User Panel
Quoted:
I dont understand why you didn't just send the barrel to ADCO in the first place and have it cut down to 10.3" and threaded, It would have only cost you $65 assuming you have the tools to pull the barrel yourself. And they would have drilled the gas port to the correct size free of charge +1 |
|
I think it is interesting, and screw the people complaining about the stamp, or sending it off. You had a beater upper and decided to try something, I don't get wtf everyone's problem is.
To the OP I think it is interesting, slow work with the gas port, but if you drill it eventually it will cycle. You can always drill more, but much harder if you drill too much. In the end if you totally dick it up and can't make it work, send it to ADCO and they will get it going for you. |
|
Quoted:
I'm not going to lie. That is gotta be one of the top 15 dumbest things I've seen someone do to a weapon.. At least hes out of the top 10 |
|
Quoted:
Quoted:
I'm not going to lie. That is gotta be one of the top 15 dumbest things I've seen someone do to a weapon.. At least hes out of the top 10 Better than my AK that ended up on a firearms blog. http://www.thefirearmblog.com/blog/2011/03/08/building-a-battlefield-pickup/ BTW, this is what it looks like today.... |
|
I can't wait to see some photos or video of you shooting this thing
Quoted:
OP dont explain anything to anybody about the tax stamp..all the bitches complaining about you not having a tax stamp..im glad they are not your neighbors you would already probably have the police at your door to see if you did have a tax stamp.....buisy body gun owners are the worst gun owners and people..they worry about everything but minding their own buisness.Nice weapons love the Browning .50.As far as the PUG thats one way to get the barrel down to 10 inches or to get the FSB off without having to unpin the flash hider Yup. It's really shocking how many people on here are busybody do-gooders |
|
Ya know, I dont think I posted this little project on here because I did not want to hear anybodies mouth but here goes.....
GLOCK CHOP..... It looks 100% better today, I got rid of the mag extension and took all the paint off of it. Note the messed up plastic around the pin holes.....it was because of this... http://www.youtube.com/watch?v=JoPZZrEeaMc |
|
your avatar should just be wile e. coyote.
in fact, the mods should change your screenname. |
|
I detect a theme with your paint jobs...
BTW, Nice Glock mod. When are you going to stipple it? |
|
I really dont think I am right away.
I've steepled enough of them and it gets boreing after a while, very time consuming. The 23 feels great (my buddy did that particular gun) but its a gen 3, I dont think I will like the profile of a gen 2 being steepled. |
|
I don't know if you're stupid, crazy, or a mad genius.
Kudos to you for having the guts to cut up guns like that. |
|
.....So this is what happens when you take: tools + guns + alcohol.
|
|
Cool PUG. I dig your style & creativity on your masterpieces.
|
|
Quoted:
Quoted:
I kinda thought the pic with the machine gun in the background ended the tax stamp deal... good show tailo Since we know your redneck ass can hillbilly up a colt and work a keyboard lets do something different. Make a video let's see if that dog can run Most redneck pic of the century........ http://img219.imageshack.us/img219/376/200903170015.jpg i used a 1919 on an AA tripod as a christmas tree one year. complete with candy canes in the barrel shroud holes. my son was pissed when we got a real tree the next year... |
|
Screw the busy bodies.
I still want to see a video of you shooting that thing. And making it work shouldn't be a problem. Heck you already have the hand drill |
|
|
Quoted:
Quoted:
Quoted:
I kinda thought the pic with the machine gun in the background ended the tax stamp deal... good show tailo Since we know your redneck ass can hillbilly up a colt and work a keyboard lets do something different. Make a video let's see if that dog can run Most redneck pic of the century........ http://img219.imageshack.us/img219/376/200903170015.jpg i used a 1919 on an AA tripod as a christmas tree one year. complete with candy canes in the barrel shroud holes. my son was pissed when we got a real tree the next year... lol OMG did you post a picture of that online? Ive seen it before.... |
|
Quoted:
I caught a lot of flak for this on another forum: http://i90.photobucket.com/albums/k252/chrisq_01/DSCF0396.jpg Personal taste is, well... Personal. Done a couple of those in the past to, left the cocking serrations black (lazyness and it looked cool) |
|
2011: The Pug.
An epic adventure of light and sound "Its fulls of stars. Literally, just read the casting list" - Siskel and Ebert. "i laughed till I cried" -some random american joe "Art like this is worth losing functional hearing in my left ear, dont forget who I married" - Bill Clinton |
|
Tailo, kudos to you.
Its your firearms, its your business. BUT putting up your AR-chop here in ARF is like going to a Prius meet with a Humvee and expect to be welcomed. |
|
Quoted:
Tailo, kudos to you. Its your firearms, its your business. BUT putting up your AR-chop here in ARF is like going to a Prius meet with a Humvee and expect to be welcomed. +1 to everything said here. It's your stuff, do as you please with it. It's not as if you chopped something extremely rare. ETA: But all that said, I can't help but wonder about the crown on that thing. |
|
Here we are on page 5 and I can't believe that no one has mentioned "Son's of Gun's"
This could be a industry game changer for season two! Tune into Discovery Channel this fall to see the full story on the PUG! |
|
Makes you think it would be something someone would do to a 20" upper during the AWB.
|
|
Meh. As long as it makes you happy, have at it. I'm sure it throws a fire ball like no other. Get some videos of that thing.
|
|
Hey, I broke the barrel on my toy M-16 right where you cut yours. Still had fun with it, even after I gave up trying to glue the barrel back on. Looking at your Pug brought back some fond memories, thanks!
|
|
SERIOUSLY I want to see a night video and the 6 foot long flame
|
|
Quoted:
I caught a lot of flak for this on another forum: http://i90.photobucket.com/albums/k252/chrisq_01/DSCF0396.jpg Personal taste is, well... Personal. Get rid of that nickel plated sissy pistol and get yourself a... oh, wait, that is a Glock eta: "That is the shiniest grenade I've ever seen" |
|
just a few questions .
what type of hacksaw frame is that? what type of blade did you use and what was the teeth per inch count ? and finally is your gunsmith shop named guns and anvil repair ? I cant really say a lot since I got frustrated and removed a rock river free float tube with a 24 inch pipe wrench . have fun and post vids when you have them. |
|
Got to the range today to find that my SD card was missing from my camera.....
BUT I had enough internal memory for ONE video..... Took another on my cell phone but I'll have to get on my laptop to put it on. The PUG lives and breathes fire. I was limited on time but I put 4 mags down it with out a hitch. As for accuracy, its not as good as my 11.5 but its good enough to hit a chest size target at 100 yards. I suspect with a proper crown job that it will do alittle better. To all the nay sayers that said it would not work http://www.youtube.com/watch?v=GeXgwbx79IQ |
|
this is great
i feel like i needed hearing protection just watching that video. haters gonna hate. |
|
You can barely see a decent sized flame coming out of that thing.
|
|
|
Bad Ass IMO. I hope I never get in a shootout in a bathroom stall, but you got it covered!
|
|
Quoted:
Got to the range today to find that my SD card was missing from my camera..... BUT I had enough internal memory for ONE video..... Took another on my cell phone but I'll have to get on my laptop to put it on. The PUG lives and breathes fire. I was limited on time but I put 4 mags down it with out a hitch. As for accuracy, its not as good as my 11.5 but its good enough to hit a chest size target at 100 yards. I suspect with a proper crown job that it will do alittle better. To all the nay sayers that said it would not work http://www.youtube.com/watch?v=GeXgwbx79IQ |
|
You sir, are a mad scientist with a hack saw.
I respect that. Well done on sticking to your guns on this project. (pun intended) BTW, I do NOT want you as my number two man in the stack. Nomex be damned, I'd be fried golden brown by the muzzle flash from that thing if you shot past me! |
|
Quoted:
Quoted:
I'll try to shoot it first, if not ill send the whole upper to ar15barrels.com and have them work out the issues with the gas sysem. If it has to be converted to a pistol gas system I'm ok with spending the $$$.. Why not just shoot it into space? You would likely get it back sooner than Randall will return it. this is true... |
|
I would have cut it right behind the brake and then have it threaded..
|
|
That's hot stuff homie. Lovin' it. |
|
Glad to see it worked, I love it when all the haters have to eat crow
|
|
Quoted:
I caught a lot of flak for this on another forum: http://i90.photobucket.com/albums/k252/chrisq_01/DSCF0396.jpg Personal taste is, well... Personal. Where on earth did you get your glock slide chrome plated/dipped whatever. Im trying to add things to the birthday list for the wife |
|
Not sure how he did his but most people just sand off the finish and buff it.
|
|
Quoted:
It's hilarious that so many people are worked up that the OP decided to have fun with a junk upper. Of course, since so many people here seem to think the primary purpose of a rifle is to look cool in pictures on the internet I should not be surprised at this reaction. +1 took the words |
|
Quoted:
Glad to see it worked, I love it when all the haters have to eat crow +1 |
|
It's funny, wheres everyone that was bitching about the dwell time....
|
|
I like your taste sir, glad to see it ran good.
Do you have any other entertaining franken projects to share? |
|
Looks like it runs.
Take it hunting, kill and cook with one shot. |
|
Nice to see that it runs good. Didn't you post that "glock chop" project on the G&G forums? You are very creative with a hacksaw, and I applaud it.
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.