Bravo Gunfighter Charging Handle

AR-15 » AR Discussions

AR Sponsor:

Site Notices

[ARCHIVED THREAD] - Bravo Gunfighter Charging Handle

Posted: 3/7/2010 11:42:28 PM EDT

I did a build last week and installed a Gunfighter Charging handle in it. I was very impressed. When pulling back on the left side of the 'T" the gun feels like it's a side charger. You don't get that feeling that the handle is twisting or torqueing like I did with the handle with the PRI big latch I have.
When the latch is pulled back it goes against the back of the handle instead of putting the load on the roll pin. I have seen pictures of a few of the standard handles with the pin ripped out from doing left side charging drills.
I ended up ordering 3 more to replace my other ones. This is a great product, I just wish they would stop coming out with this stuff as my Credit card has run screaming from the house.

Posted: 3/8/2010 12:07:03 AM EDT

[#1]

I also liked it more that the PRI one.

Posted: 3/8/2010 1:12:52 AM EDT

[#2]

I would like to do "side charging" but I am afraid I will bend the charging handle. Are gunfighter charging handles stronger?

Posted: 3/8/2010 1:51:57 AM EDT

[#3]

yes

Posted: 3/8/2010 2:28:10 AM EDT

[#4]

Just installed one and it feels so solid. Works great with the BAD lever also.

Posted: 3/8/2010 3:45:29 AM EDT

[#5]

I too plan on ordering a few, I have heard nothing but good about them!!

NCH

Posted: 3/8/2010 4:18:02 AM EDT

[#6]

BCMGunfighter Mod4: AAAAAA++++++

Posted: 3/8/2010 4:46:44 AM EDT

[#7]

I side charge mine and it feels rock solid. Very well made product.

Posted: 3/8/2010 4:59:44 AM EDT

[#8]

Same here, great product strong and solid as hell.

Posted: 3/8/2010 5:08:18 AM EDT

[#9]

Agreed. Very happy with the purchase so far. It is much smoother than what I was using before.

Posted: 3/8/2010 5:31:15 AM EDT

[#10]

Does anyone have a link to where you can get one of these?

And will these fit on any upper? Or only the BCM uppers?

Thanks

Posted: 3/8/2010 5:33:59 AM EDT

[#11]

I wondered when a thread like this would pop up.

Posted: 3/8/2010 5:42:21 AM EDT

[#12]

A+++++ love mine.

Posted: 3/8/2010 5:46:05 AM EDT

[#13]

Quoted:
Does anyone have a link to where you can get one of these?

And will these fit on any upper? Or only the BCM uppers?

Thanks

Will fit in any upper.

You can pick one up Here

Posted: 3/8/2010 5:48:53 AM EDT

[#14]

I have a LMT tac latch and find it to be a good charging handle. Has anyone run both the LMT and the BCM and how did they compare?

Posted: 3/8/2010 5:49:17 AM EDT

[#15]

Quoted:

Quoted:
Does anyone have a link to where you can get one of these?

And will these fit on any upper? Or only the BCM uppers?

Thanks

Will fit in any upper.

You can pick one up Here

Thank you kindly sir!

Posted: 3/8/2010 6:28:54 AM EDT

[#16]

Quoted:
I wondered when a thread like this would pop up.

January

- Clint

Posted: 3/8/2010 7:17:40 AM EDT

[#17]

Yeah there's been a couple of threads about them. I love mine for my 15's. Just got one this weekend delivered for my AR10 and it works great, I'm sure they're still in stock if anyone is interested.

Posted: 3/8/2010 7:25:46 AM EDT

[#18]

I have a few and they will soon replace all the others when funds allow.
Give one a try.

Posted: 3/8/2010 7:32:28 AM EDT

[#19]

This is the next upgrade for my AR's. I've heard nothing but good reports ref these BCM Gunfighter charging handles.

Posted: 3/8/2010 7:54:18 AM EDT

[#20]

Ever since I put one in mine, I have been side charging with my left hand. No problems whatsoever and it feels very sturdy.

Posted: 3/8/2010 9:17:21 AM EDT

[#21]

I have a PRI GB now, how does the Gunfighter do with suppressed weapons compared to the GB? Is a suppressed version in the works?

Posted: 3/8/2010 9:21:08 AM EDT

[#22]

Quoted:
I have a PRI GB now, how does the Gunfighter do with suppressed weapons compared to the GB? Is a suppressed version in the works?

+1

Posted: 3/8/2010 10:29:01 AM EDT

[#23]

neato..now something else i need to buy

Posted: 3/8/2010 10:29:51 AM EDT

[#24]

I need to order one. After I pay off my credit card from the last 2 things I bought

Posted: 3/8/2010 10:54:08 AM EDT

[#25]

mod3 or mod4?? which do you prefer?

Posted: 3/8/2010 11:01:01 AM EDT

[#26]

I got the mid size and installed in my midlength, like it very well.

Posted: 3/8/2010 11:50:54 AM EDT

[#27]

Do like and it's priced right, gen 4.

Posted: 3/8/2010 12:49:09 PM EDT

[#28]

Mod. 4 Thread I posted in GD

I personally don't really care for (even the medium) oversized latch for off-range use.

Posted: 3/8/2010 3:46:15 PM EDT

[#29]

I prefer the LMT for duty and SHTF rifles to awnser the persons question above. The LMT is also solid and is a little more low profile. Less likely to snag on something, but just oversized enough to be an advantage.

Posted: 3/8/2010 6:03:22 PM EDT

[#30]

I got the Mod 4 when they came out. you can't beat the BCM Gunfighter

Posted: 3/9/2010 2:47:22 AM EDT

[#31]

I got the Mod 3 (large latch). I have a Magpul ACS stock on my rifle, which is a bit wider than the standard stock, and the latch sticks out in the perfect position for me with it. I'd get a Mod 4 (Med latch) if I were running a standard width stock. I was skeptical about spending the money at first, but I wouldn't run a rifle without one now.

Posted: 3/9/2010 3:36:46 AM EDT

[#32]

Some people don't like an extended latch at all. They tend to get hung up on your gear, and or poke you in places you'd rather not get poked. I've tried lots of latches. The PRI is great too. But, I now have a Mod 3 and a Mod 4.

Personally I think the Mod 3 is just to big. I suppose if you're running a bench rest gun or a gun with a large optic on it, it would be a good choice. But if you must run an extended latch the Mod 4 is the way to go. When I run the thing in conjunction with a BAD lever, or do any other dynamic drills, it does help me get a better grip on the handle. And the gear hang ups and poking are minimal.

But this is like which grip to use. Its very subjective and personal.

Posted: 3/9/2010 5:59:13 AM EDT

[#33]

Thanks for the info I am pretty much sold on this and will be ordering one today!

Posted: 3/9/2010 8:46:19 AM EDT

[#34]

I've done many side charges with a standard charging handle, no problems. I understand the design of the BCM CH, and plan on getting one, just saying that my standard CH feels pretty solid in most cases.

Posted: 3/9/2010 11:43:37 AM EDT

[#35]

I love mine, but I bought the large and it tends to snag on thing sometimes... and i've been pinched by it a couple of times. But thats mainly cause of the user, not the product.

Posted: 3/9/2010 12:48:48 PM EDT

[#36]

mmmm I hope they make the BCM CH with a GB mod that would be sweet. cause thats what i need.

Posted: 3/9/2010 1:46:23 PM EDT

[#37]

I recommend the Mod4 version to most users. It is great for scopes that is tight to the upper and most other applications. The Mod3 sticks out a little to far for me but I'm still running it on one of my 15's. I bought both versions to try them out and prefer the Mod4.

Posted: 3/9/2010 2:46:11 PM EDT

[#38]

Having run tac latch's for years without breaking one, I tried a GF. I still torque it to the right side fo teh rifle, but no issues with it (no issues with reular CH's either). However, if you price out a tac latch and a CH, teh price is pretty close to the GF.

Posted: 3/9/2010 2:47:20 PM EDT

[#39]

Just installed the mod 4 on my rifle and it works great, makes me wonder why I didnt get one sooner.

Posted: 3/9/2010 3:26:23 PM EDT

[#40]

I just installed mine today and my upper receiver doesn't like it. It's very rough and is all ready scratched to shit. In fact, I'm pretty sure I can smell smoke when I pull it back and It's very wet. The upper is a VLTOR MUR. Just weird. I think I need to shot it and maybe it'll help. I replaced a gas buster, and it was smooth as silk so I dunno.

Posted: 3/9/2010 3:29:02 PM EDT

[#41]

Love my mod 4 charging handles. turns the AR15 into a true feeling side charger. The mod3 would've been too large and intrusive for me since I already feel a slight poke from the mod4 on the side of my ribcage right through my shirt when not wearing any gear.

Posted: 3/9/2010 4:48:24 PM EDT

[#42]

Quoted:
mmmm I hope they make the BCM CH with a GB mod that would be sweet. cause thats what i need.

Roll your own man its easy.

[ARCHIVED THREAD] - Bravo Gunfighter Charging Handle

AR-15 » AR Discussions

AR Sponsor:

Warning

Confirm Action

About AR15.COM

Stay Connected

Newsletter

Contact Us