Best 4 position stock?

AR-15 » AR Discussions

AR Sponsor:

[ARCHIVED THREAD] - Best 4 position stock?

Posted: 3/11/2006 12:05:56 PM EDT

Ok this will be short and to the point. I have see every thing from Bushmasters for $107 to Leapers for $30. Is the Leapers any good or is it worth the extra money for more expensive one?
The three choices.

Bushmaster-$107
Sog Armory-$70, this one looks the same as BM but I don't know the quality of it.
Leapers-$30, Is this crap or not?

Thanks in advance!

Posted: 3/11/2006 12:07:54 PM EDT

[#1]

sure you don't want a 6 pos?

I'm happy with my CMT set-up.

Posted: 3/11/2006 12:09:26 PM EDT

[#2]

Yes I am sure. Going for the Colt 727 look.

Posted: 3/11/2006 12:09:41 PM EDT

[#3]

are you looking for a CAR style 4 pos stock?

leapers is crap
bushy is too much
dont know on the SOG

get a CMT for ~$80 or a RRA for $42 from bravocompanyusa

Posted: 3/11/2006 12:21:47 PM EDT

[#4]

Quoted:
are you looking for a CAR style 4 pos stock?
leapers is crap
bushy is too much
dont know on the SOG
get a CMT for ~$80 or a RRA for $42 from bravocompanyusa

Yes I am looking for a"CAR style 4 pos stock" I figured leapers was crap. So the one from bravocompanyusa is made by RRA and is it good quality? Any body got a link for the CMT mentioned above?
P.S. Man you guys type FAST!

Posted: 3/11/2006 6:45:40 PM EDT

[#5]

Dose any one have any experince with the one from SOG or the 4 Position Fiberlite stock from CMMG INC?

Posted: 3/11/2006 7:47:45 PM EDT

[#6]

look up essential arms.

they have the original looking coated stocks which look great along with the rubber coated ones, both in aluminum.

Posted: 3/11/2006 7:49:01 PM EDT

[#7]

I thought the 727 just ran a "gen 3" CAR stock, not the Al version?

Posted: 3/11/2006 8:05:22 PM EDT

[#8]

Quoted:
Quoted:
are you looking for a CAR style 4 pos stock?
leapers is crap
bushy is too much
dont know on the SOG
get a CMT for ~$80 or a RRA for $42 from bravocompanyusa

Yes I am looking for a"CAR style 4 pos stock" I figured leapers was crap. So the one from bravocompanyusa is made by RRA and is it good quality? Any body got a link for the CMT mentioned above?
P.S. Man you guys type FAST!

the RRA one i got from BCusa is working great, for the price ($42 complete) is worth it--fit is pretty tight (h/w, tube is not mil-spec)

there are several dealers in the industry board who have the 4pos CMT (dsagarms, c4igrant)--milspec tubing too....and from what i expect, just a little more play, but still top quality

Posted: 3/11/2006 8:08:49 PM EDT

[#9]

Leapers is the best! I like stuff made in China!

Posted: 3/11/2006 8:16:48 PM EDT

[#10]

Another vote for the CMT CAR style stock.

Posted: 3/11/2006 8:24:29 PM EDT

[#11]

Cavalry Arms

Posted: 3/11/2006 8:30:03 PM EDT

[#12]

From what I can see I think the stock offered by SOG and CMMG are the same as the CMT. Leapers and RRA are out. So now it is between CMT and BM, and I am leaning toward CMT. Any reason BM is better? And as for Essential Arms Co I am planning on using there 2 position all aluminum stock for a XM177E1 build. Thanks guys!

Posted: 3/11/2006 8:34:34 PM EDT

[#13]

There is no way that Bushie could be figured to be a better stock, the CMT is a better unit. IIRC, the below is wearing a CMT stock in the pic.

Posted: 3/11/2006 8:42:40 PM EDT

[#14]

Stickman, that's one hell of a picture! VERY nice!!!
Ok boys, my mind is made up. CMT it is! Thanks for all the in put!

Posted: 3/12/2006 5:33:58 AM EDT

[#15]

FWIW, the # of positions is a function of the buffer tube, and not the stock

I have always used the 4 position options, but admit there are times I wish there were more.

Looks like a quality drill press could modify the 4, but never tried it or seen it done

Posted: 3/12/2006 6:36:36 AM EDT

[#16]

Quoted:
Looks like a quality drill press could modify the 4, but never tried it or seen it done

I've done it with a regular hand drill. The big thing to remember is tape or mark your drill bit so that you aren't drilling to far into your buffer tube and going through. A standard drill bit hole will need a little cleaning up to flatten out the bottom of the holes.

[ARCHIVED THREAD] - Best 4 position stock?

AR-15 » AR Discussions

AR Sponsor:

Win a FREE Membership!

Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!

You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.

Warning

Confirm Action

About AR15.COM

Stay Connected

Newsletter

Contact Us