User Panel
[#1]
Originally Posted By ColtComanche: https://i.redd.it/12hm7yoq3ht71.jpg Just picked up from a retro forum local. Troy XM177E2 lower with refinished Colt 604 upper. I do want to replace the upper with a correct A1 and not a fan of the ARMASPEC Stealth Recoil Spring inside, need a standard mil-spec buffer. I AM loving the 2 position tube and aluminum stock. View Quote Honestly, I think it looks fine with the 604 upper - it's basically an Air Force GAU-5/A/A clone. |
|
Support NBB and Virginia:
https://www.gofundme.com/f/nbb-hiking-club-support |
[Last Edit: ColtComanche]
[#2]
|
|
|
[#3]
|
|
Support NBB and Virginia:
https://www.gofundme.com/f/nbb-hiking-club-support |
[Last Edit: ColtComanche]
[#4]
Originally Posted By MVolkJ: Makes sense. Got a lead on the A1 upper? If you haven't already, call up NDS and get on their wait list. View Quote I do not. I'm only interested in a complete upper, not stripped. I'm not a builder and have no tools. I need to find someone with one, and the tools, locally. I'll pay them for time and labor and not one of these damn shops that once all quoted me $40 to swap a rapidex for a usgi windage dial. |
|
|
[Last Edit: HipSh0T]
[#5]
Originally Posted By ColtComanche: I do not. I'm only interested in a complete upper, not stripped. I'm not a builder and have no tools. View Quote You could always ship all the parts to John Thomas to assemble for you, he only charges like $40.00 plus shipping to assemble an upper. Back in 2007-2008 when I built my first upper I didn't have a barrel wrench yet so I made a post in my Hometown Forum and found a member who was nice enough to install my first barrel. |
|
WTB : 601, 602, Early 604&XM16E1 Uppers.
|
[#6]
Originally Posted By HipSh0T: You could always ship all the parts to John Thomas to assemble for you, he only charges like $40.00 plus shipping to assemble an upper. Back in 2007-2008 when I built my first upper I didn't have a barrel wrench yet so I made a post in my Hometown Forum and found a member who was nice enough to install my first barrel. View Quote Yup. JT is a wizard. Highly recommended. ADCO can do upper assembly as well. |
|
Support NBB and Virginia:
https://www.gofundme.com/f/nbb-hiking-club-support |
[#7]
Originally Posted By HipSh0T: You could always ship all the parts to John Thomas to assemble for you, he only charges like $40.00 plus shipping to assemble an upper. Back in 2007-2008 when I built my first upper I didn't have a barrel wrench yet so I made a post in my Hometown Forum and found a member who was nice enough to install my first barrel. View Quote I'd still need to buy ALL of those parts without a barrel and make sure there's no A2 parts like the dust cover. I was also wanting to trade the existing upper, and John Thomas won't take PayPal or credit cards which I'd need to use for a non-local transaction. |
|
|
[Last Edit: DieselNut]
[#8]
|
|
|
[#9]
Originally Posted By DieselNut: I’m not sure if I’ve ever posted this or not. The mailman dropped off this BOC M7 the other day also. https://i.imgur.com/CIR9J0q.jpg View Quote That's a great looking A1! Parts kit build? |
|
Support NBB and Virginia:
https://www.gofundme.com/f/nbb-hiking-club-support |
[#10]
|
|
|
[#11]
|
|
|
[Last Edit: ColtComanche]
[#12]
Got a chrome BCG for my SP1 https://imgur.com/a/FPytobo
|
|
|
[#13]
|
|
|
[#14]
Originally Posted By ColtComanche: Got a chrome BCG for my SP1 https://imgur.com/a/FPytobo View Quote https://imgur.com/a/FPytobo Mde your link hot, nice screen name!! I guess Colt would have had to change the name on the SP-1 if they had kept their plans of calling it the Colt Comanche! |
|
All of us want to be Hicks, but most of us are Hudson.
|
[#16]
|
|
|
[Last Edit: YardDogOne]
[#17]
|
|
QUALITY MAKES IT A COLT
|
[#18]
|
|
QUALITY MAKES IT A COLT
|
[Last Edit: TriggerFish]
[#19]
|
|
• "I like the M4. I point the blasty end at the angry man and the problems go away." - member, 82nd Airborne, AFG •
|
[Last Edit: Speedwinder]
[#20]
Deleted
|
|
Looks like trouble is coming.
|
[#21]
Working on my DOE build but all I have for now is this:
|
|
|
mil-surp gun parts warehouse extraordinaire
OH, USA
|
[Last Edit: AK47_COMMBLOC]
[#22]
is it hard to post pics here at all? i used to post pics alot on ak forum and gunbroker but never here yet. i upgraded my membership finally. honestly im not into computers i had the wife post me an avatar earlier as i have no patience to navigate the unknown. i do take alot of neat pics however.
the pics me and wifey took in philippines of govt and captured m16s are sweet. i got to handle home made fals and franken m14s and take em apart for photos. one day hot into it the ac was busted so rivers of sweat was dripping on every gun i touched and my camera kept slipping out of my hands bouncing across the floor. bad day to drink coffee. it makes one nervous to finally touch home made abu sayef m16 micros by the way. |
independent fundamental baptist. NOT A COMMIE!
|
[Last Edit: Solo_]
[#23]
Both NDS/Colt mix-matches
Muh Vintage Clone Carbines by Solo__, on Flickr Blood Diamond-ish by Solo__, on Flickr |
|
*Born in Texas, raised in Europe. Will die in the USA*
|
[#24]
@RogerRoger
|
|
|
[#25]
Question for the masses: where are you guys finding chrome XM16E1 BCGs? Or are you substituting new production ones?
Nick |
|
|
[#26]
|
|
All of us want to be Hicks, but most of us are Hudson.
|
[#27]
Originally Posted By AK47_COMMBLOC: is it hard to post pics here at all? i used to post pics alot on ak forum and gunbroker but never here yet. i upgraded my membership finally. honestly im not into computers i had the wife post me an avatar earlier as i have no patience to navigate the unknown. i do take alot of neat pics however. the pics me and wifey took in philippines of govt and captured m16s are sweet. i got to handle home made fals and franken m14s and take em apart for photos. one day hot into it the ac was busted so rivers of sweat was dripping on every gun i touched and my camera kept slipping out of my hands bouncing across the floor. bad day to drink coffee. it makes one nervous to finally touch home made abu sayef m16 micros by the way. View Quote When you make a post and want to attach a picture, go down to the bottom of the post editor page and click on the " Select Image" button, and then the "Upload" button after that. Hope this helps. There are also YouTube videos that might be helpful. @AK47_COMMBLOC |
|
All of us want to be Hicks, but most of us are Hudson.
|
[#28]
|
|
"It just gets that much more exciting when it has a carry handle on it. Or tiger stripes. If you have both, then you have the John Wayne in the Green Berets size of a big win."
|
[#29]
Originally Posted By tiger222: I was messing around on a Saturday night, and….. https://www.ar15.com/media/mediaFiles/61015/C0964B9F-A5A7-45F4-A952-4E02B1CA2956_jpe-2517990.JPG View Quote Drop the gangster grip, otherwise I like it. |
|
WTB : KAC FF M4 RAS P/N 20208
|
[#30]
Originally Posted By HipSh0T: Drop the gangster grip, otherwise I like it. View Quote Hip, I’ve had that grip adapter for over 22 years and I’ve finally found a home for it :) Yes it’s weird, will eventually be removed, but enjoying it for now |
|
"It just gets that much more exciting when it has a carry handle on it. Or tiger stripes. If you have both, then you have the John Wayne in the Green Berets size of a big win."
|
[#31]
Originally Posted By tiger222: Hip, I’ve had that grip adapter for over 22 years and I’ve finally found a home for it :) Yes it’s weird, will eventually be removed, but enjoying it for now View Quote View All Quotes View All Quotes Originally Posted By tiger222: Originally Posted By HipSh0T: Drop the gangster grip, otherwise I like it. Hip, I’ve had that grip adapter for over 22 years and I’ve finally found a home for it :) Yes it’s weird, will eventually be removed, but enjoying it for now Ever try it on a carbine? |
|
WTB : KAC FF M4 RAS P/N 20208
|
[#32]
Originally Posted By HipSh0T: Ever try it on a carbine? View Quote the XM177 was the 2nd choice for it, but the mid-length LSO (proto) handguards lack a heat shield, so these serve a purpose. |
|
"It just gets that much more exciting when it has a carry handle on it. Or tiger stripes. If you have both, then you have the John Wayne in the Green Berets size of a big win."
|
[#33]
|
|
To the everlasting glory of the infantry...
|
[#34]
|
|
|
[#35]
|
|
|
[Last Edit: kingoftheriver]
[#36]
Originally Posted By Ramcharger_pilot: M12 rack in the living room. Have had this for years and finally got it in the house. https://www.ar15.com/media/mediaFiles/262615/20230306_184849_jpg-2736626.JPG View Quote You have remarkably good taste in furniture. Unfortunately my wife would just doesn't appreciate such fine furnishings, especially when they are artistically embellished with valuable antique nick nacks. RCA |
|
|
[#37]
|
|
Hansan: "This is a .30 caliber, gas operated, clip fed, semi-automatic rifle....."
Soldier: "Look, you ain't sellin it to me, you're only showing me how it works." |
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.