Quoted:
So the QD Swivel attaches to the Crane/LMT also? Is there an add-on that I'd have to install to get the Crane to accept the QD? I am NOW 99% positive that I'm going to purchase the Crane for my Christmas present.
Second, what do you have the QD attached to on the rail? Is that a TD product?
Thanks, Lancelot. I'm glad you live in Colorado. I think I'd be broke if you lived down here.
|
The TD PR-4 and the DD will fit on any mil-spec tube. So they will work fine with the Crane. I suspect it will fit on commercial tubes too, but I haven't tried. The PR4 is a tight fit on my mil-spec tubes, which is what you want. The pictures in the folder show the PR4 with different stocks so you can see how it looks. So you don't need any add ons for the PR4 to work.
There is a QD swivel base that will mount directly on the Crane stock if you aren't going to use the PR4 or want to run a three-point. If you install both you have lots of options for slinging the rifle. Blue Force Gear makes, or made, a sling that would convert from single point to two point to three point, and used the QD swivels. That way only one sling would do all three modes and you only needed one sling for everything.
The swivel I have on the front rail is by KAC. There is also a similar model made by MI. The MI is less expensive. Both screw on the rail and use the QD type swivels. I need to take some pictures of the MI for comparison with the KAC. The KAC is a bit more robust, but both are great mounts.