Lets see your MK12's!

AR-15 » AR Discussions

AR Sponsor:

Site Notices

TNVC Partners With Envision Technology - MARS Rangefinder & RAIL Family, MARS-Lc In-Stock!

[ARCHIVED THREAD] - Lets see your MK12's!

Posted: 1/30/2006 6:15:52 PM EDT

I'm building an Mk12 and would like to see some of those eho have an Mk12 MOD 0/1. I haven't fully decided if I want the MOD 0 or MOD 1. So if you would, give me your opinion on what you think is best and what you think is cheaper to make (I like both the MOD 0 and 1) All I have at the moment is the upper and the bbl. I would greatly appriciate your pictures and input.

Thanks!

Posted: 1/30/2006 6:41:08 PM EDT

[#1]

Posted: 1/30/2006 6:42:53 PM EDT

[#2]

Rookie....

Posted: 1/30/2006 6:46:46 PM EDT

[#3]

Posted: 1/30/2006 6:56:40 PM EDT

[#4]

Quoted:
www.besthdw.com/test/mod1stoship.jpg

WOW

Posted: 1/30/2006 6:59:58 PM EDT

[#5]

nice rack!

sorry, couldn't resist that.

Posted: 1/30/2006 7:01:00 PM EDT

[#6]

Quoted:
www.besthdw.com/test/mod1stoship.jpg

You just love pulling that shit out, don't you.

Posted: 1/30/2006 7:02:28 PM EDT

[#7]

Quoted:
Quoted:
www.besthdw.com/test/mod1stoship.jpg

You just love pulling that shit out, don't you.

Sure do

None of those were mine, those are real. I did goet to help test fire some though

Posted: 1/30/2006 8:10:55 PM EDT

[#8]

Mod 1 is the way to go.

Posted: 1/30/2006 8:28:43 PM EDT

[#9]

Quoted:
Mod 1 is the way to go.

img82.imageshack.us/img82/5624/nearcompletespr1zc.jpg

Hey mongo, what height are your rings?? I'm assuming those are the Arms ones. But I'm trying to figure out what height I would need. I want them high. A little higher than what you'd be looking at for the irons. Yours look like they'd be what I'm looking for.

Posted: 1/30/2006 8:30:12 PM EDT

[#10]

ARMS #22 high.

Posted: 1/30/2006 10:29:04 PM EDT

[#11]

Posted: 1/31/2006 4:17:57 AM EDT

[#12]

Here is my ADCO built mod 1. Now if I could only get the OPS can..

Posted: 1/31/2006 4:53:29 AM EDT

[#13]

I am leaning a bit toward the MOD 1 side. How much did it generally cost you to build/buy it?

Posted: 1/31/2006 5:23:34 AM EDT

[#14]

Perty stick mongo.........
I like the A1 Voltor over the 6 pos stock

Posted: 1/31/2006 5:35:19 AM EDT

[#15]

Quoted:
www.besthdw.com/test/mod1stoship.jpg

Posted: 1/31/2006 8:49:18 AM EDT

[#16]

I think the whole rifle was in the 2500 neighborhood. Prices have gone up on some things like the KAC RAS and the Leupold scope since I got mine. I don't have a geat deal of paitence to build so I bought mine and couldn't be happier.

Posted: 1/31/2006 9:07:43 AM EDT

[#17]

Quoted:
www.besthdw.com/test/mod1stoship.jpg

OK..who's been taking secret pics of my walk in safe?

Not a true Mk12, but in the spirit of it-

Posted: 1/31/2006 1:48:47 PM EDT

[#18]

Quoted:
Perty stick mongo.........
I like the A1 Voltor over the 6 pos stock

I found out that between bench and prone, there was no stock movement with the adjustable stock, so I went with the fixed one. Of course, I don't have to wear body armor, so a shorter pull won't be an issue with me.

Posted: 1/31/2006 4:38:11 PM EDT

[#19]

Quoted:
ARMS #22 high.

Is it higher than what you would look through the irons?? Or the same? Or lower? It seems like it's a hair higher and that would be just the ticket. I guy at a gunstore told me I HAD to have the extra high. Maybe he thinks you HAVE to clear the FSB. I don't know. I just never got to look through any of the heights, but I know what I'd like. Thanks for the info.

Posted: 1/31/2006 4:44:55 PM EDT

[#20]

Quoted:
Quoted:
ARMS #22 high.

Is it higher than what you would look through the irons?? Or the same? Or lower? It seems like it's a hair higher and that would be just the ticket. I guy at a gunstore told me I HAD to have the extra high. Maybe he thinks you HAVE to clear the FSB. I don't know. I just never got to look through any of the heights, but I know what I'd like. Thanks for the info.

You don't really need to clear the FSB. With high rings, I have a tight, normal cheek weld on the stock, very similiar to, if not the same as, using irons.

Posted: 1/31/2006 4:54:08 PM EDT

[#21]

Quoted:
Quoted:
Quoted:
ARMS #22 high.

Is it higher than what you would look through the irons?? Or the same? Or lower? It seems like it's a hair higher and that would be just the ticket. I guy at a gunstore told me I HAD to have the extra high. Maybe he thinks you HAVE to clear the FSB. I don't know. I just never got to look through any of the heights, but I know what I'd like. Thanks for the info.

You don't really need to clear the FSB. With high rings, I have a tight, normal cheek weld on the stock, very similiar to, if not the same as, using irons.

Thanks man. Now I'm glad I didn't buy the "low" set that Steve had in stock!!!!

Posted: 1/31/2006 5:08:02 PM EDT

[#22]

I have 22H's as well...I have no trouble with cheekweld on mine...

Posted: 2/9/2006 7:14:06 PM EDT

[#23]

Just ordered a low profile gas block, rifle length gas tube, KAC rife FF RAS (found at PDC for $360) and some tools. Now I am just waiting for the parts to come in to get the basics of the upper built. I'll get some 10W-30/40 oil when my parts come in for the barrel nut threads.

Whats left:
ARMS #22H rings
Super Sniper scope
BUIS's
KAC bipod adapter/ KAC RAS stud
Bipod
B/BC/CH w/ badger tac latch
Ops Inc brake

I have found a source for the Ops Inc brake, hopefully he'll have some sets in soon. Or maybe find a set for me at the SHOT SHOW, if you're able to buy products there.

[ARCHIVED THREAD] - Lets see your MK12's!

AR-15 » AR Discussions

AR Sponsor:

Win a FREE Membership!

Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!

You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.

Warning

Confirm Action

About AR15.COM

Stay Connected

Newsletter

Contact Us