User Panel
User Panel
User Panel
|
Posted: 3/5/2021 7:06:27 PM EDT
[Last Edit: TinyCrumb]
This started off as a general JSOC thread but it's quickly become nothing more than talking about the Noveske Navy, so let's just dedicate it to that.
|
|
|
|
|
Posted: 12/24/2021 11:40:15 PM EDT
[#1]
Quote HistoryOriginally Posted By LsuJon: Not yet. I plan on it however. There was one on the EE that I purchased yesterday. I'll post some pics whenever I get it. |
|
|
|
GA, USA
|
Posted: 12/30/2021 1:03:28 AM EDT
[Last Edit: Silverww]
[#2]
Is there an available parts list for the noveske devgru rifle? Most specifically what is the correct barrel?
|
|
|
TX, USA
|
Posted: 12/30/2021 5:19:15 AM EDT
[#3]
https://noveske.com/products/lightweight-barrel-5-56/
https://noveske.com/products/10-5-lightweight-contour-barrel-300blk/ If they're ever available. Other than that, NSR-9 handguard Gen 3 upper Gen 1 lower Noveske BCG w/out logo Noveske pivot and takedown pins Noveske marked Geissele ACH charging handle Caliber marked dust cover Sandman S-MIL suppressor with untimed flash hiders Aimpoint T2 w/ 1.57 Scalarworks mount, Eotech, ATACR optics. Possibly a Sig Tango6 too Most furniture is Magpul: SL-K stock, K2 grip, BAD lever, end plate, but there's wide variety on accessories and furniture seen. |
|
|
|
Posted: 12/30/2021 8:06:56 AM EDT
[#4]
@LsuJon and whoever else was interested, here is the Inforce WML with the Arisaka low profile MLOK rail section. I misplaced my Magpul rail section, so I don't have anything to compare it to.
 Attached File |
|
|
|
|
Posted: 1/2/2022 12:53:19 AM EDT
[#5]
|
|
|
|
|
Posted: 1/2/2022 1:34:25 AM EDT
[#6]
Quote HistoryOriginally Posted By officerX: Noveske BCG for $150 if anyone needs one. Noveske BOLT CARRIER GROUP 5.56 COMPLETE No obvious markings, so wouldn't someone just buy a Toolcraft or AO Precision BCG? |
|
|
|
|
Posted: 1/2/2022 1:45:30 AM EDT
[#7]
Quote HistoryOriginally Posted By WTFShane: No obvious markings, so wouldn't someone just buy a Toolcraft or AO Precision BCG? You could, but it wouldn’t be clone correct. |
|
|
|
|
Posted: 1/2/2022 2:01:07 AM EDT
[#8]
 What sling, trigger? Aimpoint & LT combo? Thought you Noveske gurus might know. |
|
|
|
|
Posted: 1/2/2022 2:03:56 AM EDT
[#9]
Quote HistoryOriginally Posted By bobweaver: https://www.ar15.com/media/mediaFiles/215811/2A7C0316-2738-493E-B000-7B6218E6FB61-2225423.jpg What sling, trigger? Aimpoint & LT combo? Thought you Noveske gurus might know. Scalarworks mount for the T2. Trigger is a Geissele contract one, not publicly available (I think that’s correct). Not sure about the sling - maybe shooter preference? |
|
|
|
|
Posted: 1/2/2022 2:08:06 AM EDT
[#10]
Quote HistoryOriginally Posted By bobweaver: https://www.ar15.com/media/mediaFiles/215811/2A7C0316-2738-493E-B000-7B6218E6FB61-2225423.jpg What sling, trigger? Aimpoint & LT combo? Thought you Noveske gurus might know. VTAC sling? Not sure on the trigger. T1 with LT660. |
|
|
|
|
Posted: 1/2/2022 5:17:28 AM EDT
[Last Edit: officerX]
[#11]
Originally Posted By bobweaver: https://www.ar15.com/media/mediaFiles/215811/2A7C0316-2738-493E-B000-7B6218E6FB61-2225423.jpg What sling, trigger? Aimpoint & LT combo? Thought you Noveske gurus might know. Originally Posted By officerX: Scalarworks mount for the T2. Trigger is a Geissele contract one, not publicly available (I think that’s correct). Not sure about the sling - maybe shooter preference? Originally Posted By WTFShane: VTAC sling? Not sure on the trigger. T1 with LT660. Maybe I was confused. Are you asking for details about the pic you posted or about how it’s supposed to be? |
|
|
|
WA, USA
|
Posted: 1/2/2022 3:47:51 PM EDT
[#12]
AR Gold trigger from what I can tell
|
|
|
TX, USA
|
Posted: 1/2/2022 6:11:42 PM EDT
[Last Edit: ABit]
[#13]
Big thanks to MNRidesHonda for the Cerakote. I finally got around to throwing everything together. Mil Sandman should be here any day and a second one is on order with the new Form 4 system. We will see how that goes.
|
|
|
|
Posted: 1/2/2022 7:02:10 PM EDT
[#14]
Quote HistoryOriginally Posted By ABit: Big thanks to MNRidesHonda for the Cerakote. I finally got around to throwing everything together. Mil Sandman should be here any day and a second one is on order with the new Form 4 system. We will see how that goes. https://imagizer.imageshack.com/img923/3716/GahxCO.jpg That’s a whole lot of awesomeness in one pic! What barrels are you using? |
|
|
|
|
Posted: 1/2/2022 9:18:53 PM EDT
[Last Edit: Advance]
[#15]
Quote HistoryOriginally Posted By ABit: Big thanks to MNRidesHonda for the Cerakote. I finally got around to throwing everything together. Mil Sandman should be here any day and a second one is on order with the new Form 4 system. We will see how that goes. https://imagizer.imageshack.com/img923/3716/GahxCO.jpg Anti-rotation pins? DEVGRU gets the best bleeding edge tech and they have an almost unlimited budget. DEVGRU not running them tells you what about anti-rotation pins? A property installed trigger does not have walking pins. I could make the argument that anti-lock pins actually do more harm than good. |
|
|
|
|
Posted: 1/2/2022 9:30:06 PM EDT
[#16]
Where can I find the Noveske marked forward assist?
I've only started searching for them recently and only saw them listed on the Noveske site and Rainier Arms. |
|
|
|
|
Posted: 1/3/2022 12:38:02 PM EDT
[#17]
Quote HistoryOriginally Posted By WTFShane: @LsuJon and whoever else was interested, here is the Inforce WML with the Arisaka low profile MLOK rail section. I misplaced my Magpul rail section, so I don't have anything to compare it to. https://www.ar15.com/media/mediaFiles/283502/20211230_005647_jpg-2221671.JPG  Attached File |
|
|
|
|
Posted: 1/3/2022 2:31:46 PM EDT
[#18]
Originally Posted By WTFShane: Where can I find the Noveske marked forward assist? I've only started searching for them recently and only saw them listed on the Noveske site and Rainier Arms. https://www.simplemanarmory.com/product/noveske-marked-forward-assist/ |
|
|
|
|
Posted: 1/3/2022 3:26:47 PM EDT
[#19]
Quote HistoryOriginally Posted By LsuJon: I know it isn't side by side but here it is on a magpul polymer section: https://www.ar15.com/media/mediaFiles/316069/0005E32C-DB6A-425D-AA99-0EF4DCD03259_jpe-2226955.JPG Kinda wanting a Inforce light. Sort of.  Cold weather-ish  |
|
|
|
|
Posted: 1/3/2022 4:23:13 PM EDT
[#20]
Quote HistoryOriginally Posted By 2Keylows: Kinda wanting a Inforce light. Sort of. Cold weather-ish https://i.imgur.com/FePtyl4.jpg That looks more taxing than Crysis. |
|
|
|
NC, USA
|
Posted: 1/3/2022 4:27:04 PM EDT
[#21]
Quote HistoryOriginally Posted By 2Keylows: Kinda wanting a Inforce light. Sort of. Stop....... 
|
|
|
|
Posted: 1/3/2022 4:31:04 PM EDT
[#22]
Quote HistoryOriginally Posted By Tlduncan14: https://www.simplemanarmory.com/product/noveske-marked-forward-assist/ $15 flat rate shipping for an item that small. I cant do it. |
|
|
|
|
Posted: 1/3/2022 4:39:51 PM EDT
[#23]
Quote HistoryOriginally Posted By PFran42: That looks more taxing than Crysis. Quote HistoryOriginally Posted By PFran42: That looks more taxing than Crysis. Lol it was a bitch trying to get the angle with phone/rifle. Originally Posted By JohnnyUtah427: Stop....... Give me non-potato pics of Sf V lights than.
|
|
|
|
|
Posted: 1/4/2022 8:40:03 AM EDT
[#24]
Are the Noveske receiver extensions 4 or 6 position?
|
|
|
|
|
Posted: 1/4/2022 9:52:43 AM EDT
[#25]
Quote HistoryOriginally Posted By WTFShane: Are the Noveske receiver extensions 4 or 6 position? Six |
|
|
|
|
Posted: 1/4/2022 9:57:05 AM EDT
[#26]
Quote HistoryOriginally Posted By officerX: Six ¡Gracias! |
|
|
|
TX, USA
|
Posted: 1/4/2022 11:10:06 AM EDT
[#27]
Quote HistoryOriginally Posted By doyouquaxu: https://noveske.com/products/lightweight-barrel-5-56/ https://noveske.com/products/10-5-lightweight-contour-barrel-300blk/ If they're ever available. Other than that, NSR-9 handguard Gen 3 upper Gen 1 lower Noveske BCG w/out logo Noveske pivot and takedown pins Noveske marked Geissele ACH charging handle Caliber marked dust cover Sandman S-MIL suppressor with untimed flash hiders Aimpoint T2 w/ 1.57 Scalarworks mount, Eotech, ATACR optics. Possibly a Sig Tango6 too Most furniture is Magpul: SL-K stock, K2 grip, BAD lever, end plate, but there's wide variety on accessories and furniture seen. I'm assuming the BCG is phosphate and not Nitride? |
|
|
|
Posted: 1/4/2022 1:00:43 PM EDT
[#28]
Quote HistoryOriginally Posted By WTFShane: ¡Gracias! Quote HistoryOriginally Posted By WTFShane: ¡Gracias! Double check the extension also has the drainage holes. Originally Posted By 4runnagunna: I'm assuming the BCG is phosphate and not Nitride? Yes, standard phosphate finish. No markings. |
|
|
|
|
Posted: 1/4/2022 5:33:56 PM EDT
[#29]
Quote HistoryOriginally Posted By 2Keylows: Double check the extension also has the drainage holes. Interesting. I wasn't aware of these. I already bought the QD end plate, so I'll just cheap out and use a spare receiver extension I have. |
|
|
|
|
Posted: 1/4/2022 6:26:15 PM EDT
[#30]
Quote HistoryOriginally Posted By WTFShane: Interesting. I wasn't aware of these. I already bought the QD end plate, so I'll just cheap out and use a spare receiver extension I have. Last 4 positions will have the openings, plus the standard hole on the rear of the receiver. If you buy Noveske's receiver extension kit, it will for sure have the drainage holes. |
|
|
|
|
Posted: 1/4/2022 6:48:21 PM EDT
[#31]
The drainage holes was one of the many enhancements/revisions to the HK 416 for the "OTB" capability. Over the beach.
When assembling my lowers I noticed that Noveske tubes had them too. Kind of neat. |
|
|
|
|
Posted: 1/4/2022 7:09:25 PM EDT
[#32]
Quote HistoryOriginally Posted By 2Keylows: Last 4 positions will have the openings, plus the standard hole on the rear of the receiver. If you buy Noveske's receiver extension kit, it will for sure have the drainage holes. I bought the end plate a few weeks ago. I didn't find out about the receiver extension kit until yesterday. I'm building an airsoft gun, so really don't need all the parts to be correct. Besides some small stuff not being nitride and it obviously being airsoft, I've gathered most of the parts needed for a decent replica. |
|
|
|
|
Posted: 1/4/2022 7:26:32 PM EDT
[#33]
Quote HistoryOriginally Posted By WTFShane: I bought the end plate a few weeks ago. I didn't find out about the receiver extension kit until yesterday. I'm building an airsoft gun, so really don't need all the parts to be correct. Besides some small stuff not being nitride and it obviously being airsoft, I've gathered most of the parts needed for a decent replica. That's actually.... pretty sweet lol. Makes sense for it not being one to one. Super cheap trainer. |
|
|
|
|
Posted: 1/4/2022 7:53:15 PM EDT
[#34]
Quote HistoryOriginally Posted By 2Keylows: That's actually.... pretty sweet lol. Makes sense for it not being one to one. Super cheap trainer. Just the ammo. If Dead Air made a training can I probably would've done the same double pin and weld like I did to build my CQBR upper to 16 inches. I really need to get off this rock so I can enjoy the fun stuff. 
|
|
|
|
GA, USA
|
Posted: 1/5/2022 11:22:10 AM EDT
[#35]
Okay, dumb question….are they only using the stainless barrels on these, or do we know for sure?
|
|
|
|
Posted: 1/5/2022 12:04:11 PM EDT
[#36]
Quote HistoryOriginally Posted By 44willysmb: Okay, dumb question….are they only using the stainless barrels on these, or do we know for sure? Noveske Light weight profiled SS barrels. |
|
|
|
|
Posted: 1/6/2022 9:54:28 AM EDT
[#37]
Anyone have a picture of a Mawl on a Noveske Navy?
|
|
|
|
NC, USA
|
Posted: 1/6/2022 10:10:26 AM EDT
[#38]
Quote HistoryOriginally Posted By trapsh00ter99: Anyone have a picture of a Mawl on a Noveske Navy? @tacticoolduck I believe he ran a MAWL on his...hopefully he'll chime in and post up some pics. |
|
|
|
Posted: 1/8/2022 1:19:44 PM EDT
[#39]
Sierra Echo November Delta November Uniform Delta Echo Sierra
  
|
|
|
|
|
Posted: 1/8/2022 1:39:15 PM EDT
[#40]
Quote HistoryOriginally Posted By MNRidesHonda: Sierra Echo November Delta November Uniform Delta Echo Sierra https://i.imgur.com/bKk4MlB.jpg https://i.imgur.com/PjIaP9r.jpg https://i.imgur.com/0JjMx15.jpg I'll bet that fucker peels open like a banana. 
|
|
|
|
|
Posted: 1/8/2022 2:58:40 PM EDT
[#41]
Quote HistoryOriginally Posted By SecretSquirell: I'll bet that fucker peels open like a banana. 201 is a dope round. |
|
|
|
TX, USA
|
Posted: 1/9/2022 12:32:41 PM EDT
[#42]
Stamp came back approved today, that was a nice surprise on a Sunday. Using a non-LW profile barrel.
 
|
|
|
|
Posted: 1/12/2022 1:13:02 PM EDT
[Last Edit: 2Keylows]
[#43]
Quote HistoryOriginally Posted By 2Keylows: Yuup, it has some heft to it. Speaking of weight, I was able to crunch some numbers on the 556 upper. Depending if you are running the standard Noveske CQB barrel, you'll actually be ~2oz. heavier than a standard Cqbr upper. (w/govt. profile barrel) I don't physically have a LW Navy barrel to weigh myself; weight was reported to me by someone else. Everything else I was able to verify with my postal scale. Noveske Complete Upper w/LW barrel = 3lb, 10.8oz Noveske Complete Upper w/ Standard CQB barrel = 3lb, 13.8oz Standard Complete CQBR w/ govt. profile barrel = 3lb, 11.9oz Stripped barrel weights, no GB Navy LW Profile = 20.3oz CQB barrel = 23.2oz Don't take my weights as gospel, I'm sure there maybe small variances depending on scale. If anything, it shows there is a small weight savings when compared to a CQBR. Eta: To clarify, The completed upper weights include their respective flash hider. Noveske w/DAFH, Cqbr w/ SF 4 prong. Quoting myself to include the 300Blk LW barrel weight. Appreciate the dudes here that helped me source one. Stripped barrel weight, no GB 300Blk LW profile = 18oz 300 LW w/ GB, GT, Rollpins = 19.9oz Super tight fit with a 0.090 pin gauge.    Eta: And all was right in the world. Shaved exactly 2oz. from the WC barrel to Noveske LW. 
|
|
|
|
TX, USA
|
Posted: 1/12/2022 8:45:14 PM EDT
[#44]
Quote HistoryOriginally Posted By 2Keylows: Quoting myself to include the 300Blk LW barrel weight. Appreciate the dudes here that helped me source one. Stripped barrel weight, no GB 300Blk LW profile = 18oz 300 LW w/ GB, GT, Rollpins = 19.9oz Super tight fit with a 0.090 pin gauge. https://i.imgur.com/0YVJ63E.jpg https://i.imgur.com/ukfku7U.jpg https://i.imgur.com/rgY4vBg.jpg Any more leads on one of these LW barrels? |
|
|
|
Posted: 1/12/2022 11:22:02 PM EDT
[#45]
Quote HistoryOriginally Posted By m4socom: Any more leads on one of these LW barrels? Check the Noveske site at least twice a day.
|
|
|
|
|
Posted: 1/14/2022 8:37:39 PM EDT
[#46]
Anyone get their approval on the sandman lately? If so when did you file/buy?
|
|
|
|
|
Posted: 1/14/2022 8:54:38 PM EDT
[#47]
Quote HistoryOriginally Posted By Bhavin22: Anyone get their approval on the sandman lately? If so when did you file/buy? Still waiting.
|
|
|
|
|
Posted: 1/14/2022 11:31:56 PM EDT
[#48]
Quote HistoryOriginally Posted By Bhavin22: Anyone get their approval on the sandman lately? If so when did you file/buy? AFT cashed the check on 6/9/21. Still waiting. |
|
|
|
|
Posted: 1/15/2022 1:14:12 AM EDT
[#49]
Quote HistoryOriginally Posted By JLAudio: AFT cashed the check on 6/9/21. Still waiting. Okay mine is basically the same time as yours. |
|
|
|
TX, USA
|
Posted: 1/15/2022 1:26:30 AM EDT
[#50]
Night Force has up some nice tannodized teaser photos of the ATACR for Shot Show #moneypit
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
