User Panel
User Panel
User Panel
|
Posted: 2/23/2021 8:04:12 AM EDT
[#1]
Quote HistoryQuoted: You can't write g code? Quote HistoryQuoted: Quoted: Cura is a slicer which will turn the STL file for the 3D model you have into a gcode the machine will understand. It's honestly about the best out there, and comes with preloaded profiles for popular printers, like the Creality family of printers, including the Ender3. You can't write g code? I probably could, it's just been a while ????? |
|
|
|
Posted: 2/23/2021 8:05:09 AM EDT
[#2]
Quote HistoryQuoted:  Quote HistoryQuoted: Quoted: So, did the math. The lower cost $8.14 to print. Electricity was $3.52, and the filament was $4.62. And I was off on how much it takes to print a whole one. Closer to 77m instead of 170, so you could print four whole sets per spool. Yes? |
|
|
|
Posted: 2/23/2021 8:06:43 AM EDT
[#3]
Quote HistoryQuoted: It just kinda dawned on me but.....where the hell's phurba been? Helping his new wife through multiple surgeries. I think they're finally back home though. |
|
|
|
Posted: 2/23/2021 8:13:50 AM EDT
[#5]
Quote HistoryQuoted: That's my fetish. https://www.ar15.com/media/mediaFiles/191040/Screenshot_20210222-183430_jpg-1837248.JPG Im about it 
|
|
|
|
Posted: 2/23/2021 8:14:55 AM EDT
[#6]
Quote HistoryQuoted: We are talking about sex, right? Something like that |
|
|
|
Posted: 2/23/2021 8:16:16 AM EDT
[#7]
I'm up. I'm fed. Cup of coffee or two before work.
|
|
|
|
Posted: 2/23/2021 8:21:02 AM EDT
[#8]
Quote HistoryQuoted: And asks for more Quote HistoryQuoted: Quoted: Quoted: Quoted: You were at work. So yes. You missed it. Probably. About to start another 10hr day  Your boss sucks moose cock. And asks for more 
|
|
|
|
Posted: 2/23/2021 8:21:32 AM EDT
[#9]
Quote HistoryQuoted: Yes? Quote HistoryQuoted: Quoted: Quoted: So, did the math. The lower cost $8.14 to print. Electricity was $3.52, and the filament was $4.62. And I was off on how much it takes to print a whole one. Closer to 77m instead of 170, so you could print four whole sets per spool. Yes? Just think that's cool 
|
|
|
|
Posted: 2/23/2021 8:22:40 AM EDT
[#10]
Morning.
|
|
|
|
Posted: 2/23/2021 8:28:31 AM EDT
[#11]
Quote HistoryQuoted: Morning.  Why the sad face? |
|
|
|
Posted: 2/23/2021 8:28:44 AM EDT
[#12]
Quote HistoryQuoted: Morning. Why the sad face? |
|
|
|
Posted: 2/23/2021 8:29:15 AM EDT
[#13]
Quote HistoryQuoted: With his woman Quote HistoryQuoted: Quoted: It just kinda dawned on me but.....where the hell's phurba been? With his woman The one with cancer?! 
|
|
|
|
Posted: 2/23/2021 8:29:44 AM EDT
[#14]
Quote HistoryQuoted: I'm up. I'm fed. Cup of coffee or two before work. What did you eat |
|
|
|
Posted: 2/23/2021 8:30:08 AM EDT
[#16]
Quote HistoryQuoted: Morning. What’s wrong? |
|
|
|
Posted: 2/23/2021 8:30:26 AM EDT
[#17]
Quote HistoryQuoted: Helping his new wife through multiple surgeries. I think they're finally back home though. Wife?!?!?!?! |
|
|
|
Posted: 2/23/2021 8:37:25 AM EDT
[#18]
Quote HistoryQuoted: The one with cancer?! Quote HistoryQuoted: Quoted: Quoted: It just kinda dawned on me but.....where the hell's phurba been? With his woman The one with cancer?! 
|
|
|
|
Posted: 2/23/2021 8:37:34 AM EDT
[#19]
Quote HistoryQuoted: Wife?!?!?!?! Quote HistoryQuoted: Quoted: Helping his new wife through multiple surgeries. I think they're finally back home though. Wife?!?!?!?! I wasn't going to drop that bomb before he got back here to tell you fruits about it. |
|
|
|
Posted: 2/23/2021 8:37:59 AM EDT
[#20]
But Lube has zero fucks to give
|
|
|
|
Posted: 2/23/2021 8:44:07 AM EDT
[#21]
|
|
|
|
Posted: 2/23/2021 8:44:30 AM EDT
[#22]
Quote HistoryQuoted: Just think that's cool Quote HistoryQuoted: Quoted: Quoted: Quoted: So, did the math. The lower cost $8.14 to print. Electricity was $3.52, and the filament was $4.62. And I was off on how much it takes to print a whole one. Closer to 77m instead of 170, so you could print four whole sets per spool. Yes? Just think that's cool It'll be a lot cooler if it holds up to abuse. |
|
|
|
Posted: 2/23/2021 8:45:04 AM EDT
[#23]
Quote HistoryQuoted: Morning.
|
|
|
|
Posted: 2/23/2021 8:49:06 AM EDT
[#24]
Quote HistoryQuoted: But Lube has zero fucks to give We all congratulated him at Christmas on the engagement, I figured this was a natural progression When he popped in the other day, I meant to congratulate him anyways, but I forgot 
|
|
|
|
Posted: 2/23/2021 8:50:07 AM EDT
[#25]
Quote HistoryQuoted: It'll be a lot cooler if it holds up to abuse. Quote HistoryQuoted: Quoted: Quoted: Quoted: Quoted: So, did the math. The lower cost $8.14 to print. Electricity was $3.52, and the filament was $4.62. And I was off on how much it takes to print a whole one. Closer to 77m instead of 170, so you could print four whole sets per spool. Yes? Just think that's cool It'll be a lot cooler if it holds up to abuse. Very true. Would it help with structural integrity if it had an integrated pistol grip? Or would that make it too tall for the printer? |
|
|
|
Posted: 2/23/2021 8:50:13 AM EDT
[#26]
Quote HistoryQuoted: What did you eat 2 HB eggs and 2 sausage patties. Cut the egg in half with a sausage patty in between. It's a breadless sammich. |
|
|
|
Posted: 2/23/2021 8:50:31 AM EDT
[#27]
Quote HistoryQuoted: How the hell doe that even happen Could have hit something and dented the shaft which, in turn, weakened the shaft and allowed it to twist under load. |
|
|
|
Posted: 2/23/2021 8:50:57 AM EDT
[#28]
Quote HistoryQuoted: We all congratulated him at Christmas on the engagement, I figured this was a natural progression When he popped in the other day, I meant to congratulate him anyways, but I forgot Quote HistoryQuoted: Quoted: But Lube has zero fucks to give We all congratulated him at Christmas on the engagement, I figured this was a natural progression When he popped in the other day, I meant to congratulate him anyways, but I forgot I must have missed the announcement over Christmas. I had no idea until I saw Chef's post on fb
|
|
|
|
Posted: 2/23/2021 8:52:33 AM EDT
[#29]
Quote HistoryQuoted: I need to check the box stores for a carbine buffer assembly I've got a standard buffer, a safety selector, and an end plate at home. No tube. No spring. You need? |
|
|
|
Posted: 2/23/2021 8:53:09 AM EDT
[#30]
Quote HistoryQuoted: Very true. Would it help with structural integrity if it had an integrated pistol grip? Or would that make it too tall for the printer? Quote HistoryQuoted: Quoted: Quoted: Quoted: Quoted: Quoted: So, did the math. The lower cost $8.14 to print. Electricity was $3.52, and the filament was $4.62. And I was off on how much it takes to print a whole one. Closer to 77m instead of 170, so you could print four whole sets per spool. Yes? Just think that's cool It'll be a lot cooler if it holds up to abuse. Very true. Would it help with structural integrity if it had an integrated pistol grip? Or would that make it too tall for the printer? The weak point is the stretch from the buffer to the takedown pin. An integrated grip might add thickness, but you do run into height issues. I think how they've done it works. We'll find out. |
|
|
|
Posted: 2/23/2021 8:53:35 AM EDT
[#31]
Quote HistoryQuoted: 2 HB eggs and 2 sausage patties. Cut the egg in half with a sausage patty in between. It's a breadless sammich. Quote HistoryQuoted: Quoted: What did you eat 2 HB eggs and 2 sausage patties. Cut the egg in half with a sausage patty in between. It's a breadless sammich. Sounds good to me |
|
|
|
Posted: 2/23/2021 8:53:49 AM EDT
[#32]
Time for the twerking
|
|
|
|
Posted: 2/23/2021 8:54:24 AM EDT
[#33]
Quote HistoryQuoted: But Lube has zero fucks to give Typical Lube. Who got married? |
|
|
|
Posted: 2/23/2021 8:54:31 AM EDT
[#34]
Quote HistoryQuoted: The weak point is the stretch from the buffer to the takedown pin. An integrated grip might add thickness, but you do run into height issues. I think how they've done it works. We'll find out. Quote HistoryQuoted: Quoted: Quoted: Quoted: Quoted: Quoted: Quoted: So, did the math. The lower cost $8.14 to print. Electricity was $3.52, and the filament was $4.62. And I was off on how much it takes to print a whole one. Closer to 77m instead of 170, so you could print four whole sets per spool. Yes? Just think that's cool It'll be a lot cooler if it holds up to abuse. Very true. Would it help with structural integrity if it had an integrated pistol grip? Or would that make it too tall for the printer? The weak point is the stretch from the buffer to the takedown pin. An integrated grip might add thickness, but you do run into height issues. I think how they've done it works. We'll find out.  You going to run it 5.56 or 6.8? |
|
|
|
Posted: 2/23/2021 8:54:39 AM EDT
[#35]
Quote HistoryQuoted: I've got a standard buffer, a safety selector, and an end plate at home. No tube. No spring. You need? I've got an lpk, all I need is the buffer tube, spring, castle nut, and buffer
|
|
|
|
Posted: 2/23/2021 8:54:50 AM EDT
[#36]
   
|
|
|
|
Posted: 2/23/2021 8:56:04 AM EDT
[#37]
Quote HistoryQuoted: Sounds good to me Very delicious. Usually I fry the patties fresh and then fry the flat side of the egg in the grease but I just did ready to eat sausages today |
|
|
|
Posted: 2/23/2021 8:56:22 AM EDT
[#38]
Quote HistoryQuoted: You going to run it 5.56 or 6.8? Quote HistoryQuoted: Quoted: Quoted: Quoted: Quoted: Quoted: Quoted: Quoted: So, did the math. The lower cost $8.14 to print. Electricity was $3.52, and the filament was $4.62. And I was off on how much it takes to print a whole one. Closer to 77m instead of 170, so you could print four whole sets per spool. Yes? Just think that's cool It'll be a lot cooler if it holds up to abuse. Very true. Would it help with structural integrity if it had an integrated pistol grip? Or would that make it too tall for the printer? The weak point is the stretch from the buffer to the takedown pin. An integrated grip might add thickness, but you do run into height issues. I think how they've done it works. We'll find out. You going to run it 5.56 or 6.8? Start with 5.56, may eventually put some 6.8 through it. |
|
|
|
Posted: 2/23/2021 8:58:53 AM EDT
[#40]
Quote HistoryQuoted: I've got an lpk, all I need is the buffer tube, spring, castle nut, and buffer Quote HistoryQuoted: Quoted: I've got a standard buffer, a safety selector, and an end plate at home. No tube. No spring. You need? I've got an lpk, all I need is the buffer tube, spring, castle nut, and buffer Idk if it would make it to you in time, but damage industries has spring, buffer, end plate, and castle nut for $25. Usually free shipping too. |
|
|
|
Posted: 2/23/2021 8:59:22 AM EDT
[#41]
Quote HistoryQuoted: Very delicious. Usually I fry the patties fresh and then fry the flat side of the egg in the grease but I just did ready to eat sausages today Quote HistoryQuoted: Quoted: Sounds good to me Very delicious. Usually I fry the patties fresh and then fry the flat side of the egg in the grease but I just did ready to eat sausages today I nuked some frozen egg bite things. |
|
|
|
Posted: 2/23/2021 8:59:57 AM EDT
[#42]
Quote HistoryQuoted: Idk if it would make it to you in time, but damage industries has spring, buffer, end plate, and castle nut for $25. Usually free shipping too. That's a helpful lead. Thank you. |
|
|
|
Posted: 2/23/2021 9:00:07 AM EDT
[#43]
I also have those parts in my box, I could get them in the mail tomorrow, still dunno if it would get to you in time. Didn’t you say you wanted it for this weekend?
|
|
|
|
Posted: 2/23/2021 9:02:25 AM EDT
[#45]
Quote HistoryQuoted: I nuked some frozen egg bite things. Those could be good too |
|
|
|
Posted: 2/23/2021 9:03:17 AM EDT
[#46]
Quote HistoryQuoted: Those could be good too Quote HistoryQuoted: Quoted: I nuked some frozen egg bite things. Those could be good too I think they’re by lean cuisine, but they’re delish |
|
|
|
Posted: 2/23/2021 9:03:57 AM EDT
[#47]
Quote HistoryQuoted: The weak point is the stretch from the buffer to the takedown pin. An integrated grip might add thickness, but you do run into height issues. I think how they've done it works. We'll find out. I have a standard A2 grip too.... |
|
|
|
Posted: 2/23/2021 9:05:04 AM EDT
[#49]
Quote HistoryQuoted: I also have those parts in my box, I could get them in the mail tomorrow, still dunno if it would get to you in time. Didn’t you say you wanted it for this weekend? Saturday
|
|
|
|
Posted: 2/23/2021 9:07:44 AM EDT
[#50]
Quote HistoryQuoted: 2 HB eggs and 2 sausage patties. Cut the egg in half with a sausage patty in between. It's a breadless sammich. Quote HistoryQuoted: Quoted: What did you eat 2 HB eggs and 2 sausage patties. Cut the egg in half with a sausage patty in between. It's a breadless sammich. Ahh so a sausage patty in a roll. |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
