I want to attach a Harris bipod to my NM free float handguard.  What attachment or how do I go about doing it.
Anybody have an idea?
Thanks, DCS

[img]http://www.z06vette.com/gallery/data/500/135bipod.jpg[/img]
If you have a bottom rail, or can attach a small segment of Picatinny rail you can use the KAC adapter.  I use mine on a FF RAS and on my RIS (shown).  -TF

If no Picatinny rails, use a Harris #5 adapter.

[img]http://www.uws.com/HARRISBIPODS/IMG/SmallHarrisAdapters.jpeg[/img]

Depending on the size of the mounting hole and gauge of the tube, there will be [b]some[/b] slop/free play. You'll need to improvise a bit by shimming if you want close to zero movement. Once you're satisfied, put some [blue] blue LocTite [/blue] on the threads.

One other tip is to check/retighten the bipod thumbscrew every 20 rounds or so because it will loosen up a bit.