It's not going to be long before the first YF-35 is complete.

Press Release Source: Lockheed Martin Aeronautics Company

F-35 Wing Assembly Begins at Lockheed Martin
Monday August 23, 4:10 pm ET

FORT WORTH, Texas, Aug. 23 /PRNewswire-FirstCall/ -- Assembly of the wing for the first F-35 Joint Strike Fighter started today at Lockheed Martin (NYSE: LMT - News) in Fort Worth, less than two months after the plant initiated the aircraft's forward-fuselage assembly.

"With wing assembly under way, and with aft-fuselage assembly expected to begin this week, all of the F-35's four major subassemblies will be in production," said Bob Elrod, Lockheed Martin executive vice president and F-35 JSF program general manager. "The F-35's advanced, modular assembly process is designed to increase production speed dramatically while improving quality and reducing costs."

BAE SYSTEMS will begin production of the aircraft's aft-fuselage in Samlesbury, England, this week. Northrop Grumman's Palmdale, Calif., facility started center-fuselage assembly in May. The first F-35, a conventional- takeoff-and-landing model, is scheduled to be completed in 2005, with first flight scheduled for 2006.

The first phase of wing assembly started Monday when workers loaded an aluminum bulkhead and a front spar onto an assembly fixture. Nine more spars will be added to complete the wing skeleton. Once the skeleton is complete, the upper and lower carbon-fiber composite skins will be attached. It will then be mated to the other F-35 subassemblies beginning in the spring of 2005. Progressive, Inc., of Arlington, Texas, produced the wing bulkheads. The front spar was made by Thayer of St. Louis.

When the 35-foot wing's structural assembly is complete, technicians will add internal systems such as pumps, sensors and electrical components.

The F-35 is a next-generation, supersonic, multi-role stealth aircraft designed to replace the AV-8B Harrier, A-10, F-16, F/A-18 Hornet and the United Kingdom's Harrier GR.7 and Sea Harrier.

Lockheed Martin and its principal industrial partners Northrop Grumman and BAE SYSTEMS are employing an array of advanced and highly accurate manufacturing machines to help the F-35 achieve its goals of affordability, quality and assembly speed.

Three F-35 variants -- a conventional takeoff and landing (CTOL), a short- takeoff/vertical-landing (STOVL) and a carrier variant (CV) -- each derived from a common design will ensure that the F-35 meets the performance needs of the U.S. Air Force, Marine Corps, Navy, the U.K. Royal Air Force and Royal Navy, and allied defense forces worldwide, while staying within strict affordability targets.

Lockheed Martin is developing the F-35 in conjunction with Northrop Grumman and BAE SYSTEMS. Companies worldwide are participating in the F-35's development. Two propulsion teams, led by Pratt & Whitney and General Electric, are developing separate interchangeable engines for the F-35.

Lockheed Martin Aeronautics Co., a business area of Lockheed Martin, is a leader in the design, research and development, systems integration, production and support of advanced military aircraft and related technologies. Its customers include the military services of the United States and allied countries throughout the world. Products include the F-16, F/A-22, F-35 JSF, F-117, C-5, C-130, C-130J, P-3, S-3 and U-2. The company produces major components for the F-2 fighter, and is a co-developer of the C-27J tactical transport and T-50 advanced jet trainer.

Headquartered in Bethesda, Md., Lockheed Martin employs about 130,000 people worldwide and is principally engaged in the research, design, development, manufacture and integration of advanced technology systems, products and services. The corporation reported 2003 sales of $31.8 billion.

http://biz.yahoo.com/prnews/040823/dam033_1.html


XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

August 23, 2004
Nellis to get F-35s
Associated Press

LAS VEGAS — In about five years, Nellis Air Force Base, Nev., will add a new warplane to its fleet of fighter jets and bombers. A notice that will appear in Monday’s Federal Register calls for 36 of the nation’s F-35 Joint Strike Fighter jets to be produced and delivered to the base between 2009 and 2028.

Military officials have described the F-35 as an air combat workhorse, with versions being developed to meet the future needs of the Marines, Navy and Air Force.

The 36 warplanes coming to Nellis will be used to train instructor pilots and support the Air Force Weapons School’s mission of testing and evaluating state-of-the-art weapons systems and future combat capabilities.

The F-35 tactical fighter jets destined for Nellis will be some of the first off the assembly lines under a multi-billion-dollar program to replace the nation’s aging F-16 Fighting Falcons and A-10 Thunderbolt tank killers.

The F-16 and A-10 are both 1970s-vintage aircraft, although some F-16s still are being built for allied countries.

The F-35’s base price is about $40 million.

The two-page Federal Register notice calls for five public meetings on the proposal next month in Nevada.

Hangars and workshops will be built at Nellis to accommodate the F-35s beginning in 2007. Construction will take three years, but details about the number of personnel resulting from the basing plan were not available.

“The environmental impact process is expected to take about two years,” Nellis spokesman Mike Estrada said. “This is the same process we did for the F/A-22.” Nellis has eight F/A-22 Raptors and is expected to receive nine more in the next five or six years, Estrada said.

http://www.airforcetimes.com/story.php?f=1-292925-316829.php