User Panel
Posted: 3/16/2014 2:38:14 AM EDT
[Last Edit: Lancelot]
When discussing the Mk 18 / CQBR program, we can divide the history and discussion in to two distinct categories: 1) The weapon system itself / upper receiver supplied and 2) the group of accessories deployed on said weapon systems (SOPMOD).
---------- Mk 18 Mod 0 / CQBR The M4 carbine and M16 are not ideally suited for all missions, so it was proposed that the modularity of the M16 series would allow a user to replace the upper receiver of an existing weapon with one more suitable to the task. One of two proposed special mission receivers that were planned for inclusion into the SOPMOD Block II kit, the CQBR has taken off on its own. Like the proposed Special Purpose Receiver, the Close Quarters Battle Receiver has been more or less taken on by the Naval Surface Warfare Center, Crane Division (often referred to as NSWC-Crane or just "Crane") as its own project following the CQBR's removal from the SOPMOD program. Just as the Special Purpose Receiver morphed into the Special Purpose Rifle, and was type-classified as Mk 12 Mod 0/1, the complete CQBR-equipped carbine has been type-classified as the Mk 18 Mod 0. The purpose of the CQBR remains to provide operators with a weapon of submachine gun size, but firing a rifle cartridge, for scenarios such as VIP protection, urban warfare, and other close quarters battle (CQB) situations. The CQBR is designed to provide improvement over previous AR-15/M16-type weapons in this category. The CQBR is usually issued as a complete weapon system, and not just an upper receiver. The CQBR was once only available to Naval Special Warfare units, but the Mk 18 Mod 0 has become general issue for Visit, Board, Search, and Seizure (VBSS) missions and, as of 2006, for NCIS agents deploying to active combat zones.[citation needed] The Mk 18 is also used by the Coast Guard's Tactical Law Enforcement Teams, Maritime Safety and Security Teams, and Maritime Security Response Team and the United States Navy's Explosive Ordnance Disposal (EOD) Operators. Wikipedia has a good article with sources on the original CQBR/Mk 18 Mod 0 and its development. ---------- SOPMOD The SOPMOD Program Management Office at NSWC Crane, IN, provides standardized, versatile weapons accessories to meet needs across SOF mission scenarios. These accessories increase operator survivability and lethality by enhanced weapon performance, target acquisition, signature suppression, and fire control. The CQBR itself was originally part of the SOPMOD program as an accessory replacement upper receiver for the M4. However it was eventually separated out into its own project. SOPMOD accessories for the M4/CQBR originally included things like the KAC RIS/RAS, SOPMOD stock, KAC M4QD suppressor, AN/PEQ-2 illuminator/laser, ECOS-N red dot, ACOG, etc The SOPMOD program has gone through multiple minor and major evolutions throughout its lifetime. The most significant is commonly defined as "Block II" and included the introduction/replacement of accessories that met the updated needs of operators. The most visually significant "Block II" accessory is probably the replacement of the KAC rail/FSB with the Daniel Defense RIS II free float rail with low-profile gas block. Other updates include things like the Surefire SOCOM sound suppressor, EOTech RDS (553/SU-231 & EXPS 3-0/SU-231a), LA-5/PEQ ATPIAL, etc ---------- Link to docs and photo albums Presentation on CQBR from Crane Operator's Manual for Mk 18 Mod 0 SOPMOD Program Overview presentation from Crane Photo Album of Mk 18 Mod 0 Photo Album of CQBR with SOPMOD Block II accessories ---------- Because of the long history of both the CQBR/Mk 18 and SOPMOD programs, it's common to find weapons with various mixed configurations in the field, all depending on what time and unit the weapon system belongs to. Below are a few examples with descriptions to illustrate this. Example of a Mk 18 Mod 0 in as-issued configuration including: M16A1 surplus lower receiver, SOPMOD buttstock, KAC RIS, KAC M4QD flash hider, Aimpoint Comp M2 in Wilcox mount, LMT rear fixed sight, CQD rear sling plate. NSW Operator CQBRs with original SOPMOD accessories including KAC M4QD sound suppressor and AN/PEQ-2 IR Illuminator/Laser. Member of a Combat Camera team with a CQBR with KAC RAS and M4QD flash hider but with other updated accessories from the "Block II" SOPMOD kit including SU-231a (EOTech EXPS 3-0), EOTech G33 Magnifier, LA-5/PEQ ATPIAL, Insight WMX-200. Good example of "early" CQBR with SOPMOD Block II accessories including SU-231 (EOTech 553) and SU-233 (Insight M3x weaponlight). Example of a more "modern" CQBR with SOPMOD Block II accessories including the updated SU-231a (EOTech EXPS 3-0) and Insight WMX-200 weaponlight. Many times certain configurations are common within certain branches/groups. Here a Marine Raider is seen with a CQBR with an AN/PEQ-16 (USMC issued vs. the LA-5/PEQ SOCOM issued ATPIAL) and KAC NT4 suppressor (vs. the current Surefire SOCOM suppressor). ---------- Building a clone If you're interested in building a "clone" of a Mk 18 or CQBR equipped M4A1, here is a basic parts list to use as a guide and get you started. This list is not exhaustive and see the * note above regarding personalized accessories. | Mk 18 Mod 0 | M4A1 CQBR Block I | M4A1 CQBR Block II Lower Receiver | Mil-spec forged A1 | Mil-spec forged A2 | Mil-spec forged A2 Stock | Gen 1 SOPMOD (Black) | M4, CAR, SOPMOD, CTR & others | M4, CAR, SOPMOD, CTR & others Pistol Grip | A1 | A2, ERGO & others | A2, ERGO & others Rear Sling Plate | CQD | CQD | CQD Upper Receiver | Mil-spec forged M4 profile | Mil-spec forged M4 profile | Mil-spec forged M4 profile Barrel | 10.3" | 10.3" | 10.3" Rail | KAC RIS | KAC RAS | DD Mk18 RIS II (FDE) Rear BUIS | LMT Fixed | LMT Fixed, MATECH, & others | MATECH, KAC 300m, & others Front Sight | A2 FSB | A2 FSB | KAC 99051 BUIS (Taupe) Front Sling Attachment | FSB Sling Swivel | FSB Sling Swivel | CQD Muzzle Device | KAC M4QD | KAC M4QD | SureFire FH-556-RC Supressor | None | KAC QDSS NT4 | SureFire SOCOM556-RC (FDE) LAM | None | PEQ-2 | LA-5 Weaponlight | SureFire M962 | SureFire M952, M962 | Insight M3X (Tan), Insight WMX200 (Bronze) Optic | Aimpoint Comp M2 in Wilcox Mount | Aimpoint Comp M2 in QRP Mount, ACOG | EOTech 553 (Tan), EOTech EXPS3-0 (Tan), ELCAN 1-4x (FDE) ---------- Link to previous threads Previous Mk 18 / CQBR Thread Part I Previous Mk 18 / CQBR Thread Part II |
|
|
Originally Posted By interfan:
It sounds pretty ghetto, but layers of aluminum foil on the pic rail work well to tighten up the base of the old 553 so the ARMS will grip. It’s an old trick that works with undersized rails or worn mounts. View Quote View All Quotes View All Quotes Originally Posted By interfan:
Originally Posted By Spooled:
Anyone have any recommendations for a riser that will work with pos arms levers? Would like one for use with my 553. had a knights long riser but the eotech didn't lock down tight enough. Edit: Old pic for top of page Attached File |
|
"My wife is in hell, where I sent her. She could make good biscuits, but her behavior was terrible." - Po Campo
|
Originally Posted By TigerHawk:
Does anyone know when KAC might be doing another run of 99051-taupe sights? Seems they are out of stock everywhere. View Quote 99051-Taupe |
|
|
Originally Posted By AR_Marv: Not sure if you're still looking but just got an email from operation parts that they have them in stock. They show 12 in stock. Never bought from them but I see there an industry partner. 99051-Taupe View Quote I've ordered various items from OP in the past and they're GTG. |
|
I'm just here for the Dillo Dust
|
I control my guns just fine on my own, thanks.
USA
|
Yep there was a point in time where we all got our 99051's (and Mk12 thread all got their FF RAS') from operation parts. Good to go
|
Colt the rifles and super sport the motorcycles
|
Not a bad day today. The mailbox was stuffed when I got home. Had a colt fiber lite (n1), colt complete bcg, bikini for my Acog, and DD ris barrel nut wrench. Just waitin on a new standard barrel nut wrench to arrive and I'll be in business with my mod1. I have an upper ready to go for my cutdown m4 ris, but I'm still in the market for a mk18 ris ii Fde. One offer I had fell through not too long ago and the last one I had my eye on, sold. If anyone is lookin to move one, msg me. I'll take anything, new, used, beat to hell (priced accordingly of course). Id kinda like to find a more used one since I plan to paint. I know if I get a newer one I'll end up getting 2, one kept natural Fde, and one to paint.
|
|
|
View Quote |
|
|
Originally Posted By Dyzastr:
Nice. I definitely can see it better now. How do you like havin the aimpoint on an offset? Does it feel bulky at all? It also feels pretty natural to transition to offset back ups. The ta31-Ecos is what I have set up currently and with some practice it becomes fairly easy to transition between 4x and cqb, but it's not as natural as the pivot to offset imo. View Quote View All Quotes View All Quotes Originally Posted By Dyzastr:
|
|
|
I'll see myself out.....
|
|
|
Got shipment notification for my FDE Elcan 1-4x 556 - Kerif custom ordered one for me with the old style battery With used ones going for $1800-2000 I figured why not just spend a bit more and get a new one. Had one before and gave it up, and have regretted it ever since.
|
|
---
NRA Life Member USN Retired |
^ noice. One day I hope to join the elcan ranks. For now, Acog, eo, and aimpoint will have to suffice.
|
|
|
Originally Posted By 78Staff:
Got shipment notification for my FDE Elcan 1-4x 556 - Kerif custom ordered one for me with the old style battery With used ones going for $1800-2000 I figured why not just spend a bit more and get a new one. Had one before and gave it up, and have regretted it ever since. View Quote |
|
|
Originally Posted By 78Staff:
Got shipment notification for my FDE Elcan 1-4x 556 - Kerif custom ordered one for me with the old style battery With used ones going for $1800-2000 I figured why not just spend a bit more and get a new one. Had one before and gave it up, and have regretted it ever since. View Quote |
|
|
|
|
very nice!
|
|
|
I control my guns just fine on my own, thanks.
USA
|
Originally Posted By AZ_SBR:
Because cloning. https://farm5.staticflickr.com/4785/40154273094_4cec2e15b3_c.jpg View Quote |
Colt the rifles and super sport the motorcycles
|
Originally Posted By AZ_SBR:
Because cloning. https://farm5.staticflickr.com/4785/40154273094_4cec2e15b3_c.jpg View Quote |
|
"My wife is in hell, where I sent her. She could make good biscuits, but her behavior was terrible." - Po Campo
|
Originally Posted By AZ_SBR:
Because cloning. https://farm5.staticflickr.com/4785/40154273094_4cec2e15b3_c.jpg View Quote |
|
Practice, the master of all things. - Augustus
|
---
NRA Life Member USN Retired |
Originally Posted By AZ_SBR: Thanks! Not yet. Just received it in the mail Thurs. Was also considering... NFA TAX PRO 2A Side note: attended the Luke Days 2018 at Luke AFB today. It was rad! Pics over in the Hometown > Arizona forum. But here are two pics just because you can never have too much Warthog... https://farm1.staticflickr.com/821/40162705124_f61f2f484a_c.jpg https://farm5.staticflickr.com/4773/40829445062_64851998c7_c.jpg View Quote |
|
If U can't Truck It F!@k It!
|
|
Originally Posted By J_MONEY: What offset Scout mount is that? Edit: Think I found it http://jerkingthetrigger.com/blog/wp-content/uploads/2012/12/Low-Pro-Products-Scout-Light-Mount.jpg View Quote |
|
|
Originally Posted By MrKV:
https://s14.postimg.org/5f101ns2p/AB6_C9_D67-_AD0_E-4770-_A41_E-_CD6_F5498_BF17.jpg Got all the parts but no light Anyone else here order a m300 from IWC? Ordered on Wednesday, site says they ship in 24hrs View Quote |
|
|
Originally Posted By AZ_SBR: Thanks! Not yet. Just received it in the mail Thurs. Was also considering... NFA TAX PRO 2A Side note: attended the Luke Days 2018 at Luke AFB today. It was rad! Pics over in the Hometown > Arizona forum. But here are two pics just because you can never have too much Warthog... https://farm1.staticflickr.com/821/40162705124_f61f2f484a_c.jpg https://farm5.staticflickr.com/4773/40829445062_64851998c7_c.jpg View Quote |
|
Squire
Without blood, it doesn't count! I survived ARFbortion2016 and all I got was this stupid sigline |
Originally Posted By MrKV:
https://s14.postimg.org/5f101ns2p/AB6_C9_D67-_AD0_E-4770-_A41_E-_CD6_F5498_BF17.jpg Got all the parts but no light Anyone else here order a m300 from IWC? Ordered on Wednesday, site says they ship in 24hrs View Quote |
|
---
NRA Life Member USN Retired |
Originally Posted By MrKV:
https://s14.postimg.org/5f101ns2p/AB6_C9_D67-_AD0_E-4770-_A41_E-_CD6_F5498_BF17.jpg Got all the parts but no light Anyone else here order a m300 from IWC? Ordered on Wednesday, site says they ship in 24hrs View Quote However, Optics Planet takes the cake. I ordered my SR-07 remote and the corresponding tailcap Sunday, 3/11 and everything was in stock. However the items didn't ship until Thursday. Not only that, but they shipped one item USPS - scheduled to arrive Monday, 3/19, and the other FedEx - scheduled to arrive Wednesday, 3/21. Here's the best part: my father-in-law was visiting and wanted to buy two rifle scopes locally. I found them on Optics Planet for significantly cheaper and we used a 12% off coupon found here on ARFcom. We placed that order a few hours after my order on Sunday night and his scopes had shipped by Wednesday! I don't get it... |
|
|
Originally Posted By AZ_SBR: I ordered my M300 from IWC Monday, 3/12. I emailed Wednesday, 3/14 asking a question and after answering the question, he added that the light would be shipping that afternoon. I didn't get a shipping notification until Fri. They're in CO and I'm in AZ. It's supposed to be here Tuesday. Not a big deal, but definitely not 24 hour turnaround. However, Optics Planet takes the cake. I ordered my SR-07 remote and the corresponding tailcap Sunday, 3/11 and everything was in stock. However the items didn't ship until Thursday. Not only that, but they shipped one item USPS - scheduled to arrive Monday, 3/19, and the other FedEx - scheduled to arrive Wednesday, 3/21. Here's the best part: my father-in-law was visiting and wanted to buy two rifle scopes locally. I found them on Optics Planet for significantly cheaper and we used a 12% off coupon found here on ARFcom. We placed that order a few hours after my order on Sunday night and his scopes had shipped by Wednesday! I don't get it... View Quote |
|
|
Originally Posted By AZ_SBR: Thanks! Not yet. Just received it in the mail Thurs. Was also considering... NFA TAX PRO 2A Side note: attended the Luke Days 2018 at Luke AFB today. It was rad! Pics over in the Hometown > Arizona forum. But here are two pics just because you can never have too much Warthog... https://farm1.staticflickr.com/821/40162705124_f61f2f484a_c.jpg https://farm5.staticflickr.com/4773/40829445062_64851998c7_c.jpg View Quote |
|
|
Originally Posted By AZ_SBR: We've seen lots of A-10 activity the two separate times we've gone to visit the Pima Air & Space Museum. I guess there's an A-10 squadron stationed out of the base down there. As far as our visit to Luke yesterday, I did not see any F-16s; only F-15s and F-35s on display and a demo of the F-35s, which was awesome. https://farm1.staticflickr.com/807/40829462652_2da6742a5c_c.jpg View Quote |
|
|
Originally Posted By Tmender03:
I was at DM last year, but I haven't been to Luke since tech school in fall of 2004. Davis Monthan AFB has the most A-10's of any USAF base in the world. View Quote |
|
|
|
Originally Posted By Blackhawk5:
Shooting through a pipe with a brake. https://i.imgur.com/Hh4frS2.png a bit teeth chattering. View Quote |
|
Squire
Without blood, it doesn't count! I survived ARFbortion2016 and all I got was this stupid sigline |
Originally Posted By SecretSquirell:
I could only imagine. I shot at an indoor range for the 2nd time in my life last weekend and someone was letting off something that lit up the whole range and rattled my guts. View Quote Before I had a can, people would leave the stalls near me after half a mag |
|
|
Originally Posted By Alaska511:
10.3s without a can suck at the indoor range, even with a FH Before I had a can, people would leave the stalls near me after half a mag View Quote View All Quotes View All Quotes Originally Posted By Alaska511:
Originally Posted By SecretSquirell:
I could only imagine. I shot at an indoor range for the 2nd time in my life last weekend and someone was letting off something that lit up the whole range and rattled my guts. Before I had a can, people would leave the stalls near me after half a mag I even test drove the Rattler in 300BO with a can and that was still quite a pop indoors. |
|
Squire
Without blood, it doesn't count! I survived ARFbortion2016 and all I got was this stupid sigline |
Credit goes to DOGDRIVER for this.
View Quote |
|
Squire
Without blood, it doesn't count! I survived ARFbortion2016 and all I got was this stupid sigline |
|
|
|
Sorry if this is the wrong place to post, I have read around 800 pages of this thread over last years deployment and I know people get touchy about certain subjects that aren't 100% clone. So, since I don't have a strict clone I don't post much here. I am posting because I am trying to get an adjustable gas block for my Mk18 upper for my NT4 that is waiting on form 4. I was looking at the odin works but not sure if the hump for the set screw will fit under the rail. I would love a micromoa but as they are no longer made, I don't want to shell out $200 for some random guy's used one. I know a lot of you have the same rail, barrel, and suppressor and was wondering what you guys have tried, other than buying a whole new barrel to chop down for a smaller gas port. Unless anyone wants to let a govnah go for a decent price. Tiny, if this post is no good here, feel free to delete it. Sorry, I really do admire your guys' rifles, I am just not addicted enough(yet/thankfully) to form 1 a colt lower to replace my already sbr'd LMT, or swap out my ta31h for the correct reticle even though I have used an H on an issued m4 but not a cqbr. Thanks in advanced. Rifle in question so you can see it is somewhat close to a clone, but not 100% there. My rifle
|
|
|
Originally Posted By Dude59:
Sorry if this is the wrong place to post, I have read around 800 pages of this thread over last years deployment and I know people get touchy about certain subjects that aren't 100% clone. So, since I don't have a strict clone I don't post much here. I am posting because I am trying to get an adjustable gas block for my Mk18 upper for my NT4 that is waiting on form 4. I was looking at the odin works but not sure if the hump for the set screw will fit under the rail. I would love a micromoa but as they are no longer made, I don't want to shell out $200 for some random guy's used one. I know a lot of you have the same rail, barrel, and suppressor and was wondering what you guys have tried, other than buying a whole new barrel to chop down for a smaller gas port. Unless anyone wants to let a govnah go for a decent price. Tiny, if this post is no good here, feel free to delete it. Sorry, I really do admire your guys' rifles, I am just not addicted enough(yet/thankfully) to form 1 a colt lower to replace my already sbr'd LMT, or swap out my ta31h for the correct reticle even though I have used an H on an issued m4 but not a cqbr. Thanks in advanced. Rifle in question so you can see it is somewhat close to a clone, but not 100% there. My rifle View Quote |
|
Squire
Without blood, it doesn't count! I survived ARFbortion2016 and all I got was this stupid sigline |
Originally Posted By 78Staff:
Yep took almost 2 weeks to get mine from IWC... View Quote View All Quotes View All Quotes Originally Posted By 78Staff:
Originally Posted By MrKV:
https://s14.postimg.org/5f101ns2p/AB6_C9_D67-_AD0_E-4770-_A41_E-_CD6_F5498_BF17.jpg Got all the parts but no light Anyone else here order a m300 from IWC? Ordered on Wednesday, site says they ship in 24hrs Guess I'll hurry up and wait. |
|
|
Originally Posted By krdt:
Well, I finally have it. After a journey fraught with danger, hardship and unnecessary waiting... can you guys say: Gear Sector Slim Scout mount in FDE? :D! It only took about 3 months, a false start with a backordered regular GS mount and ordering from 3 different places, but it arrived Saturday. Gotta say, it's pretty snazzy. http://wkd.site.nfoservers.com/CQBR/CQBR.GS.070-02.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.GS.Slim-01.jpg Also, speaking of the BRT insert, I got to test mine out in the desert yesterday and was very pleased with the results. The old .080 port in my Noveske 10.5" was an annoying bitch and still not to my liking even with an H3 and Sprinco Red; I'm happy to report that now with the .070 insert, an H3 and standard carbine spring it shoots almost exactly like my .070 CQBR. I ran Wolf WPA 55gr, Wolf WPA 62gr HP and some 5.56 Hornady Black SBR 75gr all with zero issues. The felt recoil and ejection pattern was almost an exact mirror of my DD 10.3 .070, so I'd say mission accomplished :D. View Quote I am all over that insert! We are moving, so I have to wait until I set up the gun room in the new house When is your Form 1 coming for that lower!?!? I keep watching for you to put a Sopmod on that bitch! |
|
|
Originally Posted By Alaska511:
I like it! It would be hard to part with my off-colored coyote brown one, though I am all over that insert! We are moving, so I have to wait until I set up the gun room in the new house When is your Form 1 coming for that lower!?!? I keep watching for you to put a Sopmod on that bitch! View Quote View All Quotes View All Quotes Originally Posted By Alaska511:
Originally Posted By krdt:
Well, I finally have it. After a journey fraught with danger, hardship and unnecessary waiting... can you guys say: Gear Sector Slim Scout mount in FDE? :D! It only took about 3 months, a false start with a backordered regular GS mount and ordering from 3 different places, but it arrived Saturday. Gotta say, it's pretty snazzy. http://wkd.site.nfoservers.com/CQBR/CQBR.GS.070-02.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.GS.Slim-01.jpg Also, speaking of the BRT insert, I got to test mine out in the desert yesterday and was very pleased with the results. The old .080 port in my Noveske 10.5" was an annoying bitch and still not to my liking even with an H3 and Sprinco Red; I'm happy to report that now with the .070 insert, an H3 and standard carbine spring it shoots almost exactly like my .070 CQBR. I ran Wolf WPA 55gr, Wolf WPA 62gr HP and some 5.56 Hornady Black SBR 75gr all with zero issues. The felt recoil and ejection pattern was almost an exact mirror of my DD 10.3 .070, so I'd say mission accomplished :D. I am all over that insert! We are moving, so I have to wait until I set up the gun room in the new house When is your Form 1 coming for that lower!?!? I keep watching for you to put a Sopmod on that bitch! And, unfortunately, that won't be happening for a few more months. The SOCOM RC should be around April/May, the F1 on the lower should be around July assuming the average 6 month wait times on individual approvals holds. The check was cashed 01/17/18 on the F1. Maybe I will luck out and be one of those guys that gets a 4 month approval, but I doubt it :\. |
|
Practice, the master of all things. - Augustus
|
Originally Posted By krdt:
Almost tempted to throw my Colt N1 on it... probably will initially just for the sake of technicality - that's actually the OAL I used on the F1. Not to say I don't have a SOPMOD ready to go as well :D. And, unfortunately, that won't be happening for a few more months. The SOCOM RC should be around April/May, the F1 on the lower should be around July assuming the average 6 month wait times on individual approvals holds. The check was cashed 01/17/18 on the F1. Maybe I will luck out and be one of those guys that gets a 4 month approval, but I doubt it :\. View Quote View All Quotes View All Quotes Originally Posted By krdt:
Originally Posted By Alaska511:
Originally Posted By krdt:
Well, I finally have it. After a journey fraught with danger, hardship and unnecessary waiting... can you guys say: Gear Sector Slim Scout mount in FDE? :D! It only took about 3 months, a false start with a backordered regular GS mount and ordering from 3 different places, but it arrived Saturday. Gotta say, it's pretty snazzy. http://wkd.site.nfoservers.com/CQBR/CQBR.GS.070-02.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.GS.Slim-01.jpg Also, speaking of the BRT insert, I got to test mine out in the desert yesterday and was very pleased with the results. The old .080 port in my Noveske 10.5" was an annoying bitch and still not to my liking even with an H3 and Sprinco Red; I'm happy to report that now with the .070 insert, an H3 and standard carbine spring it shoots almost exactly like my .070 CQBR. I ran Wolf WPA 55gr, Wolf WPA 62gr HP and some 5.56 Hornady Black SBR 75gr all with zero issues. The felt recoil and ejection pattern was almost an exact mirror of my DD 10.3 .070, so I'd say mission accomplished :D. I am all over that insert! We are moving, so I have to wait until I set up the gun room in the new house When is your Form 1 coming for that lower!?!? I keep watching for you to put a Sopmod on that bitch! And, unfortunately, that won't be happening for a few more months. The SOCOM RC should be around April/May, the F1 on the lower should be around July assuming the average 6 month wait times on individual approvals holds. The check was cashed 01/17/18 on the F1. Maybe I will luck out and be one of those guys that gets a 4 month approval, but I doubt it :\. I like the N1, though. Works great with a C7 or irons. Fingers crossed, you may be lucky! I think I still hold the record for the longest F1 wait time in the MK18 thread |
|
|
Hey guys, so I remember seeing in this thread where to get the UID stickers, but for the life of me, I can't find that post again.
Got any leads? I just finally got a mk18 upper and I'm collecting stuff while I wait for it to arrive. Thanks! |
|
Proud Member of Team Ranstad
|
Originally Posted By Coronado:
Hey guys, so I remember seeing in this thread where to get the UID stickers, but for the life of me, I can't find that post again. Got any leads? I just finally got a mk18 upper and I'm collecting stuff while I wait for it to arrive. Thanks! View Quote ETA: Here's the guy selling them: https://carolinalaserworks.ecwid.com/ |
|
You're gonna need a bigger pot.
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.