Design your own guns!

[ARCHIVED THREAD] - Design your own guns!

Posted: 12/29/2005 4:43:26 AM EDT

What would you like to see from the firearms manufacturers if you were in control? For me...

Kahr: PM45 GAP pistol. A 45 cal that I wouldn't mind wearing.

FN: FS3000, similar to the FS2000 but in 308. A modern MBR with a 20" barrel but an OAL short enough to be used in CQB situations in a pinch. It'll take FAL mags.

Posted: 12/29/2005 4:46:25 AM EDT

[#1]

They mostly already make it, it just needs more testing and more people to make ammo for it -

6.8 SPC gas operated AR upper that can use regular AR mags.

Posted: 12/29/2005 4:53:53 AM EDT

[#2]

I'd like a 2 in 1 pistol with-

1) A frame that would allow me to put on either a short slide for CCW, or a regular size slide for range shooting/hunting.
2) A grip to be short enough for CCW, but have a solid snap on addition to let me use longer mags.

This would make one gun two- sort of a G-26 that could be converted to a G-17.

Posted: 12/29/2005 4:59:15 AM EDT

[#3]

a SHRIKE!!!1

oh, nevermind

not a new gun, but i'd love to see more rimfire rifles come with high capacity magazines. i've never understood why manufacturers refuse to go over 10 rounds. you're pretty much limited to a 10/22 or .22 ar upper.

Posted: 12/29/2005 5:06:40 AM EDT

[#4]

Quoted:
a SHRIKE!!!1

oh, nevermind

not a new gun, but i'd love to see more rimfire rifles come with high capacity magazines. i've never understood why manufacturers refuse to go over 10 rounds. you're pretty much limited to a 10/22 or .22 ar upper.

Or a pistol. Hello!!! Sig Mosquito! Magazine capastity = 10. WTF! You can't fit 20 in that grip?????

Posted: 12/29/2005 5:17:47 AM EDT

[#5]

Quoted:

Or a pistol. Hello!!! Sig Mosquito! Magazine capastity = 10. WTF! You can't fit 20 in that grip?????

if i'm not mistaken, walther put ot some "high capacity" 12 round mags for the p22

it may not be much more, but i wouldn't mind a couple for my G22.

on a side note, i've seen people weld .22 mags togther to make 20 round mags. according to them, it works, but it sure does look awful from the couple pictures i've seen at rimfirecentral...

Posted: 12/29/2005 5:26:22 AM EDT

[#6]

M1A or M14 on .300 WSM.

Posted: 12/29/2005 6:45:41 AM EDT

[#7]

AR-20

20Ga AR-15 upper.

Posted: 12/29/2005 6:50:06 AM EDT

[#8]

Quoted:
AR-20

20Ga AR-15 upper.

Does a 20 ga shell fit in a standard AR magwell?

Could do .410

Evil squirrel wrecker. Stick a .410 upper on a full auto lower. 20 round mag of number 6 shot.

Posted: 12/29/2005 9:29:00 AM EDT

[#9]

doubke stack sig p220

Posted: 12/29/2005 9:40:22 AM EDT

[#10]

MP5 in 50BMG.....

Posted: 12/29/2005 9:42:43 AM EDT

[#11]

A Full auto M82A1 witha 12" barrel

Posted: 12/29/2005 9:44:35 AM EDT

[#12]

Simple request here...

Ruger Mark II pistol in .17 HMR. I'd settle for HM2, but the HMR is a better round.

Posted: 12/29/2005 10:03:31 AM EDT

[#13]

9mm suppressed full-auto FS2000

Posted: 12/29/2005 10:06:40 AM EDT

[#14]

An AK-47 in .458 SOCOM would be cool!

Posted: 12/29/2005 10:09:06 AM EDT

[#15]

Quoted:
An AK-47 in .458 SOCOM would be cool!

God I miss Tromix...

Posted: 12/29/2005 10:10:11 AM EDT

[#16]

Single stack Glock in .45 ACP, with the same grip angle as a 1911

Posted: 12/29/2005 10:12:10 AM EDT

[#17]

Sig P226 X-5 Tactical in DA/SA 9mm *Germans have um*

Sig P225 or P239 in .380 (excellent CCW potential)

Rock River Varmit A4 in .204 Ruger (Les Baer = $$$)

AR-15 Upper in .17HMR (practice, youth, lady, training)

DSA58 in a smaller cartridge?

Nice thread topic.

Posted: 12/29/2005 10:12:25 AM EDT

[#18]

Quoted:
Quoted:
An AK-47 in .458 SOCOM would be cool!

God I miss Tromix...

What do you miss about them?

www.tromix.com/Welcome.htm

Posted: 12/29/2005 10:17:45 AM EDT

[#19]

Plasma Rifle in the 40 watt range.

Posted: 12/29/2005 10:21:13 AM EDT

[#20]

Modular upper/lower AK-74 in 6.5 with AR type sights and the rear sight base set farther back.

Posted: 12/29/2005 10:58:01 AM EDT

[#21]

ok ok. I have a new one.

That bad bitch with a Middy gas system, 14.5" 1/7 Barrel with proper M4 front sight base.
Pimp Juice.

Posted: 12/29/2005 10:59:52 AM EDT

[#22]

J-frame in ~~.44-mag~~ .454 Casull....

Posted: 12/29/2005 2:24:26 PM EDT

[#23]

Thought of another one. A G3 with integral rail, the existing telescoping stock, and gas piston operation so it doesn't beat the crap out of your shoulder.

Posted: 12/29/2005 11:38:16 PM EDT

[#24]

Quoted:
Quoted:
Quoted:
An AK-47 in .458 SOCOM would be cool!

God I miss Tromix...

What do you miss about them?

www.tromix.com/Welcome.htm

Sweet! He's back! I know he had an AK in .458 SOCOM in the works

Posted: 12/30/2005 12:10:26 AM EDT

[#25]

A Belt-Fed H&K Soccom pistol.

Posted: 12/30/2005 12:14:21 AM EDT

[#26]

Quoted:
Quoted:
An AK-47 in .458 SOCOM would be cool!

God I miss Tromix...

well Tony is back in action....hes alive and well

Posted: 12/30/2005 12:38:14 AM EDT

[#27]

I'd like some sort of beverage dispenser on my gun. Also some Silver lady stickers. An airhorn. And more cowbell.

Posted: 12/30/2005 1:15:29 AM EDT

[#28]

I'd like to see a pistol desined specifically for home defense. Instead of a combat/LE pistol that you can use for home defense. It would need a built in flashlight, instead of just rails, integral night sights, and would have to be magna ported to reduce recoil for quick follow up shots.

Also, I'd like to see one made so it is as simple to operate as a Glock but with better safety features. Basically a pistol that the average non-gun nut can have in the house and still be safe.

Oh yeah, and I'd like to see our new XM-8's chambered in 6.8 instead of 5.56. And with the weapons sight controls mounted on the handguards so you don't have to move your hand or head to change from red dot to magnified sights.

Posted: 12/30/2005 1:45:38 AM EDT

[#29]

Glock carbine.

Posted: 12/30/2005 2:47:31 AM EDT

[#30]

A US made Daewoo clone with the features dr200 but with pistol grip and 16" barrel and a Hk type collapsable stock

the only bad thing ive ever heard about the daewoo is that if you loose a part your screwed

Posted: 12/30/2005 4:17:42 AM EDT

[#31]

Quoted:
I'd like some sort of beverage dispenser on my gun. Also some Silver lady stickers. An airhorn. And more cowbell.

I think TheRedGoat can help ya out.

Can't find the pic but, its an EBR cupholder basically.

Posted: 12/30/2005 4:21:17 AM EDT

[#32]

Quoted:
What would you like to see from the firearms manufacturers if you were in control? For me...

Kahr: PM45 GAP pistol. A 45 cal that I wouldn't mind wearing.

FN: FS3000, similar to the FS2000 but in 308. A modern MBR with a 20" barrel but an OAL short enough to be used in CQB situations in a pinch. It'll take FAL mags.

How about a kahr in .45 ACP?

www.kahr.com/newvr_kp4543.html

Posted: 12/30/2005 6:35:30 AM EDT

[#33]

1) Winchester re-issues the M1Carbine, Garand and semi auto M14 ( forged receivers, not cast)

2) Ruger Mini-308, Mini .243 in GB profile with bayo lug and accuracy problems resolved

3)An INEXPENSIVE polymer-stainless steel inserts .22 RF upper for the AR15

4) Reliable 15 or 20 round mags for the Ruger .44 mag Deerfield carbine

5) An inexpensive after market 10/22 receiver to build up all my cast off barrels and stocks

6)A compact Glock carbine that takes pistol mags

7)Mass produced .22 RF hand cranked gatling gun, fed by dumping boxes of bulk rounds in a hopper

Posted: 12/30/2005 6:37:39 AM EDT

[#34]

They already make it. It's called an FAL.

Posted: 12/30/2005 6:56:14 AM EDT

[#35]

A 50BMG derringer. Just because.

[ARCHIVED THREAD] - Design your own guns!

General » General Discussion

Warning

Confirm Action

About AR15.COM

Stay Connected

Newsletter

Contact Us