition. Any idea on the going price for these?
|
|
|
|
Posted: 12/10/2021 2:45:25 PM EDT
[Last Edit: HipSh0T]
[#39]
Quote HistoryOriginally Posted By AKARS: I have a few original AR15/M16 Colt chrome bolts in excellent or better condition. Any idea on the going price for these? I sold a couple this year for $100.00 each, but I've had them for years and paid very little. |
|
|
|
|
Posted: 12/20/2021 12:20:47 PM EDT
[Last Edit: PGT_0673]
[#40]
I've got this 604(?) upper on a Brownell's XM16E1 lower. What do you think the value on the upper alone is? I'll have to pull it off and check the BCG and CH....not sure if original or later stuff (this has been on the rack awhile and I forgot about it). More pics in album.
      https://imgur.com/a/KSoJnaI |
|
|
|
NC, USA
|
Posted: 12/20/2021 9:46:16 PM EDT
[#41]
What seems to be the general consensus on value for a GM Hydramatic M16A1 demil receiver?
Very good condition, no crushing, cut back near selector. |
|
|
GA, USA
|
Posted: 1/12/2022 6:55:41 PM EDT
[#42]
C MP C marked stripped barrel, probably 85% condition, probably clean up better.
What’s it worth? Thanks |
|
|
NH, USA
|
Posted: 1/29/2022 2:58:10 PM EDT
[#43]
I have a new old stock Colt 20" C MP B barrel with the wick still in it. The barrel is complete with the FSB, front sight, sling swivel and slip ring installed. Separately there is an A1 flash hider. Does anyone have an idea of what it is worth?
Thanks! |
|
|
|
Posted: 1/29/2022 5:07:18 PM EDT
[#44]
Quote HistoryOriginally Posted By Gary7575: I have a new old stock Colt 20" C MP B barrel with the wick still in it. The barrel is complete with the FSB, front sight, sling swivel and slip ring installed. Separately there is an A1 flash hider. Does anyone have an idea of what it is worth? Thanks! If it is NOS like you say, I can see this barrel selling for $850.00 + on an auction site like Gunbroker or $600.00+ quick sale |
|
|
|
AR, USA
|
Posted: 2/12/2022 10:28:04 PM EDT
[Last Edit: ohtreethirtyone]
[#45]
I have 6 FSP's that I *think* are Front Low Light Level Sight System. I can't quite make out the markings with the magnifier I have on hand, so more details to come.
I'm guessing I've had these for maybe 40 years, and had totally forgotten them until I decided to build again and opened up the parts stash box. All appear to have never been installed. No packaging or paperwork. The illumination is no longer visible. Are they worth anything? Thanks. Ken  Attached File Attached File |
|
|
|
Posted: 2/16/2022 6:26:20 PM EDT
[#46]
What is a nice gray receiver extension worth these days.
|
|
|
|
|
Posted: 2/17/2022 11:52:30 AM EDT
[#47]
Retail in that condition is about $40. Unissued, new in the wrap, about $60
|
|
|
|
ME, USA
|
Posted: 2/20/2022 4:43:55 PM EDT
[Last Edit: mooneymedic]
[#48]
What’s a 602 upper without a barrel worth theses days. Port door and sight are installed anodizing is good and condition is maybe 90% conservative.
https://ibb.co/93bbrYH https://ibb.co/0rVKcG0 https://ibb.co/9tTJHL5 https://ibb.co/d6rbJ1k https://ibb.co/0nJt8S8 https://ibb.co/2M5zwFr |
|
|
|
Posted: 2/20/2022 4:52:33 PM EDT
[#49]
Quote HistoryOriginally Posted By mooneymedic: What’s a 602 upper without a barrel worth theses days. Port door and sight are installed anodizing is good and condition is maybe 90% conservative. https://ibb.co/1JrT7M7 They are harder to find than 601 upper receivers and those sell on GB for $600 - $900 depending on condition, etc. If I had a 602 upper to part with, I'd slap it on Gunbroker with an opening bid around $600 and see how high it goes. |
|
|
|
ME, USA
|
Posted: 2/20/2022 4:58:24 PM EDT
[#50]
Thanks I hate the new gun broker…. I’ll throw it up on the EE for a far price. I’m cleaning out my parts. Thanks again!
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
