User Panel
User Panel
User Panel
|
Posted: 8/29/2001 6:49:07 PM EDT
[#1]
I've got the PSS which is pretty much the same gun. The stock is a little different. I bought the PSS because it doesn't have the keyed lock on the bolt. The gun is pretty much new so I haven't shot it too much But it likes Federal gold medal and IMI match really well (.3-.5). When I'm plinking I've used some Winchester USA and some Santa Barber mil-spec stuff, both of which shot from 1 to 1.2 inches.
Matt |
|
|
|
Posted: 8/29/2001 6:54:33 PM EDT
[#2]
Here's my 700 VS LH in .308 below. I just got it broken in recently, so I heaven't been able to jump whole heartedly into experimentation. Also included is a group that I shot during the break-in period which featured a handload of AA 2460 and a Sierra 150 grain BTSP. As for plinking ammunition, I really don't intend to shoot many factory loads, but I do like the Remington UMC stuff. This gun has a good chamber and a high quality barrel. I'm not putting any junk ammo in it.
[img]http://communities.msn.com/_Secure/0OgAAAKgTZB3UoK3Py7xQMQuSr4l2eUW5oYE26NVOdRoEDyvmI2tAfxnbSjiwJvDXB*o5KooT3wWI8jkCnWx*27gEhMI16mN*/DSC00003.jpg[/img] [img]http://communities.msn.com/_Secure/0OgAiIA4UKjM4UK6TebsSvX*63*YhhqorwzSAeTktaH6wXKD6QyIY4OLG4FJms8Zxtn3lHd20qJMmSJCHF7hlrgQ5ZMwBiRNE/dsc00009.jpg[/img] |
|
|
|
Posted: 8/29/2001 6:56:21 PM EDT
[#3]
I bought the PSS because it doesn't have the keyed lock on the bolt. Mine doesn't either. When did this allegedly occur? |
|
|
|
Posted: 8/29/2001 7:04:00 PM EDT
[#4]
They started putting the locks on the guns pretty recently. I originally ordered a VS but it had the lock on it which I didn't know about at the time so I turned around and sold it to get the PSS. I probably doesn't affect the way the gun shoots but I just didn't like it. I figured since I was spending that much money on a gun it better be what I want. Anyhow, I think they put them on all of their guns now because I've got a new 870 that has it
Matt |
|
|
|
Posted: 8/29/2001 7:16:21 PM EDT
[#5]
What is the typical range you guys zero a bolt action .308 at? Also, what are you guys running as far as glass on your rifles? Magnification?
|
|
|
|
Posted: 8/29/2001 7:33:01 PM EDT
[#6]
The range that I shoot on only goes to 125 yards, but if you can learn your reticle subtensions, bullet drop, how to "dope" wind, etc., then it's possible to make accurate hits far beyond that. As long as you're comfortable, that is. As for glass, I'm using a Leupold Vari-X III 4.5x14. I picked it based on these criteria: I wanted a scope that was capable of the same accuracy as the rifle, i.e. 1/4 MOA adjustments, an adjustable objective, light enough to be portable, available sunshades, matched to the finish of my rifle, and high quality: no trashco, no simmons, no bushnell, no bsa (which really means bastard stopped again). You get the idea. I got it at Bear Basin Outfitters. They beat the hell out of SWFA and have free shipping on orders over $250 [url]http://www.bearbasin.com[/url] I'm going to try some Varget next in this rifle.
|
|
|
|
Posted: 8/29/2001 7:41:44 PM EDT
[#7]
I like to Zero at 250 yds. That way you can hit something about the size of a deer shoulder at 100 to 350 yds. without adjusting the scope. I'm using the Tasco SS 10 x 42m. I like the scope, it seems to be a rugged dependable scope. A friend of mine owns a farm and during deer season while riding the fence lines occasionally he'll stop and take a doe. I've seen him make 3 different shots on deer at over 500 yds. all of which were perfect hits. Anyhow the point is, he has one on his rifle, which is identical to mine and he just throws it in the truck with him until he sees a deer and his truck has no shocks left which makes for a very rough ride and it seems to retain perfect zero. I also have 2 leupold VXIII's that I like. One is 3.5-10 x 50 and the other is 6.5-20 x 40. When buying a scope, just remember, you get what you pay for. And I hate to see some one put a $150 scope on a $700 rifle.
MAtt |
|
|
|
Posted: 8/29/2001 8:05:23 PM EDT
[#8]
Quoted: I bought the PSS because it doesn't have the keyed lock on the bolt. Mine doesn't either. When did this allegedly occur? In the year 2000 |
|
|
|
Posted: 8/29/2001 8:21:33 PM EDT
[#9]
Doesn't that POS lock just suck? I bought the wife a BDL for Christmas last year. First I was not happy that there is no such thing as a detachable box mag rifle, even though they tout it on their website. I called all over the country, but none were available. So I settle for the floorplate model and when it arrives, WTF, there's a PC lock on the bolt. It's a week before Christmas, so we're stuck with it. A ridiculous solution to a nonexistent problem, to quote Col. Cooper. The rifle is a decent enough shooter with the small amount of time I've spent on it. RP cases with 50gr. of IMR 4895 and a Sierra bullet--150gr. HPBT SP. shoot right at an inch (3 shots @ 100yds.). Certainly good enough for minute-of-deer. One other thing, I like Leupold. They did tick me off when I found their one piece base only covers three of the four holes on the action and partly covers the breech opening, which makes it harder to load through it, which further aggravates the fact I don't have a detachable box mag. When I called they said they would exchange it for a two piece, which is okay, I guess. I should mention their 3.5-10X--50mm silver scope to match the stainless rifle is a gift from Heaven. My wife loves the rifle/scope, so all is well.[:D]
|
|
|
|
Posted: 8/29/2001 8:40:39 PM EDT
[#10]
Beekeeper - what DM were you looking for?
|
|
|
|
Posted: 8/29/2001 9:14:36 PM EDT
[#11]
Quoted: Beekeeper - what DM were you looking for? Model 700 BDL, stainless, synthetic stock, .30-06, DM. That's what we wanted. Too late now as I had the stock laser engraved with a buck's head and my wife's name and the date Santa brought it. She's happy and doesn't know the difference. Ignorance is bliss. [:D] |
|
|
|
Posted: 8/29/2001 9:24:52 PM EDT
[#12]
Hey Beekeeper,
I don't know if this would be of any help to you, but you might consider this: If you sent me your stock and original BDL kit (floorplate/triggerguard, spring, follower), I'd relieve the stock, inset a factory DM trigger guard and provide you with one factory magazine. Price is $100, including return shipping. |
|
|
|
Posted: 8/29/2001 9:46:50 PM EDT
[#13]
Quoted: Hey Beekeeper, I don't know if this would be of any help to you, but you might consider this: If you sent me your stock and original BDL kit (floorplate/triggerguard, spring, follower), I'd relieve the stock, inset a factory DM trigger guard and provide you with one factory magazine. Price is $100, including return shipping. I am definitely interested--thanks! I can't do it right now as we are moving this week. Well, actually, we are moving my wife in with me--long story. Please e-mail me and I will send you my addy, then please send me your card, literature, or whatever will allow me to contact you later, in a month or so. Obviously I have to work around deer season and appropriate practice time. Are you a 'smith in business? One question--is it the same as factory original? I assume other factory mags fit no prob? Again, thanks! Mike |
|
|
|
Posted: 8/30/2001 4:29:31 AM EDT
[#14]
In the year 2000 I bought mine in November of 2000. Must not've been the entire 2000 production year or left-handed rifles were last. |
|
|
|
Posted: 8/31/2001 7:30:36 AM EDT
[#15]
Quoted: This one is a VS in 308. Got it to keep my LSS in 7mm Ultra Mag company. Anyone else have a VS in 308? What ammo does it like best? What do you use plink with? |
|
|
|
Posted: 8/31/2001 4:10:05 PM EDT
[#16]
[img]http://albums.photopoint.com/j/View?u=979545&a=10432123&p=47429299&Sequence=0[/img]
Three shot group with factory 7mm Ultra Mag Remington 140gr. Partition at 100 yards, the rifle is bone stock. Scope is a Simmons 2.5-10x42mm. Yeah, i'd say it shoots pretty well. ;) |
|
|
|
Posted: 8/31/2001 4:38:38 PM EDT
[#17]
Mine likes BlackHills Match ammo. Use Rem UMC to get it on the paper between the 100yds its cheaper. [sniper]
|
|
|
|
Posted: 9/1/2001 4:32:51 PM EDT
[#18]
My Girlfriend and I took it to the range today. With American Eagle 150gr. FMJBT ammo, it shot the group you see below. The flier is a result of the shooter (me) jerking the rifle due to the report of a very loud, 'braked AK-47 about 3 feet to my left just as I squeezed the trigger. I took another shot and it put the third round into one ragged hole at 100 yards. The coin to the right is a 5 cent piece.
[IMG]http://albums.photopoint.com/j/View?u=979545&a=7190417&p=53637160&Sequence=0[/IMG] [IMG]http://albums.photopoint.com/j/View?u=979545&a=10432123&p=53636169&Sequence=0[/IMG] |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
