This web page has it for download. It's contained in the below file in the "gbdf" folder
Look for the below link once you get to the web page
"HP USB Flash Drive Format Tool (Archive password is "pasta")"
NOTE: I HAD TO USE THE PASSWORD "pasta" TO UNZIP THE FILE
Also, this is the only utility I have found that will work to make my USB memory stick DOS bootable. I tried about 8 utilities today.
It's really easy and only takes about 30 seconds.
1. Download the above USB_Boot.zip file and unzip it.
2. Then run the SP27213.exe file (this will install the HP USB utility on your PC)
3. Plug in your USB stick (warning: running the program in number 4 will delete everything on your USB stick)
4. Go to the program menu (start / programs) and look for "Hewlett Packard Company" and then click the USB program.
5. The program will open and should show your USB stick under "device" at the top. Check the 2 boxes that say "Create a DOS startup disk"
and "using DOS system files located at" and browse to the "DOS System Files" folder in the USB_Boot.zip file that you unzipped.
6. Click "start" and it will create your bootable memory stick
Then go to the "gbdf / GHOST" folder that was in the USB_Boot.zip file and copy the "ghost.exe" file to the memory stick.
To use Ghost, just boot your system with the memory stick (may require setting your BIOS setting to "boot first from USB" - or try the boot menu, mine is F10), and when it gets to the DOS prompt (mine say "C:") for the memory stick, just type "ghost" and hit enter. Then the Ghost menu will appear.
If you don't have a spare memory stick, you can put the ghost.exe file on a bootable floppy.