Banless pic thread?

AR-15 » AR Discussions

AR Sponsor:

[ARCHIVED THREAD] - Banless pic thread? (Page 1 of 4)

Posted: 9/8/2004 9:24:43 AM EDT

First up:
J&T lightweight tactical kit with an A2 stock on an RRA lower. Complete with flashhider and bayo lug. extras, ergo grip, and YHM 2 piece H'guards. I'm waiting on the mailman for

: Eotech 551, ~~ARMS #40A~~, TDi short V grip, TDi 1" light mount, and Surefire G2. should be here next week. got my #40 today from pete in NH (thanks), still waiting for the rest.

Next, Not an AR but just as cool IMO:

Complete Imbel Para FAL kit built on a DC upper. Barrel cut and threaded to 17", Original flashider and as you can see, the stock FOLDS quite well. US parts: upper FSE h/t/s, FSE charging handle, pistol grip, gas piston. She'll get gunkoted soon.

Had to redo my sub to my free pic server. I hope hunt101's uploader is back online soon.

Posted: 9/8/2004 9:31:33 AM EDT

[#1]

Lemme put in a reservation for my 16" CAR (type) RRA lower/ Model 1 kit. Complete with 4 position stock, A2 flash sup., and FSB WITH bayonet lug....I know the lug won't do me any good on the 16" carbine...but hey... I got it just because I could

Here she is...she shure looks nice on the old oak table I restored recently....

Posted: 9/8/2004 10:11:04 AM EDT

[#2]

---Bushmaster M4gery with YHM free floated handguard, Aimpoint ML2, #22M68 mount with cantilever spacer, Phantom "Bushmaster" flash hider (YHM-29), MAD BUIS, side-mount front sling mount, USMC M4 sling and Hogue pistol grip and some generic but tough foregrip. The YHM handguard and the Phantom were put on by Chris at Eagle Firearms. He is ONE AWESOME DUDE, btw... very affable, helpful, informative, and fair. He'll be getting my business in the future FOR SURE.

---J&T AR-15A3 clone

Posted: 9/8/2004 10:20:31 AM EDT

[#3]

This spot is for a new Colt LE6920

Posted: 9/8/2004 10:26:33 AM EDT

[#4]

Future home of a Bushmaster/RRA 9mm.

Before:

Off with the old brake:

After:
YHM specter length FF, RRA 4 position stock, and RRA 9mm FH. Still waiting on front and rear BUIS and an optic.

Posted: 9/8/2004 10:37:51 AM EDT

[#5]

future home of a LMT 14.5 upper with a DD7.0 forearm (Thanks Wes at MSTN)
Lower : Lauer/LMT (tanks Denny at Dennys guns)
Stock: Vltor carbine (thanks again to Wes at MSTN)

Posted: 9/8/2004 10:44:24 AM EDT

[#6]

W00t W00t
Eagle Arms/Model 1 Chrome Lined 16" M4 Flatop with Surfire M73, Tango down vertical grip, YHM flip up rear sight and Tac Point sight with KAC copy mount, and Ti bolt carrier, A2 FS and 6 position colapsable stock.

Olympic Arms 45 ACP carbine with colapsable stock
Stag Arms/Model 1 Ultralight A2 with colapsable stock
Folding stock WASR-10 hi cap

Posted: 9/8/2004 10:48:14 AM EDT

[#7]

Reserved.

Posted: 9/8/2004 11:01:53 AM EDT

[#8]

Connecticut sucks...

Posted: 9/8/2004 11:02:11 AM EDT

[#9]

Here is my 16" A3. She's equiped with the following:
-Daniel Defense 9.5 FSP rail
-1:9 RRA M4-profile barrel; chrome-lined
-RRA NM 2-stage trigger
-A2 FS (soon to be an AAC M4-2000 quick-detach FS for my M4-2000 can)
-Tango Down VG
-Hogue grip
-RRA 6-pos. stock
-PRI Gas Buster charging handle
-LaRue BUIS
-Aimpoint ML2 in an ARMS 22M68 mount w/canteliever spacer
-SureFire G2 (beafed up) in a FAS2 mount
-DD bunsed loop and CQB Solutions MOUT sling

[RESERVED FOR PICTURE]

Here is my 20" A3. Equiped with the following:
-1:7 Bushmaster Government Profile barrel
-LaRue 20" rail
-RRA NM 2-stage trigger
-Phantom FS
-First Samco G27 grip
-A1 stock
-ARMS 40L
-TA-01 ACOG and ARMS 19S mount
-CQB Solutions 3-point sling

[RESERVED FOR PICTURE]

Here is my 16" A2. Sporting the following:
-1:9 Bushmaster M4-profile barrel
-Vortex FS
-First Samco G27 grip
-RRA 6-pos. stock

[RESERVED FOR PICTURE]

These are my first thre projects. Hopefully, they won't take me too long past midnight to complete.

Posted: 9/8/2004 11:12:28 AM EDT

[#10]

RFFY

Posted: 9/8/2004 11:17:35 AM EDT

[#11]

Sorry for the crappy quality... its the middle of the night !

Posted: 9/8/2004 11:20:13 AM EDT

[#12]

Keepin' it Simple... A3 M4orgery . Bushy Lower/DPMS upper.

Posted: 9/8/2004 11:29:21 AM EDT

[#13]

My spot---

Bushmaster 16" M4 patrolmans barrel
*Phantom FS
*RRA A3 flattop upper
*RRA 6 pos stock
*DPMS Lower with Houge Grip
*GG&G Forward vert grip
*EOTech
*MOUT Sling

All assembled by ME!

Barrel is on two week backorder.

Posted: 9/8/2004 11:42:35 AM EDT

[#14]

Future home of my ban-less

#0300 Lower
and Det1 Stock . . . . Semper Fi!

(picture to come)
SBR, VLTOR (green), DD M470, Aimpoint

Posted: 9/8/2004 11:47:46 AM EDT

[#15]

Just got my new NO ban barrel today.

Posted: 9/8/2004 11:52:14 AM EDT

[#16]

Barrel is on two week backorder.

yes they are...............

im building an m16a2 profile 20" A2 and a 6 pos/ 16" M4gery A3

Posted: 9/8/2004 11:53:16 AM EDT

[#17]

Bushmaster XM15 E2S M4A3 Type LE Carbine
-1:7 Bushmaster 14.5" M4-profile barrel; chrome-lined; Phantom 5C2
-Tango Down Verticle grip
-Tango Down Battle grip
-LaRue Tactical 7.0 w/Tango Down Covers
-LaRue Tactical BUIS
-LaRue Tactical QD EOTech Mount
-EOTECH 551.A65 REV.F
-PRI Military Latch
-Redi-Mag

Fresh out of the box, upper leaves for gunsmith tommorrow to mount Larue 7.0 and 1 in 7 barrel with 5C2. all other toys go on when it returns

Colt LE6920
In Shipment
[RESERVED FOR PICTURE]

Posted: 9/8/2004 12:14:15 PM EDT

[#18]

Here's mine!

"Junk Gun" M4-type with VLTOR 5-position stock

"Plain Jane" M4-type with RRA 6-position stock

Bushmaster/RRA 9mm SBR - the Sunset in only halfway for this one... still waiting on my approved Form 1 (pending since April 14)...

and a couple NON-ARs, just for kicks:

Intrac AK-74 with Romanian folder

Glock 26 with factory "+3" magazine extensions

Posted: 9/8/2004 12:22:36 PM EDT

[#19]

Before paint job...

After paint job...

In the woods...

Posted: 9/8/2004 12:26:31 PM EDT

[#20]

Bushmaster M-4 with all the goodies.

http://img.photobucket.com/albums/v381/ST5_Terminator/P1000490.jpg

Posted: 9/8/2004 12:36:25 PM EDT

[#21]

Semiautomatic Assault Weapon Update

By statute, the prohibitions relating to semiautomatic assault weapons and large capacity ammunition feeding devices expired on September 13, 2004. As a result, certain sections of the Gun Control Act, 18 U.S.C. Chapter 44, and its implementing regulations, 27 CFR Part 478, are no longer in effect.

HELL YEA

My M4gery:
RRA lower
RRA LPK
Vltor stock hardware
Crane Clone stock
CMMG 16 inch M4 upper 1 in 7 chrome lined

More pics coming soon

Posted: 9/8/2004 12:39:10 PM EDT

[#22]

Saved for M4gery, and M16A4 clone.....

Posted: 9/8/2004 12:46:59 PM EDT

[#23]

Quoted:
MINE!!!!

Future Home of an M4gery. . .

+1

Posted: 9/8/2004 12:51:10 PM EDT

[#24]

Reserved for many, many pics.

Posted: 9/8/2004 12:51:16 PM EDT

[#25]

Tagged

Posted: 9/8/2004 1:04:54 PM EDT

[#26]

[1]Armalite lower
RRA green furniture from Adco
Bushmaster 11.5" w/5.5" FH

[future pic]

[2]100% Bushmaster M4gery w/ CQB solutions single point sling

[future pic]

[3]Stag lower
Bushmaster 14.5" m4 profile barrel
Yankee Hill rifle length quad rail
Yankee Hill flip up front sight
Chopped carry handle
Aimpoint CompC, mounted to a $40 YHM rail riser with the stock ring. (yea I know, shoulda got the $400 aimpoint and the $200 LaRue)
RRA M4 stock
Smith Vortex

[future pic]

Posted: 9/8/2004 1:08:07 PM EDT

[#27]

TBD on 9/13.....

Posted: 9/8/2004 1:12:21 PM EDT

[#28]

Quoted:
Barrel is on two week backorder.

Oh, how I wish I had shares in the various AR manufacturers...

Posted: 9/8/2004 1:13:58 PM EDT

[#29]

Iv'e got a few in the making.

Danny

Posted: 9/8/2004 1:54:47 PM EDT

[#30]

Bushmaster 16" Patrolman's Carbine barrel.
RRA No label stock
Stinger Lower
USAF flipup sight (Matech)
A2 FS
Bayo Lug even though I don't really care to lead or even participate in one
Just because.

Posted: 9/8/2004 1:58:54 PM EDT

[#31]

I'm sure I'll find something to post here....

Posted: 9/8/2004 2:15:39 PM EDT

[#32]

and SPOT RESERVED FOR "MORE THRUST PER SQUEEZE"

RRA Lower
RRA LPK
RRA M4 Handguards
LMT M4 Upper
LMT BUIS
LMT Enhanced M4 Stock
LMT Standard carriar & bolt,

and one highly desirable patina from lack of masking tape during bolt catch install

Posted: 9/8/2004 2:28:12 PM EDT

[#33]

Reserved for various AK's, AR's and even a Century CETME

Posted: 9/8/2004 2:50:59 PM EDT

[#34]

Well here it is:

LMT 16" with Larue 7.0, VLTOR collapseable stock, and various Tango Down grips/pannels.

Posted: 9/8/2004 3:08:35 PM EDT

[#35]

rickinvegas, exactly what is that?

Jus' wonderin'

Posted: 9/8/2004 3:10:08 PM EDT

[#36]

Here goes :

CMMG M4 16"upper
RASII

Bushy lower

WOOOOO HOOOOOO!

Tex78

Posted: 9/8/2004 3:20:27 PM EDT

[#37]

.

Posted: 9/8/2004 3:33:32 PM EDT

[#38]

This is my spot.

That looks like a photoshopped up Highpoint!

Posted: 9/8/2004 3:41:50 PM EDT

[#39]

Model "1" Sales CAR Kit in .300 Fireball w/A2 Flash Hider, A3 Flattop, standard CAR tele stock on a Century Arms lower, YHM Folding Front sight/gas block,A.R.M.S #40A rear sight,Trijicon Reflex II w/12.9MOA Triangle, Tactical Advantage X-180 Single point Sling Mount w/680 QRB sling, M4 Handguards w/rail mount and vert. foregrip, A2 pistol grip modified to A1 specs. Here are some completed pics. Enjoy.

This last one is a pic of a 5.56x45mm, .300 Fireball and a 7.62x39mm for comparison.

Posted: 9/8/2004 3:53:40 PM EDT

[#40]

reserved for a Shorty Wilson UT-15 and a Benelli M1Super 90 w/pistol grip ,mag extension and big pointy nast teeth.

Posted: 9/8/2004 4:04:15 PM EDT

[#41]

Here is the beginning... the barrel is now on its way to get the phantom installed

Posted: 9/8/2004 4:06:36 PM EDT

[#42]

... BATFE baby!

Posted: 9/8/2004 4:09:47 PM EDT

[#43]

This is where my photo will go, there are many like it but this one is mine.

Jerad

Posted: 9/8/2004 4:10:38 PM EDT

[#44]

Gotta get in line!

(Reserved for Colt 6721 w/ M4 handguard and M4 CQD Sling Adaptor, to be posted mid next week)

Posted: 9/8/2004 4:14:03 PM EDT

[#45]

reserved for my STAG-MASTER 11"pistol; and others to come soon after i free up some funds

Posted: 9/8/2004 4:16:29 PM EDT

[#46]

This needs to be tacked...

Posted: 9/8/2004 5:06:07 PM EDT

[#47]

WE WON

here is my post-ban bushmaster m4/w kkf brake

but here it is again after lots more mods

its got:
flat top bushy upper
arms 40
eotech
new fsb/ w bayo lug
vortex g6
pri fatboy gas tube
tack-latch
kac ras II
surefire g2
houge grip
cqb soultions sop sling
bushy 6pos telestock
gg&g vert grip

I CANT BELIVE ITS FINILY OVER-SWINESTINE CAN EAT MY ASS