User Panel
Posted: 9/22/2009 9:13:54 AM EDT
Does anyone know who has some in stock? I ordered one online at one place when they came out, and apparently they sold out and never let me know. I just cancelled my order with them since there is no ETA for another batch. Are they goanna make more? I gotta get me some BAD!
I got a fever! And the only prescription... is at least one BAD lever! |
|
I'm wondering the same thing. I don't understand why Magpul doesn't make enough of their new products to go around for a while. Something new from them comes out & sells out within a day with no ETA for new shipments in a timely manner. I need a BAD & MS2!
|
|
I just ordered from Bowers Tactical. They showed as in stock. If ya wanna get price gouged there is always ebay. Also saw one on the ee for the ridiculous amount of 60 bucks.
|
|
Quoted:
I'm wondering the same thing. I don't understand why Magpul doesn't make enough of their new products to go around for a while. Something new from them comes out & sells out within a day with no ETA for new shipments in a timely manner. I need a BAD & MS2! I don't know how many they have sold, but I know that JUST AIM has already shipped hundreds of them. At some point they have to limit the initial run so they can see the market reaction. |
|
I got one through AIM, nice little piece, it looks big in the pics, buts its just a tiny little thing...Its cute...HAHA
|
|
Rainier has them in stock. At least the site says so. Just ordered one.
|
|
Quoted:
I hope they do, I just put an order in Just got shipping confirmation this morning from Rainier. |
|
|
ordered mine from magpul directly, monday and it shipped thursday
|
|
|
|
Don't miss the fine print... These are NOT in-stock! Ordering one would be pre-ordering and due to store software limitations, all pre-orders are charged when placed |
|
Hopefully mine will be here from brownells soon... I think I ordered them around the 10th. At least I got my MS2 yesterday to hold me over until then
|
|
From the EE, looks like Black Weapons Armory has them in stock.
But someone also posted the shipping was a bit much, I don't know from any first hand experience so I don't want to say either way. Just a heads up for those on the hunt. I already got a couple from my local dealer so I'm set |
|
Quoted:
From the EE, looks like Black Weapons Armory has them in stock. But someone also posted the shipping was a bit much, I don't know from any first hand experience so I don't want to say either way. Just a heads up for those on the hunt. I already got a couple from my local dealer so I'm set Called them today (9-26-09) before they closed and they said every BAD they had was being sent out on internet orders, but to check next week because they are expecting another shipment. |
|
As of Friday afternoon, two of them are hanging on my ARs Direct from Magpul. Oh...and they work great!!! A buddy has a "custom" lever on his and after running mine for 5 minutes he said, "Damn. They really thought this thing through..." |
|
How do you order directly from Magpul when it says "coming soon" on the website?
|
|
Quoted:
How do you order directly from Magpul when it says "coming soon" on the website? Sometimes it pays to be nice to those lovely ladies that answer the phone... Things I learned about ordering online, is call first, then order.. Websites don't always get updated as fast as inventory revolves. |
|
Mine just arrived from Bowers Tactical. Plus 1 to them for quick shipping at a reasonable cost.
I wasnt planning on getting one of these. I was mainly looking cause my brother wanted one and I was more likely to catch one in stock. I decided, what the heck, and picked one up for myself. What a great item! Gone are the days of reaching around the rifle trying to manipulate the bolt catch. This is really a must have. |
|
Got mine in today...
Thoughts: Pretty cool, I'm worried about stripping it out so I might not have it tight enough... I'll keep an eye on it when I hit the range. I dicked around with it for a few minutes after installing it. Pretty intuitive, but I bumped the bolt closed a few times. Wonder if I'll do that on a reload? I think this thing will make clearing double feeds a lot easier, especially with an extended charging handle. This has got to be a "must have" for south paws. The B.A.D. along with a ambidextrous charging handle would make the M4 a hell of a lot easier to work with for lefties. |
|
Received my pair on Saturday.
I ordered them from Mooney's last week, don't know when they'll get more but you might check with them. |
|
Personally speaking, I would have liked to have seen a one-piece unit.
|
|
I was able to pick one up from the Gun Gallery table at the Silencer Shoot last week along with a MS2 sling and other goodies. They had 30-40 of them and they were gone before 10AM. Slings a couple hours later. Good prices.
Easy transaction, just had to fly from WI to GA and back..... |
|
|
|
I just bought the last one my girlfriend is mad now that I didn't get her one though
|
|
|
|
I just ordered 3. Their website says it wont let you place the order if the item isn't in stock. I'll give it a try and see what happens. Thanks for the heads up!! |
|
Quoted:
They're all on eBay. Seriously... For double the price. |
|
Quoted:
I just ordered 3. Their website says it wont let you place the order if the item isn't in stock. I'll give it a try and see what happens. Thanks for the heads up!! Got my shipping confirmation. so far so good! |
|
Just ordered one. |
|
Got both my orders from bravocompany and mooney's shipped today!
|
|
I just picked up two plus another MBUS pair at Mooney's. It's just down the Interstate from me, He told me he's got several left as of 5:00 PM Friday.
|
|
Hey guys, will this work with the KNS Gen 2 trigger pins installed on a lower? I'm wondering if there will be enough clearance for the B>A>D> to work on my lower with the KNS pins.
|
|
Quoted:
Hey guys, will this work with the KNS Gen 2 trigger pins installed on a lower? I'm wondering if there will be enough clearance for the B>A>D> to work on my lower with the KNS pins. Yes, it will work. |
|
I received my B.A.D. lever today from Bravo Company. Ordered last Wednesday. Works great.
Gene |
|
Got mine yesterday from BCM and Mooney's :)
http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs255.snc1/10223_1180525867088_1046400151_30467375_5441795_n.jpg and for those who were wondering whether or not it works with the KNS Gen II pins: http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs275.snc1/10223_1180526227097_1046400151_30467384_3728929_n.jpg Lots of clearance |
|
I see a few people saying they got them from Magpul, directly..
This is what Magpul emailed me.. "I apologize we are not selling them directly. We have shipped a very select few to our dealers. Please contact one of them to get on a backorder list. Brownell’s will probably be your best bet. Thank you," I can't find any in stock. |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.