User Panel
Posted: 2/19/2016 2:12:26 AM EDT
I have a feeling that I am going to take a beating on this post. Anyway, I am looking to get a high end DI rifle and have narrowed it down to the KAC SR15 mod2 and the LWRC Di. I doubt that it matters between the two rifles however, I plan to use it with a SilencerCo Omega can after my stamp comes back. Just looking for some opinions between these two rifles. Thanks in advance.
|
|
Not sure what LWRC brings to the table in terms of advancing the AR-15 design but I will say that KAC is one that I consider to be innovative if that makes a difference.
I'd go with the SR-15 |
|
|
I have a fair amount of Knight's gear, and nothing from LWRC. That being said, I actually like LWRC's lower more than the KAC. Having the bolt hold open and release on the right side is an advantage over just being able to drop the bolt.
|
|
Aside from the religious fervor associated with the brands mentioned, I doubt you'll notice much of a performance difference between those two rifles. Maybe comes down to a decent price difference...or...got a coin?
|
|
|
I'll say what pretty much everyone told me on here when I was deciding "KAC vs brandX"....
If you have the money to spend, GET A KAC! I followed that advice and I haven't regretted it yet. I also paid full retail for my mod 2. You can get it for under 2k now. It's a no-brainer...KAC all day. |
|
Have you ever shot a KAC? I'd ask you if you ever shot an LWRC DI gun, but if you've shot any other AR, you've shot the LWRC DI.
I'll ask you again, have you ever shot a KAC? People on here who bash KAC for proprietary parts and high price tag more than likely haven't fired one. If KAC is part of the question, it's always the answer. Proprietary parts don't matter if they never fail. |
|
I have not shot either the KAC or LWRC DI. I own 3 LWRCs piston guns. Not sure how the LWRC DI system stacks up against other manufacturers of the same quality. I have yet to see anything negative about KAC at all. I've held a KAC and it is a nice weapon. Quality build. If you have the chance to hold both, I suggest you do and you'll see which one feels better in your hands.
|
|
Thanks for all the feedback guys.
I am going to my local dealer tomorrow. He stocks both LWRC and KAC. I had a LWRC piston gun and I really liked the lower a lot. I just couldn't justify the added weight of the piston system for the advantages that it offered. Well that and it had a pinned FH that I was afraid to have cut off so I sold the gun. I have heard nothing but good about the KAC SR15 so that is what prompted the decision between these two. I would say I am leaning pretty heavily toward the KAC at this point. I am anxious to see them side by side tomorrow. |
|
Quoted:
Heavier rifles that is what they bring. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Not sure what LWRC brings to the table in terms of advancing the AR-15 design but I will say that KAC is one that I consider to be innovative if that makes a difference. I'd go with the SR-15 Heavier rifles that is what they bring. Are you sure you're not thinking of the piston LWRC models? They are heavier than most DI rifles. Their new DI line is basically what most other good DI rifles weigh. I have an LWRC M6A2-S piston model, and it is heavier. Unless the price difference is way, way out of whack to where it might make a fiscal issue for the OP, you can't get hurt with either rifle. KAC is good stuff. OP, did I miss any pricing info on these two rifles? |
|
I have a lwrc and really enjoy it. Never shot a KAC so can't compare. What are the prices like between the two? I they are fairly close do what the other guy said, go hold one and see which feels better. Can't go wrong with either though.
|
|
Quoted:
Mod2. If your holdup is between the ambi bolt catch or the right side bolt release, consider a Mod2 upper by itself and get one of the ambidextrous LWRC, Falkor, or ADM UIC lowers. My SR-15 E3 upper on an ADM UIC Duty lower with KAC trigger and ambi-sling endplate: https://c2.staticflickr.com/2/1472/24485417064_ca37bcec46_h.jpg https://c2.staticflickr.com/2/1531/24489231443_31517a85bc_h.jpg Alternatively, the new LMT MARS has a right side bolt catch as well, and all you'd "need" to do is put a good trigger in it. It looks very SR-15ish. View Quote Thanks for the input. I am always amazed at how many AR offerings are out there. I have never seen the ADM UIC lowers before. I very nearly ordered a Falkor receiver set just a few weeks ago but ended up going with a Rainier Mod 3 set. That is for another build though. I don't require the right side bolt catch however, it is a nice feature. |
|
Quoted:
Are you sure you're not thinking of the piston LWRC models? They are heavier than most DI rifles. Their new DI line is basically what most other good DI rifles weigh. I have an LWRC M6A2-S piston model, and it is heavier. Unless the price difference is way, way out of whack to where it might make a fiscal issue for the OP, you can't get hurt with either rifle. KAC is good stuff. OP, did I miss any pricing info on these two rifles? View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Not sure what LWRC brings to the table in terms of advancing the AR-15 design but I will say that KAC is one that I consider to be innovative if that makes a difference. I'd go with the SR-15 Heavier rifles that is what they bring. Are you sure you're not thinking of the piston LWRC models? They are heavier than most DI rifles. Their new DI line is basically what most other good DI rifles weigh. I have an LWRC M6A2-S piston model, and it is heavier. Unless the price difference is way, way out of whack to where it might make a fiscal issue for the OP, you can't get hurt with either rifle. KAC is good stuff. OP, did I miss any pricing info on these two rifles? You can get the LWRC for $1,400 if you look hard, so the prices are pretty different. |
|
if you happen to be anywhere close to the fort myers/naples area you're more than welcome to take my mod 2 for a spin and see if you want to go down that path. This goes for anyone actually
20150910_174503_zpsfmcidrku_edit_1441923400722_zps8uun5jzz by 03scgt, on Flickr |
|
Quoted:
if you happen to be anywhere close to the fort myers/naples area you're more than welcome to take my mod 2 for a spin and see if you want to go down that path. This goes for anyone actually View Quote I'll put out the same offer for anyone in Eastern Washington that hasn't had the pleasure of shooting a KAC SR-15 Mod 2. Hit me up, we will go to the range together and I'll make a believer out of you! Knights by scott gajdos, on Flickr |
|
|
Quoted:
if you happen to be anywhere close to the fort myers/naples area you're more than welcome to take my mod 2 for a spin and see if you want to go down that path. This goes for anyone actually <a href="https://flic.kr/p/xvT1yK" target="_blank">https://farm1.staticflickr.com/566/20685190803_9e62ba3b1a_h.jpg</a>20150910_174503_zpsfmcidrku_edit_1441923400722_zps8uun5jzz by 03scgt, on Flickr View Quote Damn! I'm there a few times a year visiting friends. He's a gun guy, she let's him be. |
|
KAC will have the best resale value of any civilian AR15 out there. And KAC is the best, IMO
|
|
I've got an 11.5, Mod 1, and SR-25 in Centralish Southish Texas that I'd gladly allow a perspective buyer come try out.
|
|
Quoted:
I'll put out the same offer for anyone in Eastern Washington that hasn't had the pleasure of shooting a KAC SR-15 Mod 2. Hit me up, we will go to the range together and I'll make a believer out of you! <a href="https://flic.kr/p/BoBdoe" target="_blank">https://farm6.staticflickr.com/5722/23228320369_62805a85de_b.jpg</a>Knights by scott gajdos, on Flickr View Quote View All Quotes View All Quotes Quoted:
Quoted:
if you happen to be anywhere close to the fort myers/naples area you're more than welcome to take my mod 2 for a spin and see if you want to go down that path. This goes for anyone actually I'll put out the same offer for anyone in Eastern Washington that hasn't had the pleasure of shooting a KAC SR-15 Mod 2. Hit me up, we will go to the range together and I'll make a believer out of you! <a href="https://flic.kr/p/BoBdoe" target="_blank">https://farm6.staticflickr.com/5722/23228320369_62805a85de_b.jpg</a>Knights by scott gajdos, on Flickr This is the only other Mod 1/2 16" rifle I've seen with an Acog, I approve! |
|
Quoted:
This is the only other Mod 1/2 16" rifle I've seen with an Acog, I approve! View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
if you happen to be anywhere close to the fort myers/naples area you're more than welcome to take my mod 2 for a spin and see if you want to go down that path. This goes for anyone actually I'll put out the same offer for anyone in Eastern Washington that hasn't had the pleasure of shooting a KAC SR-15 Mod 2. Hit me up, we will go to the range together and I'll make a believer out of you! <a href="https://flic.kr/p/BoBdoe" target="_blank">https://farm6.staticflickr.com/5722/23228320369_62805a85de_b.jpg</a>Knights by scott gajdos, on Flickr This is the only other Mod 1/2 16" rifle I've seen with an Acog, I approve! Well then you haven't seen enough SR-15s!!! |
|
Quoted:
Well then you haven't seen enough SR-15s!!! http://i81.photobucket.com/albums/j234/bionic589/NFA%20Items/IMG_7417.jpg View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
if you happen to be anywhere close to the fort myers/naples area you're more than welcome to take my mod 2 for a spin and see if you want to go down that path. This goes for anyone actually I'll put out the same offer for anyone in Eastern Washington that hasn't had the pleasure of shooting a KAC SR-15 Mod 2. Hit me up, we will go to the range together and I'll make a believer out of you! <a href="https://flic.kr/p/BoBdoe" target="_blank">https://farm6.staticflickr.com/5722/23228320369_62805a85de_b.jpg</a>Knights by scott gajdos, on Flickr This is the only other Mod 1/2 16" rifle I've seen with an Acog, I approve! Well then you haven't seen enough SR-15s!!! http://i81.photobucket.com/albums/j234/bionic589/NFA%20Items/IMG_7417.jpg Haha I've seen a lot, glad to see another setup the same way. Nice boom stick! |
|
Quoted:
Well then you haven't seen enough SR-15s!!! http://i81.photobucket.com/albums/j234/bionic589/NFA%20Items/IMG_7417.jpg View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
if you happen to be anywhere close to the fort myers/naples area you're more than welcome to take my mod 2 for a spin and see if you want to go down that path. This goes for anyone actually I'll put out the same offer for anyone in Eastern Washington that hasn't had the pleasure of shooting a KAC SR-15 Mod 2. Hit me up, we will go to the range together and I'll make a believer out of you! <a href="https://flic.kr/p/BoBdoe" target="_blank">https://farm6.staticflickr.com/5722/23228320369_62805a85de_b.jpg</a>Knights by scott gajdos, on Flickr This is the only other Mod 1/2 16" rifle I've seen with an Acog, I approve! Well then you haven't seen enough SR-15s!!! http://i81.photobucket.com/albums/j234/bionic589/NFA%20Items/IMG_7417.jpg That is one hell of a setup. I need to get an ACOG at some point. |
|
Quoted:
Thanks for the input. I am always amazed at how many AR offerings are out there. I have never seen the ADM UIC lowers before. I very nearly ordered a Falkor receiver set just a few weeks ago but ended up going with a Rainier Mod 3 set. That is for another build though. I don't require the right side bolt catch however, it is a nice feature. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Mod2. If your holdup is between the ambi bolt catch or the right side bolt release, consider a Mod2 upper by itself and get one of the ambidextrous LWRC, Falkor, or ADM UIC lowers. My SR-15 E3 upper on an ADM UIC Duty lower with KAC trigger and ambi-sling endplate: https://c2.staticflickr.com/2/1472/24485417064_ca37bcec46_h.jpg https://c2.staticflickr.com/2/1531/24489231443_31517a85bc_h.jpg Alternatively, the new LMT MARS has a right side bolt catch as well, and all you'd "need" to do is put a good trigger in it. It looks very SR-15ish. Thanks for the input. I am always amazed at how many AR offerings are out there. I have never seen the ADM UIC lowers before. I very nearly ordered a Falkor receiver set just a few weeks ago but ended up going with a Rainier Mod 3 set. That is for another build though. I don't require the right side bolt catch however, it is a nice feature. When my wife and I were on our honeymoon last year, we went to Kalispell and Whitefish and Glacier National Park up in Montana. While we were driving down into Kalispell one day, she mentioned a building with a gun on it, and when we were headed that way again the following day, we stopped in and spoke to the VP of sales at SI-Defense, which is also Falkor. I got to handle one of their guns with the Proof Research barrel and Fortis Switch rail and I can say confidently that I will have one of their receiver sets also. It was a very nice gun for sure. |
|
Quoted:
Well then you haven't seen enough SR-15s!!! http://i81.photobucket.com/albums/j234/bionic589/NFA%20Items/IMG_7417.jpg View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
if you happen to be anywhere close to the fort myers/naples area you're more than welcome to take my mod 2 for a spin and see if you want to go down that path. This goes for anyone actually I'll put out the same offer for anyone in Eastern Washington that hasn't had the pleasure of shooting a KAC SR-15 Mod 2. Hit me up, we will go to the range together and I'll make a believer out of you! <a href="https://flic.kr/p/BoBdoe" target="_blank">https://farm6.staticflickr.com/5722/23228320369_62805a85de_b.jpg</a>Knights by scott gajdos, on Flickr This is the only other Mod 1/2 16" rifle I've seen with an Acog, I approve! Well then you haven't seen enough SR-15s!!! http://i81.photobucket.com/albums/j234/bionic589/NFA%20Items/IMG_7417.jpg Looks very nice. My KAC should be coming in next weekend, and when all is said and done will look exactly like that one. Except I will probably keep the A2 grip on it. |
|
Quoted:
I just wanted to thank everyone for the input. I ended up getting the KAC this morning. They didn't have an LWRC Di gun to compare it to but I took the piston and op rod out of one to get a closer feel between the two. The Knights felt way better balanced. I still like the LWRC and might get one down the road but the KAC won out this time. Here she is with my BCM. http://i458.photobucket.com/albums/qq301/whitestang04/Mobile%20Uploads/IMG_20160220_211320463_zpssfedkjlb.jpg View Quote Congrats...Keep us posted once you get some rounds through her to give us you thoughts.. |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.