User Panel
User Panel
User Panel
|
Posted: 7/1/2020 5:13:23 PM EDT
[Last Edit: Lancelot]
This thread is solely for questions on the value of complete AR-15 rifles. There is a thread in the Uppers and Lowers forum that is solely for questions on the value of lowers/uppers/parts.
Uppers and Lowers Appraisal Thread If you can offer a logical price value, please do so. Please do not turn this into an argumentative thread or a general discussion thread. We hope this will be beneficial for this section of the forums. If you have questions please PM one of the mods. Thanks! |
|
|
|
|
Posted: 7/1/2020 5:57:18 PM EDT
[Last Edit: P08]
[#1]
What is nice condition Knights Armory SR-15E3 Mod 0 worth? Post a pic later
|
|
|
|
NC, USA
|
Posted: 7/12/2020 12:45:40 PM EDT
[Last Edit: ncbullseye]
[#2]
Hey All,
Looking for any info I can get on a Colt Match Target HBAR. I did call Colt archives and was told that the serial number was a private contract run from early 90's, they would not elaborate past that. Simply said they don't give out private contract information. I have attached pictures. The side of the upper is marked "Colt 223", I've never seen that on other Match rifles. I am not the original owner, it is in great condition and I do have the carry handle. The serial number is PMH003510, I'm guessing the "P" is for private run? It also is marked "C MP 556 1/9" on the barrel. I'm familiar with this marking and purpose. Colt really was of no help, guess due to privacy. Anyone have any input? Thanks    
|
|
|
TN, USA
|
Posted: 7/12/2020 3:56:15 PM EDT
[#3]
Hey folks. I am talking to a fellow about a trade and wanted to get your opinion. He has an unfired Stag Arms SA2 which he purchased in 2008. Everything I’ve read indicates that these were retailing at around $800 before the Scamdemic. I would be trading my all original blued Colt Mark IV 1911 .45 (90-95% which was manufactured in 1972. After research and talking with various “experts”, I’m setting the trade value of the Colt at $1500. Not really sure about that but it seems pretty obvious that some “boot” should be involved in the trade.
Anyway, any opinions on the value of the Stag would be much appreciated. |
|
|
IN, USA
|
Posted: 7/13/2020 6:26:54 PM EDT
[Last Edit: lon]
[#4]
I might have an opportunity to sell my HBAR tomorrow. The chance came up kinda out of the blue and don't think I can research it decently by then, so I thought I'd ask hive what a fair price for it might be.
Its a clean (light scratches on the stock only) Pre-Ban Colt Sporter Match HBAR, Ser# 0832xx, no bayo lug, with flash hider, bought new in '94. I have between 2000- 3000 rnds. through it, so bbl probably needs replaced for match accuracy, but I'm not good enough with irons to really tell. If I could get a price... for sale in a pre-ban state, (through FFL) ...and a price locally in Indiana, it would really help me out. The sale will be Face to Face locally, but don't want to give it away if I can make a few more bucks and put an AR in the hands of some poor, needy soul in a eastern "pre-ban only" state. TIA |
|
|
NC, USA
|
Posted: 7/20/2020 3:55:40 PM EDT
[#5]
This has been sitting in (a rifle sock) my safe for two years+ w/less than 100 rounds down the pipe and I'm considering selling it. I tried pricing this out on the inter-web, but prices were all over the place. Just looking for a ballpark $$$...horseshoes and hand-grenades.
|
|
|
|
Posted: 7/21/2020 1:46:15 AM EDT
[#6]
Got this HK416C build in a trade package. Shot it some and realized I prefer my DI guns so I'm considering off loading it. I'm not sure the value since I got it in a package deal and I'm not familiar with HK416 pricing. Most of the stuff I see is just components or factory HK416 uppers. As shown, it does have a few dings but nothing crazy. It consists of the following parts
-MR556 Upper Receiver -MR556 BCG -HK416C 9in barrel assembly -Vented gas block with sling loops -HK416 Mlok rail -Radian Raptor LT CH -I'll probably swap the muzzle device to a Surefire closed tine FH to sell it. It currently has a Griffin Armament flash hider. -Brownells BRN-4 lower -Geissele HK416 trigger -UCIW Buffer tube -Heavybuffers Heavy uciw buffer -SBA3 brace cut down  Attached FileOnly interested in the value for the gun, not the optic. |
|
|
|
|
Posted: 7/21/2020 4:16:22 PM EDT
[#7]
For the M4A1 clone guys... Any idea what real .gov UID tags are worth?
|
|
|
|
|
Posted: 7/21/2020 10:10:13 PM EDT
[#8]
This seems to be an appraisal thread without anyone who knows what shit is worth!
|
|
|
|
PA, USA
|
Posted: 7/23/2020 9:06:52 PM EDT
[Last Edit: ZiggyS]
[#9]
I bought this about a year ago and have never shot it, the gun has never been fired. When I purchased it did not have a box so I am unsure of the specific model number , though I believe it to be a colt le6920 from assault rifle ban era. (New old stock). If anyone knows exactly what model this is, and what it’s be worth if I sold it or what to look for on a trade with a gun shop that would be really helpful. I am a novice with these rifles, so any input is appreciated. Thanks in advance.
    Also. Can I shoot 5.56 out of these even though it’s stamped 223? They sold me 556 when I bought the gun, but I’m doubting that I can put 556 through it. Edit: not sure how to embed images here. Sorry. |
|
|
|
Posted: 7/27/2020 6:40:33 AM EDT
[Last Edit: M-4matus]
[#10]
Quote HistoryOriginally Posted By ZiggyS: I bought this about a year ago and have never shot it, the gun has never been fired. When I purchased it did not have a box so I am unsure of the specific model number , though I believe it to be a colt le6920 from assault rifle ban era. (New old stock). If anyone knows exactly what model this is, and what it’s be worth if I sold it or what to look for on a trade with a gun shop that would be really helpful. I am a novice with these rifles, so any input is appreciated. Thanks in advance. https://i.imgur.com/tiJmbeb.jpghttps://i.imgur.com/NctOSZw.jpg https://i.imgur.com/JwIzyey.jpg https://i.imgur.com/BMxE2nf.jpg Also. Can I shoot 5.56 out of these even though it’s stamped 223? They sold me 556 when I bought the gun, but I’m doubting that I can put 556 through it. Edit: not sure how to embed images here. Sorry. I'd be careful about shooting 5.56 if it were some new M855a1 EPR, too high of pressure, but realisticaly, 5.56 target ammo isn't going to damage a rifle that is in good working order. There are some great articles online about THE ACTUALLY REASON .223 differs from 5.56 and it isn't what most people think. 1) more powder in 5.56, higher pressure 2)and the dumbest, 5.56 is bigger. It's all about case size and chamber size. There is less room in your .223 chamber than your 5.56. Loading a slightly larger 5.56 shell in the .223 chamber MIGHT, theoretically can, cause increases in chamber pressure. But everyone needs to understand, this is not due to increases in powder in the .223 cartridge, but rather the .223 chamber is tighter. This is solely designed to increase accuracy. The concern should be do I have enough room to allow the shell to expand and contract properly. Physically check them. If you drop a round of 5.56 in your .223 chamber gently, it should come back out rather easily. The real head trip is that .223 Cartridges in a .223 Chamber can run as high or higher than a comparable 5.56 round in a 5.56 Chamber. That all depends on your ammo and more importantly, Your specific chamber size and or barrel Quality control is key. Lastly, you could have a Smith or even Armorer size the chamber see where it actually stands. Second to last, and I'm not a Colt Guru, but I don't recall seeing really any Colt AR's marked .223, might be fairly rare? |
|
|
|
|
Posted: 7/27/2020 9:44:55 AM EDT
[Last Edit: TGWLDR]
[#11]
Quote HistoryOriginally Posted By ZiggyS: I bought this about a year ago and have never shot it, the gun has never been fired. When I purchased it did not have a box so I am unsure of the specific model number , though I believe it to be a colt le6920 from assault rifle ban era. (New old stock). If anyone knows exactly what model this is, and what it’s be worth if I sold it or what to look for on a trade with a gun shop that would be really helpful. I am a novice with these rifles, so any input is appreciated. Thanks in advance. https://i.imgur.com/tiJmbeb.jpghttps://i.imgur.com/NctOSZw.jpg https://i.imgur.com/JwIzyey.jpg https://i.imgur.com/BMxE2nf.jpg Also. Can I shoot 5.56 out of these even though it’s stamped 223? They sold me 556 when I bought the gun, but I’m doubting that I can put 556 through it. Edit: not sure how to embed images here. Sorry. Govt or pencil profile bbl? AR 6520nor 6720, not a 6920 as no M203 cuts on bbl. Caliber markings on lower are irrelevant, how is the bbl stamped? About $1200-$1400 right now with the right buyer, given the current state of affairs. Some info on .223 vs 5.55 NATO HERE Eta: The .223 caliber designation on the lower receiver is not "rare". |
|
|
|
VA, USA
|
Posted: 8/9/2020 11:50:26 AM EDT
[#12]
How much should I expect to get from the sale of a Sig Sauer M400 Tread (5.56) with about 500 rounds through it?
Factory stock rifle, well kept, like new condition. Adds: inlcude Magpul MBUS (front and rear), a Magpul 90deg front grip, A3T Micro Red Dot ($99 red dot), 2 PMAG 30. Planning to sell to a local gun store.  Thanks! |
|
|
LA, USA
|
Posted: 8/24/2020 12:02:40 PM EDT
[#13]
1. Bushmaster Old Roll Mark A2 profile, new barrel (<500 rounds through)
2. Bushmaster New Roll Mark A4 Clone, Unfired with with KAC RAS. TIA |
|
|
PA, USA
|
Posted: 9/24/2020 3:29:54 AM EDT
[#14]
What's a the going price for a umbrella Corp bcg.
|
|
|
FL, USA
|
Posted: 10/6/2020 11:24:48 AM EDT
[#15]
Trying to get an honest price for this rifle, I know prices are higher then normal right now. Everything is FDE.
Upper / Lower: Aero Precision M4 LIBERTY edition. FDE Barrel : Faxon 16" overall Pencil Profile AR15 Barrel, 556 Nato w/ Integral Slim 3 Port Brake Trigger : CMC flat bow Handguard: AR*chitect 13.5" M•Lok BCG: ToolCraft 5.56 NATO M16 - Nitride (Titanium pin) Randoms : Strike Industries - Charging handle, 45* safety selector, takedown/pivot pins, dust cover. Magpul : BUIS / grip / MOE stock (all In FDE) Any input or opinions on this build is welcome, thanks. |
|
|
FL, USA
|
Posted: 10/30/2020 4:36:48 PM EDT
[Last Edit: Judgemax]
[#16]
Anyone have a handle on the market value of a like new Colt Government Model 6550 with bayo lug and flash hider GS 0004XXX? No box
|
|
|
MD, USA
|
Posted: 11/21/2020 12:33:35 PM EDT
[Last Edit: sailraven]
[#17]
First purchase here. Have only basic firearm experience and looking forward to becoming proficient.
Any input about the value of a Spikes in 300 built as a factory complete rifle in 2012, and presumably unfired (not sure how I can be sure of this), would be much appreciated. I likely overpaid and maybe should have started with a budget model. Only paperwork or verification I have is a confirmation from the company given the serial # that it was shipped as a rifle to a dealer in 2012. They told me that the build quality of older models is superior to many newer ones, though not sure this is true. It has a Spider lower SBR model (Spikes Battle Rifle not short-barrelled) ST LW-50 barrel with 1:8 twist Have only this one photo and should be able to get more next week.  Thank you! |
|
|
TN, USA
|
Posted: 11/30/2020 10:48:10 PM EDT
[Last Edit: Creekrobber]
[#18]
I have a Colt AR-15 A2 HBAR Sporter. Serial # 215***
Barrel is stamped C MP 5.56 NATO 1/7 HBAR. It’s in very nice condition. I would like to know a little about this rifle from all you experts. According to Colt’s website it was manufactured in 1972. No sear block and I think it may be a R6600, but not sure. Is this a sought after rifle and if so, what is a good asking price? Is it crazy accurate with the heavy barrel? Thanks so much for your time. |
|
|
GBR
|
Posted: 12/6/2020 7:31:25 AM EDT
[Last Edit: AlmostFinished]
[#19]
Custom Built LaRue Tactical AR. It was made as a gift for me, so I only have a rough idea of how much it is worth. It's barely been used and since I will be making the UK my permanent home, I'm looking to sell it. I don't know if this matters but it was built to be more friendly to vertically challenged people such as myself (5'2).
     
|
|
|
USA
|
Posted: 1/5/2021 6:25:19 PM EDT
[Last Edit: txnavalaviator]
[#20]
Redacted. Saw where this is for complete setups.
|
|
|
LA, USA
|
Posted: 3/12/2021 9:44:47 PM EDT
[#21]
Was at the pawn shop today and came across an older rollmarked Colt Law Enforcement Carbine. They wanted $1,700 for it. What do you think of the price? Good, bad, or an investment piece since CZ owns Colt now? It's unfired also (I checked the BCG and the barrel...squeaky clean).
|
|
|
|
Posted: 4/3/2021 1:06:23 PM EDT
[Last Edit: quest84]
[#22]
Oops
|
|
|
|
|
Posted: 4/8/2021 6:39:56 PM EDT
[Last Edit: gus]
[#23]
Hoping I can get a little help -
I need to know the approximate value of a Z-M Weapons LR-300SR rifle, complete rifle bought new by me. This rifle was sold as part of an AR15.com group buy around 2007 or so, and is marked "2 of 100". It is a direct gas impingement design but the recoil spring is located above the barrel around the gas tube, which allows a side folding stock. They were nearly $2k brand new, and have been out of production since 2007 when Para bought the company. Searching on all the auction sites as well as here on Arfcom gave me no results. An old post found on Google from 2016 or so seems to indicate a value of $5-7k for a complete mint rifle. Hoping someone here is in tune with current prices on these extremely rare rifles..... This one is as new with under 200 rounds fired, no blemishes or wear. The Aimpoint and mount are not included.    
|
|
|
|
|
Posted: 4/30/2021 5:31:09 PM EDT
[#24]
Colt M16A1 parts kit on NDS
What's this worth? Am I asking to much? https://www.ar15.com/forums/equipment-exchange/NDS-M16A1-clone-Colt-M16A1-parts-kit-installed-/21-2133307/  Attached File Attached File |
|
|
|
|
Posted: 6/4/2021 1:04:07 AM EDT
[Last Edit: BILLBO]
[#25]
Opps I am in the wrong place. Moving it.
|
|
|
|
|
Posted: 7/29/2021 11:07:37 AM EDT
[#26]
Local guy has a real clean Colt Sporter HBAR.
Serial is MH 027XXX. I think it was made around 1990. No box, just the rifle and 1 colt 20 round mag. But very clean. The prices seem to be all over the place the past year. Can anyone give me a current ball park value range on this? I would like to pick it up but at a fair price. Thanks. |
|
|
|
|
Posted: 7/29/2021 12:22:04 PM EDT
[#27]
Tag for interest. I have one a couple years newer than that, in really good shape, too.
|
|
|
|
TX, USA
|
Posted: 8/24/2021 2:05:06 AM EDT
[#28]
KAC SR15 Mod 0 Legacy Taupe. In today's market, what would this rifle go for, not including the Aimpoint? It's lightly used with a low round count in the 200's. As far as I know, is exactly the way it came from the factory. Thanks.
|
|
|
NC, USA
|
Posted: 8/30/2021 8:42:03 AM EDT
[#29]
Hi guys,
Just wandering what my Armalite M15 Competition 3Gun is worth? She has the 18" barrel. I've only put a couple mags thru her. I think I have like close to $1600 for her. But, I have also added a set of Magpul Pro Flip Up Sights. I'm just not sure what to price her at. Thanx!   
|
|
|
OH, USA
|
Posted: 9/9/2021 1:38:16 PM EDT
[#30]
Hey guys, got this in a trade and was hoping to find a price and maybe a buyer. It’s a Surefire FH556-217A “SCAR L”. It’s 1/2x28 and basically the gen 1 four prong for the Scar 16.
It works as should just a little worn. More pictures if you need them, thanks for any help! https://imgur.com/a/VLY8wH9 |
|
|
USA
|
Posted: 9/10/2021 4:06:09 PM EDT
[Last Edit: Radiant]
[#31]
delete
|
|
|
|
Posted: 10/22/2021 4:56:16 PM EDT
[Last Edit: DocApocalypse]
[#32]
Thinking about selling this one. BCM lower with Doublestar Nitride barreled upper. 5.56. Probably no more than 300 rounds through it. I bought it back from a friend that I know never shot it.
I'm not giving up the MOE handguard or B5 Bravo stock with it. It will have standard fat M4 handguards and waffle stock when I sell it. Of course I'm not giving up the optic either but I will leave the Magpul MBUS.  Attached File |
|
|
|
|
Posted: 11/1/2021 5:29:31 PM EDT
[Last Edit: Will816]
[#33]
It's not looking like this thread gets much action but figured I'd throw something out. This is my wife's LE6920-OEM1 2013 Configuration rifle with original box in hand. Less than 500 rounds. She has her eye on a Geissele 14.5" OD Super Duty for $1700 NIB locally and I feel like her Colt could possibly get 60-70% of the way there. We'll probably get the Geissele no matter what and sell the Colt only if it's a net gain based on what we've put into it.
Lower: "M4 CARBINE" and LE45XXXX serial number QR code No keyhole on lower (I had another 6920 from that time period that had the keyhole forge mark on the ejection side of the magwell) "SAFE/FIRE" rolled on both sides Upper: "C" stamped upper with Brass Aluminum (square) forge mark "C" stamped carrier with "MPC" bolt Cage code barrel Modifications: Dremeled down the FSB and installed a MI free float quad rail Magpul OD furniture QD receiver endplate The sights, optic, light, IR laser, and SF3P would not be included (I'd re-install an A2 with new crush washer). So, what does the hive mind think?  LE6920 by Will5B, on Flickr LE6920 by Will5B, on Flickr LE6920 by Will5B, on Flickr LE6920 by Will5B, on Flickr LE6920 by Will5B, on Flickr
|
|
|
|
|
Posted: 11/24/2021 2:39:04 AM EDT
[Last Edit: Tejas1836]
[#34]
|
|
|
|
|
Posted: 1/24/2022 3:42:06 PM EDT
[Last Edit: DocApocalypse]
[#35]
Wrong thread.
|
|
|
|
|
Posted: 1/31/2022 9:39:02 PM EDT
[#36]
Original ARFcom Special Edition Black Rifle AR10B, NIB
Issued during the AWB days, it has a pinned stock and muzzle brake. Factory accessories include a short magazine but I will offer modified mags and kits to modify more, with the rifle.   Should be worth a bit more than an AR10 to SEBR collectors. Original Offering thread: ARFcom AR10 SEBR deal |
|
|
|
|
Posted: 2/23/2022 12:00:22 AM EDT
[Last Edit: AKARS]
[#37]
Where would I go to get an appraisal on a NIB blue label Colt Law Enforcement Carbine LE6920 ? Any ideas ? Thanks
I see prices all over the place on these. This model has the carry handle, Colt M4 style buttstock, small pin, 16 carrier, and is LEO marked. |
|
|
|
|
Posted: 4/30/2022 5:31:04 PM EDT
[Last Edit: Blanco_Diablo]
[#38]
Moved.
|
|
|
|
MP, USA
|
Posted: 5/10/2022 9:30:35 PM EDT
[Last Edit: JoshNC]
[#39]
Wrong section. Sorry. Mods please delete.
|
|
|
MP, USA
|
Posted: 5/10/2022 9:31:22 PM EDT
[#40]
Quote HistoryOriginally Posted By AKARS: Where would I go to get an appraisal on a NIB blue label Colt Law Enforcement Carbine LE6920 ? Any ideas ? Thanks I see prices all over the place on these. This model has the carry handle, Colt M4 style buttstock, small pin, 16 carrier, and is LEO marked. Around $1500-$1800. |
|
|
LA, USA
|
Posted: 6/4/2022 11:55:38 PM EDT
[#41]
What is the value of Tom Sawyer Manufacturing Jolly Roger lower ?
|
|
|
UT, USA
|
Posted: 6/6/2022 6:00:12 PM EDT
[#42]
NIB Noveske ghetto blaster pistol chambered in 5.56 with the ghetto blaster rollmark, bazooka green.
|
|
|
LA, USA
|
Posted: 6/6/2022 7:56:42 PM EDT
[#43]
What is the value of Tom Sawyer Manufacturing Jolly Roger lower ?
|
|
|
|
Posted: 6/12/2022 10:02:19 AM EDT
[#44]
What’s this dusty old relic worth?
  
|
|
|
|
AR, USA
|
Posted: 7/9/2022 9:34:39 AM EDT
[#45]
Looking at a couple higher priced AR’s and curious what the value is on then.
First is a sig 556 that has a Swiss 551 barrel upgrade.   Second is a Christensen arms Recon CA-15  
|
|
|
MO, USA
|
Posted: 7/9/2022 9:49:39 AM EDT
[#46]
How much is a 16" Adams Arms 5.45 piston upper worth? Its their railed gas block kit with an original Magpul MOE handguard. Would come with an original style C Products mag and some Hornady 5.45 as well. I think it has around 2000 rounds or so through it. Not sure if its worth selling or changing it to 5.56 and just having a fun piston upper instead.
|
|
|
SC, USA
|
Posted: 7/14/2022 4:02:21 PM EDT
[#47]
I recently ran across a Colt A2 Sporter II and called colt to get any history they could provide. It’s an R6500 from 1985 in 95% or better condition. I do not have a box. I can give more details if needed but curious as to a rough value and whether or not it’s worth getting an archive letter from Colt as my understanding these aren’t quite as common as other models. Any help is greatly appreciated.
|
|
|
|
Posted: 8/1/2022 1:24:04 PM EDT
[#48]
Why is this thread tacked?
Nobody ever replies, and I totally understand why. |
|
|
|
|
Posted: 8/12/2022 12:53:16 PM EDT
[#49]
A buddy got this in an estate sale. He thinks it's worth about 1500 - is he right?
 Attached File Attached File Attached File |
|
|
|
|
Posted: 8/24/2022 12:02:32 AM EDT
[#50]
Quote HistoryOriginally Posted By armoredman: A buddy got this in an estate sale. He thinks it's worth about 1500 - is he right? https://www.ar15.com/media/mediaFiles/360589/20220812_091416_2_jpg-2486347.JPG https://www.ar15.com/media/mediaFiles/360589/20220812_091442_2_jpg-2486348.JPG https://www.ar15.com/media/mediaFiles/360589/20220812_091422_2_jpg-2486349.JPG I think 1500.00 is a bit low for a Delta HBAR, they are highly collectible, in my opinion it's worth nearly twice that maybe $2500.00 to $2800.00 |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
