User Panel
Posted: 6/22/2004 5:01:19 AM EDT
We've got 16" Lightweight chrome lined barrels in stock and standard 16" HBAR chrome lined as well. Pre ban's only at this time. Price on either is $189.95 for barrel alone, $339.95 for barreled upper, and $499.95 for a kit.
Jesse |
|
Is the lightweight a pencil thin configuration, M4 or fluted?
Thanks. |
|
The lightweight is the pencil thin barrel, similar to the A-1 contour, but with more beef back in front of the chamber area.
Jesse |
|
Jesse,
Does the barrel come with front site mounted? Thanks, -John |
|
Those barrels come with the front sight tower installed. The lightweight barrels are done correctly using a small diameter sight tower rather than beefing up to .75 diameter so that an HBAR tower can be used like some others do.
Jesse |
|
OK - last dumb question. I have the handguards from your 16 inch HBAR kit. Will I need new handguards or anything else?
|
|
The twist rates are still 1 in 9. The website hasn't been updated yet, it is getting ready for a complete overhaul shortly.
Jesse |
|
Jesse, does the light weight barrel come with gas tube, gas tube pin, delta ring, and front sight post? Any pics of the barrels, to help understand whats included? What's shipping? Order direct on JTD site?
Thanks, flashlegs |
|
Will you guys offer this bbl with 5.5 hider...kinda like a XM-177 bbl? If not, if I got the bbl cut, is there enough bbl diameter for me to have it re-threaded....I guess from BM website, you can't do this with their LT Weight bbl. Oh, one other things can we get the 14.5's with perm attached goodies? Thanks!! Regardless I'll be scooping up some kits from you real soon--this is good stuff the lack of chrome lining was holding be back--untill now.
|
|
We offer the commando barrels, in both HBAR & LW, the cost is $179.95 for non-chrome, and $239.95 for chrome lined for the barrel only, barreled uppers would be $329.95 and $379.95 respectively and kits would be $489.95 and $539.95. We also offer 14.5" barrels with phantom flash hider permanently attached, they run $5 more than the commando's.
Jesse |
|
Man you guys are the shit.....any pics....would like to see a Lt weight with 5.5 hider....is the 14.5's M4 Profile...HBAR or Lt Wt? You guys are gonna kill my wallet.....so many toys How bout a lt wt...14.5 with a phantom?
|
|
It will take me a bit to get those pics, I'm leaving tomorrow for DC for the Chantilly VA show, and won't be back until Monday. We can do the 14.5" LW barrels with a perm. attached phantom, no problem.
Jesse |
|
Oh, babe....you got me drooling now....hehehe. Is this something you have in stock....I'll be wanting it in a "kit" form. Do you have A1 uppers? How bout small hole with no brass case deflector and no fwd assist? What would be the cost with CAR handguards, and six posit stock, duck bill grip and standard internals? Thanks! You have been super helpful.
|
|
We have those in stock and ready to ship. We do offer A-1 uppers, but they are the newer variety with brass deflector and forward assist. The cost on that kit with duckbill and DS-4 stock upgrade would run $475 for standard, and $525 for chrome lined.
Jesse |
|
Jess, what is the price on the Preban Lightweight Commando (11.5) barrel (threaded) and complete A1 receiver (teardrop FA) barreled with handguards, gas tube and WITHOUT the 5.5inch FLASH HIDER??
Also Jess, what's the outer diameter of the threads on the Preban version of the Lightweight barrel? I have a flash hider with an Inner diameter of 0.505, with the barrel mate with the FH? |
|
A LW 11.5" barreled upper would run $299.95 (+$50 for chrome lined, +$100 with bolt carrier assy. & charging handle). The barrels are threaded 1/2x28, so if it has the correct thread pitch it should work.
Jesse |
|
Jesse, is the gas port opened up on the 11.5 inch commando barrel? What is the price on a LIGHTWEIGHT BBL 16 INCH, A1 Upper, Chrome Lined BBL, Teardrop FA KIT? To confirm..... 16 inch LW Chrome lined kit A2 Upper is $499? $16 shipping? 11.5 inch LW Kit is $489 Non Chrome Lined? |
|
|
A commando barrel (our version) is an 11.5" barrel with a 5.5" flash hider permanently attached. Pricings are as follows:
Barrels 11.5" barrel, chrome moly (HBAR or LW): $149.95 11.5" barrel, chrome lined (HBAR or LW): $199.95 16" Commando barrel chrome moly (HBAR or LW): $189.95 16" Commando barrel chrome lined (HBAR or LW): $239.95 16" barrel, chrome moly (HBAR or LW): $139.95 16" barrel, chrome lined (HBAR or LW): $189.95 Barrelled Uppers 11.5" upper (flattop, A-1, or A-2), chrome moly (HBAR or LW): $299.95 11.5" upper (flattop, A-1, or A-2), chrome lined (HBAR or LW): $349.95 16" Commando upper (flattop, A-1, or A-2), chrome moly (HBAR or LW): $329.95 16" Commando upper (flattop, A-1, or A-2), chrome lined (HBAR or LW): $379.95 16" upper (flattop, A-1, or A-2), chrome moly (HBAR or LW): $289.95 16" upper (flattop, A-1, or A-2), chrome lined (HBAR or LW): $339.95 Kits 11.5" kit (flattop, A-1, or A-2), chrome moly (HBAR or LW): $459.95 11.5" kit (flattop, A-1, or A-2), chrome lined (HBAR or LW): $509.95 16" Commando kit (flattop, A-1, or A-2), chrome moly (HBAR or LW): $489.95 16" Commando kit (flattop, A-1, or A-2), chrome lined (HBAR or LW): $539.95 16" kit (flattop, A-1, or A-2), chrome moly (HBAR or LW): $449.95 16" kit (flattop, A-1, or A-2), chrome lined (HBAR or LW): $499.95 We make sure that the gas ports are the smallest that should work with that size barrel. Jesse |
|
Jesse,
My brother ordered a lightweight pre-ban for me - he's got a pre-ban, and I don't. So, he's holding on to it for me until the sunset. Anyhow, I need to remove the front site tower to install an Oly FIRSH and was thinking of replacing the tower with a flip up front site. Could you recommend a flip up that would fit the reduced outside diameter of a LW barrel? Thanks, -John |
|
PRI makes a flip up front BUIS for LW diameter bbls. |
|
|
Jesse.....one more question: I have buddy who wants me to make him a 20" HBAR( or possibly Gov profile) rifle--preban config. Do you offer these with the chrome lined bbls? Thanks!!
John |
|
We have the 20" chrome lined HBAR's in stock at this time, they run $189.95.
Jesse. Sorry to take so long to get back to you, I've been in Reno and my network card went out on me. |
|
Jesse,
Do you sell the small diameter front sight tower by themselves? What diameter barrel do they fit? |
|
We do offer those, new, undrilled, forged sight towers for $24.95, they are for the lightweight barrels, .625" diameter.
Jesse |
|
You guys didn't respond to my e-mail, so I'll post it here.
Can I get a price quote(shipped) for a 16" lightweight car kit with an M4 stock, chrome-lined? Can you also explain the difference between a CAR stock and an M4 stock? Thanks. |
|
A LW kit with chrome lined upgrade and DS-4 stock would run $519.95 plus roughly $18 for shipping. The standard CAR stock is the traditional no-frills 4 position CAR stock, the DS-4 stock is the newer reinforced version that is 6-position, has the same angle on the buttplate as the A-2 stock for better gripping, as well as a swivel on the bottom that can be positioned to the bottom, left, or right.
Jesse |
|
|
We've got a full printed page list of upgrades in the new catalog, the web site is being redone currently, but is still a way off from being ready to launch. I don't have the file to snag the upgrade page from, what upgrades are you wanting, most likely we offer them.
Jesse |
|
Just parts upgrades ex: stock, handguard, pg, etc............
I'll call you next week and discuss what's best. Thanks |
|
Thanks Jesse,
Also, are your Dissipator barrels chrome lined as well? 1:9" twist? Thanks Rich |
|
Cool Greg, I'll look forward to talking to you.
We haven't ran any chrome lined dissipator barrels yet, but they are a 1x9 twist. Jesse |
|
I found the list of upgrades, so here they are:
Buttstock Options • A-2 Buttstock • Post- ban/Pre-ban CAR • Tactical • Tactical w/ adj buttplate (+$65) • A2 w/ adj. buttplate (+$65) • DS-4 Buttstock (+$25) post • VLTOR Rifle Modstock Std. (+$100) • VLTOR Rifle Modstock Clubfoot (+$100) • Ace Std Skeleton Stock (+$60) • Ace Shorty Skeleton Stock (+$60) • Ace Ultra Lite Stock (+$50) • Sulley Stock (+$60) • YHM Skeletonized Stock (+$35) Bipod • Stud only (+$12) • LM or BRM (+$70) • LMS or BRMS (+$90) • Advanced Tech Featherweight Bipod (+$40) Upper Options • A-1 • A-2 • Flattop • Flat-top w/ Carry-handle (+$65) • Tactical Hi-rise (+25) Sight Options • Picatinny Rail Gas Block • Forged front sight base (non bull barrel) • JP Gas Block Aluminum (+$60)* • JP Gas Block Steel (+$70) • GG&G Flip Up Front Sight Gas Block (+$180)* • KAC Low Profile Gas Block (+$85)* • YHM Flip Up Front Sight Gas Block (+$80)* • YHM Quad Rail Gas Block (+$45) • YHM Two Rail Gas Block (+$40) • PRI Flip Up Front Sight Gas Block (+$175)* • PRI Low Profile Gas Block, Steel (+$45) • PRI Low Profile Gas Block, Stainless Steel (+$50)* • Badger Ordnance Speed Block (+$40)* • NM Front Sight Post (+$10) • Wedge Front Sight Post (+15) • XS Precision Tactical Set Night Sights (+$130 F&R, +$85 F only) • A-2 w/NM sights (+$25) • A-2 w/Tippie NM sights (+$125) Handguard • Standard A-2 or CAR • Free-float NM (+$30) • Colt® M-4 (+POR) • Single heat shield DS-4 (+$15) • DCM FreeFloat (+$90)* • Carbon Fiber (+$90)* • Badger Handguard, CAR (+$110)* • Badger Handguard, Rifle (+$110)* • Badger Tactical Handguard, Rifle (+$150)* • M-4 RAS (+$305) • M-4 RAS w/ UK SAS Lower Rail (+$410) • M-4 RIS (+$305) • M-4 RAS II (+$335) • M-5 RAS (+$360) • M-4 Freefloat RAS (+$290)* • M-5 Freefloat RAS (+$350)* • MRE RAS (+390)* • DD M4 7.0 HG (+290)* • DD M4 9.0 HG (+$305)* • DD M4 9.5 HG (+$305) • DD M4 9.5FSP HG (+$335)* • DD M4 12.0FSP HG (+$350)* • DD M4 12.0 HG (+$320)* • GG&G Modular Tactical FF Forearm (+$320) • YHM 2 Pc. CAR HG Rail System (+$120) • YHM LW 4 Rail CAR HG (+$110)* • YHM LW 4 Rail Mid Length HG (+$120)* • YHM LW 4 Rail Rifle Length HG (+$180)* • YHM Solid 4 Rail CAR HG (+$110)* • YHM Solid 4 Rail Mid Length HG (+$120)* • YHM Solid 4 Rail Rifle Length HG (+$180)* • Troy Industries Quad Rail System (+$265) • Fobus M-33 (+$65) • Fobus M-44 CAR (+$95) • Fobus M-44 Rifle (+$95) • Colt® A-1 Triangle (+15) • Ergo M203 CAR (+$25) • Rifle M203 Handguard w/leaf sight (+$75) • ARMS SIR C (+$390) • ARMS SIR M (+$390)* • ARMS SIR Slim C (+$390) • ARMS SIR Bi-Level C (+$360) • ARMS SIR M Rifle Length (+$410) • ARMS SIR Mid Length (+$410) • PRI Gen 3 CAR Rail HG System (+$310) • PRI Gen 3 Rifle Rail HG System (+$310) • PRI Gen 3 Mid Length Rail HG System (+$310) • Surefire CAR Rail HG (+$185) • JP Modular HG System (+$140) Bolt Carrier Options/Upgrades • Standard • Chrome (+$70) • No Carrier Assembly (-$75) • Titanium Firing Pin (+$27) • LMT Improved Bolt (+150) • LMT Improved Bolt Carrier Assy (TBD) • JP Tactical Carrier Assembly(+$130) • No Carrier Assembly (-$75) Charging Handle Options • Standard • Badger Tac Latch (+$20) • Badger Low Profile Tac Latch (+$20) • Badger Ambi Handle (Coming soon) • PRI Gas Buster Handle w/ Military Latch (+$80) • PRI Gas Buster Handle w/ Flat Latch (+$77) • PRI Big Latch Military (+$20) • PRI Big Latch Flat (+$17) • 2 Finger Tac Latch (+16) Trigger Group Options/Upgrades • KAC 2 Stage (+$285) • Jewell 2 Stage (+$185) • Chip McCormick 2 Stage (+$175) • Chip McCormick Single Stage (+$170) • JP Trigger Kit (+$120) • JP Trigger Kit w/ Speed Hammer (+$165) • Large hole fire control parts (+$45) • Colt® large hole accurized trigger group (+$65) • No lower kit (-$30) Pistol Grip Options • Standard A-2 • A-2 w/ Clip-a-grip (+25) • DuckBill (+$16) • Ergo Grip (+$18) • Ergo Tactical Grip (+$50) • Ergo Target Sure Grip (+$65) • Ergo Target Grip (+$60) • Ergo Stow A Grip (+$15) • Ergo RH Sure Grip (+$20) • Ergo FoxBat Grip (+$30) • Ergo FoxBat Sure Grip (+$35) • BattleGrip (+$30) • G-27 Grip (+$25) Post-Ban Barrel Options • Ported (+$40) • Permanently attached muzzle-brake (+$40) • no barrel (-$80) Color Furniture Options • OD Green (A-2) (+$20) • OD Green (CAR) (+$20) • OD Green w/ Ergo Grip & EM-4 HG (+$45) • Coyote Brown w/ Ergo Grip& EM-4 HG (+$50) Bull Barrel Upgrades • Ported (+$40) • Fluted (+$50)** • Ported/Fluted (+$90)** • Coated Barrel (+$50) Bull Handguard Upgrades • Badger HG (+100) • Carbon Fiber (+80) • YHM Solid or LW 4 Rail Rifle HG (+$170) • YHM Solid or LW 4 Rail CAR HG (+$100) • DD M4 12.0 HG (+$310) • DD M4 7.0 HG (+$280) • PRI Gen 3 CAR Rail HG System (+$300) • PRI Gen 3 Rifle Rail HG System (+$300) • M-5 FF RAS (+$340) • M-4 FF RAS (+$280) • JP Modular HG System (+$130) Bull Front Sight Options • Bull Barrel Front Sight Tower(+$35) • JP Gas Block (+$70) • JP Gas Block, SS (+$80) • Badger Ordnance Speed Block (+$40) Threaded Flash Hiders • Phantom (+20) • AK Brake (+$20) • A-1 or A-2 • Reverse Flash-hider (+$20) • 5 1/2” Flash-hider (+$20) Buttstocks Options/Upgrades • Collapsible Pre-ban CAR • DS-4 Buttstock (+$20) • VLTOR CAR Modstock Std. (+$110) • VLTOR CAR Modstock, Clubfoot (+$110) • Ace SOCOM Stock (+$125) • Aluminum CAR stock (+$40) • Coated Aluminum CAR stock (+$65) • Magpul M93 Stock (+$225) • LMT SOPMOD Buttstock Assy (+$200) See I told ya there was a lot of them. Jesse |
|
Oh, I forgot to mention that more options are coming soon, as if those aren't enough...
Jesse |
|
Well, It's a start h.gif
|
|
Here's a new request: is there any chance of getting one of these 16" pencil barrels modified to a Dissipator format ? I presume all that would be required is to mill off the unwanted FSB material and then mount a second FSB near the muzzle.
Make my day and say you can do this . |
|
Problem is barrel diameter in front of the FSB, it's too small to mount another tower unless you find some way to shim it. You could go a slightly different route and mill the FSB, mount a set of rifle length free floating quad rail handguards (like YHM, KAC, or DD), then use a rail mounted flip up front sight. This configuration may or may not work for what you're needing, but its a thought.
Jesse |
|
Thanks for the quick reply. I was hoping the pencil barrel was the same diameter all the way along, so that the small ID FSB you already use could be installed. I guess I'll have to have the excess meat turned off my HB Dissipator barrel. |
|
|
I just ordered a 3 rail gas block from YHM for my .625 diameter CAR barrel. I plan on installing their Gas Block Front Flip Sight (#YHM-9584) on it. This gas block is not listed on their web site, but I sent them an email and was advised they carried the .625 size. The rails are at the 12, 3 and 9 o'clock positions. |
|
|
Hey, just found this thread after calling this morning, but now I'm a bit confused... When I called, I was told that the threaded 16" LW barrels are actually only 15.5", and so will need to have a permanently attached muzzle device - 16" versions were planned but not until the current stock was sold. However, this thread seems to say that the preban (which I assume to mean threaded) 16" versions are available now...
But my intention was to mount a longer YHM FF rail tube as well, so the .625 gb is a problem. However, good news that YHM offers the low-pro blocks, though not listed. If the 16" threaded versions are indeed available, any chance I could get it with one of the .625 YHM low-pro GB's mentioned above? Thanks, Rocko |
|
The barrels that are 15.5" are our lightweight tactical barrels (fluted HBAR's with a brake or flash hider permanently attached to be legal 16"), the actual lightweight barrels are the A-1 contour barrels. Sorry for the confusion.
We can do one with the YHM .625" gas block, I'll just have to get some in stock, I wasn't aware that they offered one in that diameter. Jesse |
|
Excellent! Can I place the order now, or should I wait until you get confirmation on the GB's? Rocko |
|
|
Would you happen to be coming to the King of Prussia show this weekend? If so stop by and we can get the order put in, and I can get the blocks on order Monday.
Jesse |
|
You guys going to be at the Knob Creek Machine gun shoot in October?
Also..is it possible to get your 11.5" chrome lined barrel with a normal A2 flash supressor instead of the 5" FS? |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.