User Panel
Posted: 12/2/2011 5:09:30 PM EDT
[Last Edit: Cold]
|
|
It starts with your head, then use your hands, if you try it in reverse, you don't even have a chance.
When there's lead in the air... there's hope in the heart. |
|
|
"Among the many misdeeds of the British rule in India, history will look upon the act of depriving a whole nation of arms, as the blackest." Gandhi, An Autobiography, p. 446 (Beacon Press paperback edition)
|
|
Champion Firearms
http://www.championfirearms.com (979) 764-1445 |
Originally Posted By BadSVT: My 300blk that I threw together using spare parts I had in the closet http://aggunner.com/pictures/ar/300blk/300blk.jpg http://aggunner.com/pictures/ar/300blk/300blk2.jpg Can I trade you closets? |
|
|
Originally Posted By BadSVT:
My 300blk that I threw together using spare parts I had in the closet http://aggunner.com/pictures/ar/300blk/300blk.jpg http://aggunner.com/pictures/ar/300blk/300blk2.jpg I like the way that turned out. It looks futuristic, for lack of a better word. |
|
|
Originally Posted By BadSVT:
My 300blk that I threw together using spare parts I had in the closet http://aggunner.com/pictures/ar/300blk/300blk.jpg http://aggunner.com/pictures/ar/300blk/300blk2.jpg I've been trying to figure out if my suppressor would fit under one of the PRI triangular tubes, if not my build will be pretty close to yours. Damn sexy for sure!! |
|
|
Originally Posted By OsoGrande:
Originally Posted By BadSVT:
My 300blk that I threw together using spare parts I had in the closet http://aggunner.com/pictures/ar/300blk/300blk.jpg http://aggunner.com/pictures/ar/300blk/300blk2.jpg I've been trying to figure out if my suppressor would fit under one of the PRI triangular tubes, if not my build will be pretty close to yours. Damn sexy for sure!! There's no way anything much over an inch will fit under the PRI Deltas. |
|
I, like God, do not play with dice and do not believe in coincidence.
|
|
"You are not a dog begging for scraps from your master. You are a citizen being robbed by your servant." Hebrew_Battle_Rifle
"this is ARFCOM you should be gearing up for Iwo Jima" oldschool63 |
Originally Posted By BadSVT:
My 300blk that I threw together using spare parts I had in the closet http://aggunner.com/pictures/ar/300blk/300blk.jpg http://aggunner.com/pictures/ar/300blk/300blk2.jpg Storm Trooper rifle (first thing that comes to mind).... I like it! |
|
|
Originally Posted By cchurchi:
300BLK in the middle: http://img140.imageshack.us/img140/3612/dsc00052hg.jpg http://img337.imageshack.us/img337/628/dsc00055x.jpg http://img375.imageshack.us/img375/2831/dsc02592yo.jpg Nice looking weapon - how about some spes Thanks |
|
Proud Member of Team Ranstad .... The Fantastic Bastards
Z.E.A.D.S - Zombie Extermination And Disposal Specialist Zombieshops - www.zombieshops.com |
Originally Posted By Sir_Peter:
Originally Posted By cchurchi:
300BLK in the middle: http://img140.imageshack.us/img140/3612/dsc00052hg.jpg http://img337.imageshack.us/img337/628/dsc00055x.jpg http://img375.imageshack.us/img375/2831/dsc02592yo.jpg Nice looking weapon - how about some spes Thanks Specs: 8" 300 AAC BLACKOUT Stainless Barrel ––1 in 8" twist rifling ––Extended Feed Ramps ––Beadblasted finish on barrel ––SR47 KAC PDW dimples ––Pistol length gas system ––5/8x24 threads ––Low-profile gas block pinned to barrel ––Forged Vltor MUR upper receiver featuring an anti-rotation interface with the handguard ––7" free floated handguard w/ 1913 rails ––Shot peened and MP tested bolt ––Auto carrier with properly staked carrier key ––Gun Fighter Charging Handle ––Blackout 51T muzzle brake Upper Weight: 3 3/4 lbs Rifle includes above plus: ––Forged Gen I Lower ––Mil-Spec receiver extension ––Noveske QD End Plate, staked ––H2 Buffer ––Magpul adjustable stock ––Troy Flip-up front and rear sights ––MOE pistol grip ––One 30 rd mag included ––AAC 762-SDN-6 suppressor. ––Aimpoint T1 with American Defense QD mount ––Blue force gear sling ––Gear Sector hand stop Rifle Weight: 6 lbs |
|
|
"Among the many misdeeds of the British rule in India, history will look upon the act of depriving a whole nation of arms, as the blackest." Gandhi, An Autobiography, p. 446 (Beacon Press paperback edition)
|
|
Originally Posted By cchurchi:
Originally Posted By Sir_Peter:
Originally Posted By cchurchi:
300BLK in the middle: http://img140.imageshack.us/img140/3612/dsc00052hg.jpg http://img337.imageshack.us/img337/628/dsc00055x.jpg http://img375.imageshack.us/img375/2831/dsc02592yo.jpg Nice looking weapon - how about some spes Thanks Specs: 8" 300 AAC BLACKOUT Stainless Barrel ––1 in 8" twist rifling ––Extended Feed Ramps ––Beadblasted finish on barrel ––SR47 KAC PDW dimples ––Pistol length gas system ––5/8x24 threads ––Low-profile gas block pinned to barrel ––Forged Vltor MUR upper receiver featuring an anti-rotation interface with the handguard ––7" free floated handguard w/ 1913 rails ––Shot peened and MP tested bolt ––Auto carrier with properly staked carrier key ––Gun Fighter Charging Handle ––Blackout 51T muzzle brake Upper Weight: 3 3/4 lbs Rifle includes above plus: ––Forged Gen I Lower ––Mil-Spec receiver extension ––Noveske QD End Plate, staked ––H2 Buffer ––Magpul adjustable stock ––Troy Flip-up front and rear sights ––MOE pistol grip ––One 30 rd mag included ––AAC 762-SDN-6 suppressor. ––Aimpoint T1 with American Defense QD mount ––Blue force gear sling ––Gear Sector hand stop Rifle Weight: 6 lbs Thank You now the decision as to whether I should form 1 one of my lowers or to pull the pins on the pinned mag block on my 9mm sbr |
|
Proud Member of Team Ranstad .... The Fantastic Bastards
Z.E.A.D.S - Zombie Extermination And Disposal Specialist Zombieshops - www.zombieshops.com |
-
|
|
|
Originally Posted By mechanicuss:
kiss sp-1 car blackout; early lightweight wilson carbine barrel: http://i302.photobucket.com/albums/nn86/mechanicus1/300blk.jpg: Mind linking your thread about doing that build? I recall that it rocked. |
|
"Among the many misdeeds of the British rule in India, history will look upon the act of depriving a whole nation of arms, as the blackest." Gandhi, An Autobiography, p. 446 (Beacon Press paperback edition)
|
- |
|
|
Originally Posted By jasonusvi:
http://i752.photobucket.com/albums/xx166/jasonusvi/LMT%20MRP/mrpfb5.jpg http://i752.photobucket.com/albums/xx166/jasonusvi/LMT%20MRP/mrpfb2.jpg http://i752.photobucket.com/albums/xx166/jasonusvi/300BLK1.jpg Is that a Noveske 10" in there? If it is you have just answered my question on whether or not a 10" will work in the MRP CQB platform and have enough room for a can to mount on the end. |
|
|
Originally Posted By cchurchi:
300BLK in the middle: http://img140.imageshack.us/img140/3612/dsc00052hg.jpg http://img337.imageshack.us/img337/628/dsc00055x.jpg http://img375.imageshack.us/img375/2831/dsc02592yo.jpg On that 8" noveske, what kind of rail cover and hand stop is that? |
|
|
Crappy cell phone pic... but in the spirit of Christmas...
http://img805.imageshack.us/img805/792/20fd.jpg Tobey (my pitty) was mesmerized by it lol. |
|
|
How are the MOEs supported at the front? I've haven't had an upper with a delta ring yet but from what I have seen I don't get how your hand guards are held.
|
|
"Among the many misdeeds of the British rule in India, history will look upon the act of depriving a whole nation of arms, as the blackest." Gandhi, An Autobiography, p. 446 (Beacon Press paperback edition)
|
Originally Posted By jasonusvi:
How are the MOEs supported at the front? I've haven't had an upper with a delta ring yet but from what I have seen I don't get how your hand guards are held. I'm using a standard, round handguard retaining cap, but a triangular handguard cap works too. The "faux" gas block out front is providing a surface for the handguard cap to butt up against, with the functional low pro gas block under the MOE handguard for the carbine length gas system. |
|
NRA Life Member
Go Noles!!!!!!!!!!!! |
Originally Posted By RTBA-8:
Originally Posted By jasonusvi:
How are the MOEs supported at the front? I've haven't had an upper with a delta ring yet but from what I have seen I don't get how your hand guards are held. I'm using a standard, round handguard retaining cap, but a triangular handguard cap works too. The "faux" gas block out front is providing a surface for the handguard cap to butt up against, with the functional low pro gas block under the MOE handguard for the carbine length gas system. Got it... thanks. |
|
"Among the many misdeeds of the British rule in India, history will look upon the act of depriving a whole nation of arms, as the blackest." Gandhi, An Autobiography, p. 446 (Beacon Press paperback edition)
|
|
Looks good! I hope WA passes the SBR bill - 10" 300blk is on the wish list.
|
|
|
|
You guys are going to make me get a 2nd job.
|
|
"Homo sapiens; a dying species,
Poor, sick, dumb, numb, feeding feces.; Half-eaten, starved, beaten, multiplying, lying, cheating, lean, mean, unclean, ammo for the gun-machine" -KMFDM |
|
Lots of nice guns, keep'em coming!
|
|
|
Originally Posted By fiver: For instance, when I want a decent blowjob I visit a prostitute. I don't tear into the local tire store and then walk out of there angry because they sold me tires when I was looking to get my dick wet.
|
Originally Posted By BobRoberts:
Me doing a little shooting. http://i54.photobucket.com/albums/g91/fiddlersgreen21/229702_10150243066816584_88228341583_8798161_6910794_n.jpg note to self: People from Iowa have sissy hands. hahaha. nice rifle. |
|
|
I Can't decide on what upper.
The AAC 9" or the Noveske 8" Within $200 or so dollars of each other, I think. Your opinion? sorry no pics yet. |
|
"Do not call attention to yourself and invite the man into your life" Bama-Shooter
Semper Fidelis 1970-1974 |
Originally Posted By Pacs:
I Can't decide on what upper. The AAC 9" or the Noveske 8" Within $200 or so dollars of each other, I think. Your opinion? sorry no pics yet. Noveske. There should be no need for additional explanation. Something about an iron cross just says it all. I have been there 3 times and I'm going back for more. |
|
|
|
|
|
Originally Posted By watersniper:
http://i576.photobucket.com/albums/ss204/watersniper/300Blackout001.jpg http://i576.photobucket.com/albums/ss204/watersniper/300Blackout008.jpg 300 BLK barrel by Core 15. 9.5" barrel, 1-8" twist. JP Handguard & Geissele match trigger from the National Defense Match. Registered SBR lower with Magpul furniture. Vortex red dot, Gemtech Trinity 9mm can with 5/8-24 adapter. (Yes, before the haters hate- I called Gemtech and they said for subsonic use only it's fine) Really like that set up and dual use of the can. Use teflon tape on the threads? |
|
"Among the many misdeeds of the British rule in India, history will look upon the act of depriving a whole nation of arms, as the blackest." Gandhi, An Autobiography, p. 446 (Beacon Press paperback edition)
|
Originally Posted By rick55_55:
Finally got it set up the way i want. http://i141.photobucket.com/albums/r72/rick55_55/Guns/CIMG2327.jpg http://i141.photobucket.com/albums/r72/rick55_55/Guns/CIMG2331.jpg What sights are those? |
|
|
Originally Posted By BrownSunshine:
Originally Posted By rick55_55:
Finally got it set up the way i want. http://i141.photobucket.com/albums/r72/rick55_55/Guns/CIMG2327.jpg http://i141.photobucket.com/albums/r72/rick55_55/Guns/CIMG2331.jpg What sights are those? Centurion Arms C4 "Diopter" Sights....extremely solid sights. I replaced the rear drum with an HK rifle drum, they come with a MP5 drum. Pretty much HK416 sights but at a higher plain so they are more comfortable to use. Check Them Out |
|
|
Originally Posted By watersniper:
http://i576.photobucket.com/albums/ss204/watersniper/300Blackout001.jpg http://i576.photobucket.com/albums/ss204/watersniper/300Blackout008.jpg 300 BLK barrel by Core 15. 9.5" barrel, 1-8" twist. JP Handguard & Geissele match trigger from the National Defense Match. Registered SBR lower with Magpul furniture. Vortex red dot, Gemtech Trinity 9mm can with 5/8-24 adapter. (Yes, before the haters hate- I called Gemtech and they said for subsonic use only it's fine) Nice setup. I have a Trinity also that I plan on using whenever I get a .300 Blackout setup. I also asked Gemtech if the Trinity would hold up and got the same answer. |
|
|
|
Originally Posted By cchurchi:
Received my first batch of UMC 115gr ammo: http://img221.imageshack.us/img221/1414/dsc03528op.jpg L to R: 115gr UMC, 147gr CMMG, 220gr Remington: http://img502.imageshack.us/img502/6735/dsc03529l.jpg what's the pistol bag in the background of the first picture. Thanks |
|
Proud Member of Team Ranstad .... The Fantastic Bastards
Z.E.A.D.S - Zombie Extermination And Disposal Specialist Zombieshops - www.zombieshops.com |
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.