Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
User Panel

Posted: 10/21/2001 6:33:15 AM EDT
I'm thing about getting a M-9 LNIB w/five highcaps for $475.00.

Looking for some last min. feed back befor I do the deal.

Any of you guys have/had one?
Link Posted: 10/21/2001 6:40:40 AM EDT
[#1]
Sounds like a hell of a deal,if you pass on it HOOK ME UP!
Link Posted: 10/21/2001 6:44:30 AM EDT
[#2]
Well the guy ows me some money or I would not get it for that.
Link Posted: 10/21/2001 6:52:12 AM EDT
[#3]
a2, by "M-9" I assume you mean a Beretta 92F.

Make sure those hi-caps are Beretta factory mags and not cheapo aftermarket.

If that pistol is really LNIB, then that's a pretty deal.

DaMan
Link Posted: 10/21/2001 6:59:59 AM EDT
[#4]
3 are cheap 15 rounders but the other 2 are factory 20rounders[:)]
Could I just use the 3 for range mags?

PS:it is a Beretta 92 but it;s the one with military marks so evrybody calls it a M-9.
Link Posted: 10/21/2001 7:20:30 AM EDT
[#5]
Shoot the gun first.  It should be a good, accurate, very reliable gun with a nice trigger, reeking of history as the standard sidearm of the US military, made by the oldest commercial concern on the planet.  But it wouldn't hurt to run a mag or two through it just to make sure it's really LNIB.
Link Posted: 10/21/2001 8:00:29 AM EDT
[#6]
a2, I've never heard of Beretta factory 20rd. mags, but then again most of my experience with the M9 was in the military (standard mag is 15rds.).

I would think that pistol originally came with two 15rd. factory mags.

Since the deal includes 3 mags of dubious quality, $475 is probably an "OK" price, but it's not a SUPER deal.

DaMan
Link Posted: 10/21/2001 8:06:38 AM EDT
[#7]
They say Beretta on the foot plates,could somebody take them off of the the real mags and put them on the cheap ones?

Hell may they are 15rd Beretta mags?

Thye 20 rounders don't stick out or anything,is there some other way the you know of to tell?
Link Posted: 10/21/2001 8:30:42 AM EDT
[#8]
If they were 20 rnders,they would definately stickout.I would bet you've got factory 15 rnd mags.
Link Posted: 10/21/2001 8:37:27 AM EDT
[#9]
Here is a factory 20 rounder also.It stick out about a 11/2"
Link Posted: 10/21/2001 8:37:53 AM EDT
[#10]
a2, if they don't extend below the grip, they are probably the original 15rd. Beretta mags. that came with the pistol.  And they are good!

I am NO Beretta expert!  But, this sounds like an "OK" deal at best!

Check it over carefully and offer less.  If your friend thinks those aftermarket mags are SO valuable, tell him to keep them to sell seperately and base your offer on what you think the pistol and the two ORIGINAL magazines are worth.

DaMan  
Link Posted: 10/21/2001 8:51:05 AM EDT
[#11]
a2carbine:

I recommend the M9.  I purchased one and was amazed how easy it was to shoot.  The standard trigger is not competion smooth but that can be helped by a good gunsmith without destroying its reliability.  This pistol is designed for a service life of 30,000 rounds of +P+ (NATO) ammunition.  Aftermarket sites can be added if you wish.

I like how the Beretta fits my hand and I shoot well with it.  Straight out of the box, It will group Speer Gold-Dots into 4 inches at 25 meters with me doing my part.

P. Beretta high cap mags are 15 rounds and can be found quite easliy at gun shows and the like.  Prices vary depending on the needs of the seller; they range from $20 to $50.  My guess is the 20 rounders are aftermarket, unless the are Beretta marked.  If so, then I learned something new today.

The M9 runs about $560 new from dealers willing to give a little.  You are not getting hurt at $475 for a LNIB pistol.  The magazines are a gimme unless they are P. Beretta marked.

HTH....Geno
Link Posted: 10/21/2001 12:08:18 PM EDT
[#12]
Ok guys thanks,I think I'll jump on this one.

Thats good to know about the +P+ I was thinking about that.

The Ammo Man has a buch of +P+ NATO.
Link Posted: 10/21/2001 12:19:31 PM EDT
[#13]
I saw nib m-9'S WITH 1 FACTORY HIGH CAP FOR 489 IN THE LAST GuN SHOW!!
Link Posted: 10/21/2001 2:18:23 PM EDT
[#14]
Quoted:
They say Beretta on the foot plates?
View Quote


The factory 15rd mags I have are marked PB CAL 9 PARA on the mag bodies, not the floorplates. Are different batches of factory mags marked differently?
Link Posted: 10/21/2001 2:32:47 PM EDT
[#15]
As info:

Yes, Beretta did sell factory 20 round magazines.  They were originally made for the Model 93 machine pistol but also work in the 92 series.  I don't know if they still make the 20 rounders for LEOs.

BTW, the gun used by the cyborg Officer Murphy in the movie [i]Robocop[/i] was a modified Beretta 93.
Close Join Our Mail List to Stay Up To Date! Win a FREE Membership!

Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!

You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.


By signing up you agree to our User Agreement. *Must have a registered ARFCOM account to win.
Top Top