Quoted: Stickman has been very generous in introducing me to the world of Teflon refinishing. However, I started foolishly on a different route because of the Brownells discount on Gunkote.
|
The prodical son has returned....
There are a few thoughts I would give you before you give up on what you currently have.
1. Make sure you shake it VERY well.
2. Preheat it, the more you preheat, the flatter the finish.
3. Spray LIGHT coats, and mist them on. You shouldn't be getting full coverage on one coat. Spray from a little further back. Spray a light coat, warm it back up, spray another light coat, warm it back up, repeat as needed.
Take your current glossy item, and make sure you aren't using gloss. Next, heat the item in the oven up to 300, then spray LIGHT coats fogging it onto the surface. you should be able to fog on one coat, then drop it back in the oven.
This is going to be important to keep the temperature high, which is what will give you the ultra flat/ matte finish that all the cool people have.
To answer your initial question,
"How glossy is the Grey\Black and Socom black finish?", they are both matte when applied properly. You can only get a gloss or sheen to the finish when you apply it too heavy.
"I'm wondering if perhaps it was just the spray can and the distance at which i sprayed the rifle?"- My guess would be that was the problem. Spray whats left in out of the spray can into the bottle right before you spray the above manner using your airbrush. A spray can doesn't do a good job when compared to an airbrush.
Let me know if you have any questions, I think we can get you up and running with what you currently have.