User Panel
It's a beauty.
Can you imagine what it looked like fresh out of the factory? I would say it would rival any custom gun. |
|
Who repairs these and restores them?
I have one that needs the safety repaired and I would like to have it checked. |
|
Quoted:
Who repairs these and restores them? I have one that needs the safety repaired and I would like to have it checked. I do not know. I will either do the wood myself or have my one of my two uncles that make furniture and restore wood do it. As for the metal I haven't decided. I'm not against bluing it, but I am leaning more towards having it look like the semi gloss black that it once was. |
|
I would not refinish that rifle, especially the metal. Looks good as is with a lot of history to it.
|
|
Awesome pics, #7 looks great
Edit: I wouldn't refinish it either. My Garand came with a CMP stock so I don't feel bad but my '43 mosin still has all the dings and gouges (including the ones I put there). I like the history personally. Some day you can give your kid that rifle and they'll keep adding to it. |
|
Does anyone know what the markings stand for? Or is there a decent website (other than arfcom ) where I can look them up. A lot of sites I have been directed too no longer exist
|
|
ROF Maltby manufacturered (the M in front of the year as well as the "1" in the SN", the arrow is the acceptance stamp, AH is the SN prefix,
The others are subcontractor markings SM - Singer Manufacturing S126 - S.E. Welstead Maltby rifles are known to be made from alot of subcontracted parts. |
|
Quoted:
ROF Maltby manufacturered (the M in front of the year as well as the "1" in the SN", the arrow is the acceptance stamp, AH is the SN prefix, The others are subcontractor markings SM - Singer Manufacturing S126 - S.E. Welstead Maltby rifles are known to be made from alot of subcontracted parts. thanks I thought that the SM was for singer but honestly wasn't sure. I suppose I need to find a bayonet and a sling now |
|
We have a C&R forum here, more experts in there than you can shake a stick at.
http://www.ar15.com/forums/f_6/14_Curios_andamp__Relics.html |
|
Nice rifle and pics, OP. Please don't refinish it. Doing so will reduce the value.
The Long Branch No.4 was made in Canada. They are considered to be among the best of the No.4s. Mine No.4 Mk.I was made at ROF Fazakerly in 1994, then FTRed (Factory Thorough Repaired) there in 1948. I bought it at Woolworth's in 1985 or so. .303 Ball will smack the 200 yard steel gong around with authority. In case you don't know, here is how to properly load a .303 clip to avoid rimlock: |
|
Quoted: ROF Maltby manufacturered (the M in front of the year as well as the "1" in the SN", the arrow is the acceptance stamp, AH is the SN prefix, The others are subcontractor markings SM - Singer Manufacturing S126 - S.E. Welstead Maltby rifles are known to be made from alot of subcontracted parts. This. Your example has a typical post WWII mix of parts and is in very good condition...enjoy it. I have a '43 Maltby that's very accurate it's one of my favorite No4's. |
|
Love the Enfields... have a few.
A couple of Long Branch, an Ishapore 2A1 .308 and a No. I, Mk.III* that was converted to single-shot .410 shotgun in India. Been saving my brass, now I need to get to reloading for it. |
|
Depending on what is wrong with the safety you can remove it (one screw) and bend the spring a bit. The spring is going to be the figure of eight looking part. I just had to do it to a 1918 No1 MkIII* that the safety was sort of working on. After the fix it is a fully fuctioning safety again.
|
|
Quoted: Nice rifle and pics, OP. Please don't refinish it. Doing so will reduce the value. The Long Branch No.4 was made in Canada. They are considered to be among the best of the No.4s. Mine No.4 Mk.I was made at ROF Fazakerly in 1994, then FTRed (Factory Thorough Repaired) there in 1948. I bought it at Woolworth's in 1985 or so. .303 Ball will smack the 200 yard steel gong around with authority. In case you don't know, here is how to properly load a .303 clip to avoid rimlock: Holy shit those things must cost a fortune if a time machine is involved in the manufacturing process! |
|
Quoted:
Your pics are so good I can smell it. Great rifles. oddly enough it was sitting in my safe next to one of your NDS-2s Anyone know a place where a guy can buy a bayonet and sling for this fine rifle? |
|
Fleabay is actually preaty good about Enfield stuff. It is not like German stuff where you have to look for forged stuff or modern stuff trying to be passed as WW2 issue. Otherwise IMA or a quick Google/Bing search will bring up a few places that deal with Enfield stuff.
|
|
Quoted:
Quoted:
Nice rifle and pics, OP. Please don't refinish it. Doing so will reduce the value. The Long Branch No.4 was made in Canada. They are considered to be among the best of the No.4s. Mine No.4 Mk.I was made at ROF Fazakerly in 1994, then FTRed (Factory Thorough Repaired) there in 1948. I bought it at Woolworth's in 1985 or so. .303 Ball will smack the 200 yard steel gong around with authority. In case you don't know, here is how to properly load a .303 clip to avoid rimlock: Holy shit those things must cost a fortune if a time machine is involved in the manufacturing process! I caught that too!! |
|
Quoted:
Fleabay is actually preaty good about Enfield stuff. It is not like German stuff where you have to look for forged stuff or modern stuff trying to be passed as WW2 issue. Otherwise IMA or a quick Google/Bing search will bring up a few places that deal with Enfield stuff. i figured as much, I just wanted to know if anyone knew of good dealers that don't have fakes |
|
That's a fine old rifle.
I have one just like it. It won't hurt a thing to refinish that stock. Just don't cut anything off. |
|
Nice piece.
they are sweet shooters, I had one with a brass butt plate...........shoulda kept it!!! |
|
Quoted: Fleabay is actually preaty good about Enfield stuff. It is not like German stuff where you have to look for forged stuff or modern stuff trying to be passed as WW2 issue. Otherwise IMA or a quick Google/Bing search will bring up a few places that deal with Enfield stuff. The danger with rarer Enfield parts is that the Indians still have the machinery and tooling to produce a lot of it and have been doing so for a number of years. This especially true of the No4mkIT sniper mounts, optics, etc. Not super hard to tell if you know what you're looking at, but some of it might fool a casual looker. Sling and bayo reproductions are out there too. |
|
Beautiful rifle. I'd leave it just the way it is.
Also, what did you do to take those great pics? I am utterly useless at that sort of thing. |
|
Quoted:
Love the Enfields... have a few. A couple of Long Branch, an Ishapore 2A1 .308 and a No. I, Mk.III* that was converted to single-shot .410 shotgun in India. Been saving my brass, now I need to get to reloading for it. Dirt cheap to shoot with reloaded ammo. Accurate too. But, keep in mind 2 facts about No. 4s: 1) they lock up at the rear of the bolt, not the front like a 1903 or Mauser or Rem. 700, and the actions flex during firing, plus 2) the chambers are cut very generously to tolerate "trench dirt" during combat. These 2 factors = limited brass life. The No. 4 really stretches out the brass. Just keep an eye on it. |
|
Nice. I just saw your FB post and was wondering where the pics were
|
|
Quoted: Quoted: Love the Enfields... have a few. A couple of Long Branch, an Ishapore 2A1 .308 and a No. I, Mk.III* that was converted to single-shot .410 shotgun in India. Been saving my brass, now I need to get to reloading for it. Dirt cheap to shoot with reloaded ammo. Accurate too. But, keep in mind 2 facts about No. 4s: 1) they lock up at the rear of the bolt, not the front like a 1903 or Mauser or Rem. 700, and the actions flex during firing, plus 2) the chambers are cut very generously to tolerate "trench dirt" during combat. These 2 factors = limited brass life. The No. 4 really stretches out the brass. Just keep an eye on it. +1, learn to anneal your brass if you want it to last. |
|
Quoted:
Quoted:
Quoted:
Love the Enfields... have a few. A couple of Long Branch, an Ishapore 2A1 .308 and a No. I, Mk.III* that was converted to single-shot .410 shotgun in India. Been saving my brass, now I need to get to reloading for it. Dirt cheap to shoot with reloaded ammo. Accurate too. But, keep in mind 2 facts about No. 4s: 1) they lock up at the rear of the bolt, not the front like a 1903 or Mauser or Rem. 700, and the actions flex during firing, plus 2) the chambers are cut very generously to tolerate "trench dirt" during combat. These 2 factors = limited brass life. The No. 4 really stretches out the brass. Just keep an eye on it. +1, learn to anneal your brass if you want it to last. I have never tried annealing the brass. I do neck-size only, but even doing that, the brass doesn't last long. Luckily I "Bought it cheap and stacked it deep" when milsurp was cheap and available. |
|
Quoted:
Quoted:
Fleabay is actually preaty good about Enfield stuff. It is not like German stuff where you have to look for forged stuff or modern stuff trying to be passed as WW2 issue. Otherwise IMA or a quick Google/Bing search will bring up a few places that deal with Enfield stuff. The danger with rarer Enfield parts is that the Indians still have the machinery and tooling to produce a lot of it and have been doing so for a number of years. This especially true of the No4mkIT sniper mounts, optics, etc. Not super hard to tell if you know what you're looking at, but some of it might fool a casual looker. Sling and bayo reproductions are out there too. True enough, I guess I haven't had to try to find any of the rare parts. I just try to find parts for standard issue stuff like nose caps or webbing. I was just saying it isn't as bad as trying to find period correct German/Nazi stuff. |
|
you guys are great you know that? Its little bits of info that are great when a rifle is "new" to a shooter.
My uncle just gave me my first box of ammo since the shop didn't have any. |
|
|
Quoted:
Quoted:
ROF Maltby manufacturered (the M in front of the year as well as the "1" in the SN", the arrow is the acceptance stamp, AH is the SN prefix, The others are subcontractor markings SM - Singer Manufacturing S126 - S.E. Welstead Maltby rifles are known to be made from alot of subcontracted parts. thanks I thought that the SM was for singer but honestly wasn't sure. I suppose I need to find a bayonet and a sling now Front sight, and rear sight?, N67 is also Singer Mfg (Clydebank, not Elizabeth, NJ) SL and N74 on the wood is William Sykes Ltd, Yorkshire |
|
Quoted: Quoted: Nice rifle and pics, OP. Please don't refinish it. Doing so will reduce the value. The Long Branch No.4 was made in Canada. They are considered to be among the best of the No.4s. Mine No.4 Mk.I was made at ROF Fazakerly in 1994, then FTRed (Factory Thorough Repaired) there in 1948. I bought it at Woolworth's in 1985 or so. .303 Ball will smack the 200 yard steel gong around with authority. In case you don't know, here is how to properly load a .303 clip to avoid rimlock: Holy shit those things must cost a fortune if a time machine is involved in the manufacturing process! |
|
|
|
True story.
A shipment came into the gun store in the late 90's. I was just out of HS and had to have one. Cost $80 for an ugly looking thing with a near perfect bore and action. Anyhoo. Walking out into the field to shoot it and see a dove land at the top of a big white oak at least 100 yards away. I just couldn't help it. First shot through it and I was standing so I had zero intentions of even hitting it. I just wanted the BOOM. I squeeze one off and I'll be damned, big cloud of feathers! I am not saying it was skill, more luck. But by God, I was sold on the No 4 MkI that day. Later gave it to a buddy as a wedding gift. Wish I hadn't. But, there are worse things to do with one. |
|
Before After |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.